We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
range L-W-H: 1980x510x1860 mm weight: 195 kg : 15 St. weight max. in kg: 700 kg Professional workbench / tool trolley Dimensions of the right 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the right 4th drawer 41.5 x 39 x 15 cm. Dimensions of the right 5th drawer 41.5 x 39 x 23 cm. Dimensions of the middle 3 upper drawers 83.5 x 39 x 8 cm. Dimensions of the middle 4th drawer 83.5 x 39 x 15 cm. Dimensions of the middle 5th drawer 83.5 x 39 x 23 cm. Dimensions of the left 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the left 4th drawer 41.5 x 39 x 15 cm. Dimensions of the left 5th drawer 41.5 x 39 x 23 cm. Dimensions of the back wall 183 x 46 cm. Dimensions of the closets 183 x 30 x 46 cm. Dimensions of the shelf 22.5 x 63 cm. Wheel diameter 150 mm. Maximum capacity of the wheels 175 kg. Per bike. (700 kg total) Maximum capacity per tray 30 kg. Dead weight 195 kg. Overall dimensions 19 ...
new
width: 900 mm depth: 450 mm height: 1800 mm weight: 0,152 t All drawers are equipped with massive ball bearing guides. All drawers are equipped with 2 x 2 ball bearing guides. All cabinets and drawers are equipped with a lock with 2 keys. All doors are equipped with magnetic locks. The large cabinets are equipped with 3 shelves. (Height-adjustable) The small cabinets are equipped with 1 plan. (Height-adjustable) Powder-coated wear-resistant surface. Punch signs for hanging tools. Equipped with 16 adjustable feet. Overall dimensions 267 x 230 x 46 cm. (Width x height x depth) Dimensions of the 2 large cabinets with door 66.5 x 181 x 46 cm. Dimensions of the 3 small cabinets with door 66.5 x 76 x 46 cm. Dimensions of the cabinet with drawers 66.5 x 76 x 46 cm. Internal dimensions of the drawers 57 x 37 x 22 cm. Dimensions of the wooden worktop 143 x 46 x 3 cm. Dimensions of the tool shelf ...
new
range L-W-H: 1360x500x1970 mm weight: 115 kg : 7 St. weight max. in kg: 700 kg Professional workbench / tool trolley Dimensions of the upper drawers 1240 x 400 x 100mm. Middle drawer dimensions 770 x 400 x 60mm. Cabinet dimensions 500 x 420 x 540mm Dimensions of the tool wall 1050 x 610mm. Dimensions of the wall cupboards 2 pcs. 680 x 280 x 350mm. 4 rolls of 125 x 50 mm each. 4 x hanging storage containers of 10.5 x 14 x 7.5 cm. 3 x hanging storage containers of 14 x 22 x 12 cm. 2 x steel containers of 33 x 10 x 10 cm. 2 x U-hooks 55 x 25 x 6 mm. for tool wall. 4 x double hooks 85 x 6 mm for tool wall. 2 x universal hanging frame 37 cm. Wide. 2 x hanging racks for socket wrenches. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
range L-W-H: 1700 x 485 x 950 mm weight: 116 kg : 6 St. weight: kg weight max. in kg: kg Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width: 900 mm depth: 450 mm height: 1800 mm weight: 0,09 t Tool cabinet from sheet steel split in the middle. Width of 100 cm. with 2 sliding doors and adjustable shelves 8 Brand new item with minor defects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
range L-W-H: 1045 x 5050 x 1010 mm weight: 100 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
range L-W-H: 2300 x510 x 1500 mm weight: 145 kg : 20 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
width: 500 mm height: 300 mm depth: 570 mm CNC-Table Attachment Frame Producer: KOCEL Type: 2755 YOM: new Width: 500 mm Depth: 570 mm Height: 300 mm Weight: ca. 9 kg Number of CNC-tool holder slots: 16 Colour: RAL 5015 blue Additional information: - Patented, innovative universal-plug-in system: - Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past. • The frame is a solid steel-sheet metal construction and was welded firmly No Tool Holders included! The data for this ad was created with ModulMWS - the software solution of Log ...
used
chamfer lenght: 480 - 4045 mm 4 pieces of unused upper tools: tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
measuring range X-axis: 500 mm measuring range Y-axis: 500 mm control: ZOLLER 6052 manual operated rotary table: 600 mm voltage: 220 V weight: 500 kg dimensions of the machine ca.: 1,70 x 1,00 x 1,70 m - serial-no.: EGH 4032 / 058 - turntable with 2 stations Station 1 for SK 40 Station 2 for SK 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tool clamping area: SK mm weight: 0,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
measuring range X-axis: 420 mm measuring range Y-axis: 370 mm tool adaptor: VDI 40 / VDI 50 voltage: 230 V total power requirement: 100 VA weight: 700 kg dimensions of the machine ca.: 1,55 x 0,90 x 1,55 mm - Serial - No.: 1144 - digital readout KELCH Pico - VDI 40 / VDI 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Number of tools: 36 St. dimensions: 0,72 x 0,56x 0,95 m weight: 27 kg New movable tool trolley for toolholders with 40 taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Number of tools: 30 St. dimensions: 0,72 x 0,56x 0,95 m weight: 27 kg New movable tool trolley for toolholders with 50 taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tool clamping area: SK50 mm weight: 1 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...
used
x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking
used
Key data: 102 , 450 , 22
Center height: 102 mm Center distance: 450 mm Spindle bore: 22 mm Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 22.0 mm Inner taper type: 27 F Taper spindle threaded Spindle speeds: from: 90 rpm up to: 2600 rpm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1400 mm Width: 60 mm Height: 1250 mm Various accessories: Base-mounted type: Clutch and brake
used
CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Bar passage: 14.5 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 100 rpm up to: 6000 rpm Cross slide: cross travel (x axis): 100 mm Longitudinal travel (X-axis): 90 mm Taper in tailstock:: 2 MT Spindle diameter: 30 mm Spindle stroke: 80 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1370 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Bar passage: 19 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 100 rpm up to: 6000 rpm Cross slide: cross travel (x axis): 100 mm Longitudinal travel (X-axis): 90 mm Taper in tailstock:: 2 MT Spindle diameter: 30 mm Spindle stroke: 80 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1370 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Driving plate Cross slide with 90 mm stroke Hand rest
used
Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer. ...
used
range L-W-H: 1000x900x1100 mm weight: 150 kg 0: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 170 mm Distance between centres: 650 mm Swing over cross-slide: 196 mm Swing over bed: 350 mm Swing in gap: 535 mm Length of the gap: 165 mm Spindle hole: 42 mm Spindel nose for collets Taper in spindelstock MK: 3 Taper in spindle:: D1-4" Camlock Spindle speeds: number (steps): 3 stepless from: 15 rpm up to: 3250 rpm Pitch of leadscrew: 6 mm Diameter of leadscrew: 32 mm Cross slide: Longitudinal way: 140 mm Transversal way: 250 mm Taper in tailstock:: 4 MT Spindle diameter: 63 mm Spindle stroke: 140 mm Feeds: number (steps) length: from: 0.036 mm/r up to: 1.2 mm/r Frontal: from: 0.012 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 kW Total power required Machine´s weight about: 1350 kg Overall dimensions machine: Length: 1900 mm Width: 1100 mm He ...
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Drawer(s) Stepless speed variator Cross slide with 90 mm stroke Hand rest
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25.0 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1400 mm Width: 510 mm Height: 1300 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm 3-jaw chuck diameter Set of collets Drilling tailstock Toolholders
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1500 mm Width: 700 mm Height: 1500 mm Various accessories: On work bench:
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1500 mm Width: 700 mm Height: 1500 mm Various accessories: On work bench:
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 370 mm Inner taper type: 20 W Spindle speeds: from: 50 rpm up to: 1200 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: 3-jaw chuck diameter: 160 mm Set of collets: W 20 Drilling tailstock Fixed steady
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Control: BERGER Villeret Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Taper in tailstock:: 1 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.4 HP Machine´s weight about: 320 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1300 mm Various accessories: On work bench: Cross slide CNC
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 140 mm Distance between centres: 457 mm Swing over cross-slide: 152 mm Swing over bed: 280 mm Spindle hole: 25 mm Taper in spindle:: W 25 Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1800 mm Width: 850 mm Height: 1700 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Turning diameter: 90 mm Number of spindle heads Turning length: 45 mm Spindle speeds: stepless from: 600 rpm up to: 4200 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.50 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm
used
Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1400 mm Width: 510 mm Height: 1300 mm
used
Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets
used
X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)
used
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Various SK50 tool holders are available for sale. Size: SK50 Standard: DIN 2080 Various different designs, such as: - Collet chuck - Weldon chucks - Combi clip-on milling mandrels -Knife head attachment -Intermediate sleeves for MK with exfoliating flap -NC - Drill chuck -etc. All tool holders are sold without tightening bolts
used
Dieburg Pronto 5035 CNC Die-sinking EDM machine
used
Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm
used
Manufacturer: Lid Type: FP 4 MA Year Built:1987 Control: Contour 2 control Working area: 485 x 385 x 380 mm Feed speed: 1-3000 mm/min Pinole stroke: 80 mm Main drive: 4 kW Number of rotating pins: 18 Spindle speeds: 63...3150 min Tool holder: SK 40 Table load: 600 kg Weight: approx. 1850 kg Dimensions without control panel: 2000 x 2400 x 2000 mm We will be happy to send you further information and pictures on request.
used
Technical data Nominal volume flow: 630 m3/h Max. inlet temperature: 70 °C Machine´s weight about: 94 kg Dimensions: Length: 625 mm Width: 555 mm Height: 975 mm
used
Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 130 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: Working bench: Length: 200 mm Width: 700 mm Height: 900 mm Cross slide with 90 mm stroke
used
Technical data Table length: 800 mm Table width: 700 mm
used
Technical data Centre height: 300 mm Distance between centres: 2000 mm Swing in gap: 740 mm Spindle hole: 90 mm Spindle speeds: number (steps): 24 from: 9.5 rpm up to: 1854 rpm Feeds: number (steps): 24 length: from: 0.04 mm/r up to: 12 mm/r Frontal: from: 0.02 mm/r up to: 6 mm/r Voltage 50 Hz 3x: 380 Volt Various accessories: 3-jaw chuck diameter: 300 mm 4-jaw chuck diameter: 500 (2x) mm Fixed steady Toolholders Set of centers Drilling tailstock