tool grinding used for sale

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 600 mm Swing over cross-slide: 177 mm Swing over bed: 340 mm Swing in gap Spindle hole: 40 mm Taper in spindelstock MK: 5 Taper in spindle: Camlock: D 1-4" Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 5 MT Spindle diameter: 60 mm Feeds: number (steps): 48 length: from: 0.015 mm/r up to: 0.35 mm/r Frontal: from: 0.015 mm/r up to: 0.35 mm/r Rapid motion: 4 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.70 HP Total power required: 6.30 HP Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1730 mm Width: 970 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Coolant system Quick closing attachment Set of steel holders Lamp Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Milling attachment Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 2500 mm Width: 800 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 700 mm Height: 900 mm Driving plate Drilling tailstock Drill chuck Fixed steady

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Tool presetter Zoller V 520 manufacturer: Zoller type: V 520 year of construction: 2000 comm.-nr.: 0200/133/083/0416 stock-nr.: 1909 + Regular Price: 3.850,- € > Reduced Price: 1.925,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Measuring area X-Axis: 210 mm Measuring area Z-Axis: 620 mm (tower height 800 mm) tool reception: SK 50 / 0300106 / Z=+20.000 current: 220 V / 50-60 Hz weight: ca. 400 kg standing area: W 1,40 x D 0,70 x H 1,90 mm voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm features Digital measuring device Heidenhain” in X+Z Manual f ...

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

Feed drive Infinitely adjustable Electronic handwheel can be switched to 3-axis Hydr. Tool tension rigid angular table: 900 x 530mm Central lubrication automatically Vertical milling head Pinole vertically extendable 90mm stroke Chip catch bowl Coolant device Documentation Geometric acceptance protocol similar to DIN 8615 Speed geom. graded: 21 Speed range vertical/horizontal: 40-400 min-1 Tool holder: SK 40 DIN 2080 Weight: approx.2.300 kg Table load: 500 kg Painting: RAL 6011 green Dimensions: approx. 2.20 m x 2.20 m x 2.10 m Test log attached

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer

AGIETRON IMPACT 2, built in 2002 AGIEVISION Control Travel: X = 350 mm, Y = 250 mm, Z = 350 mm Max workpiece dimensions (L x W x H): 650 x 580 x 250 mm x 820 x 420 x 250 mm Max workpiece weight: 400 kg Distance table to pinole: 170-520 mm Pinole with automatic chuck Mecatool Including Astrol electrode and pallet changer Working container can be reslid for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high-performance generator with 72 A Removal rate copper/steel: 450 mm3/min Removal rate graphite/steel: 530 mm3/min Best achievable surface Ra 0.2 microns 10.4" LCD color screen, lifting keyboard and mouse, JOGBOX for the axis process 2r90di Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm

Machine milling machine lid FP 1 3-axis Active Built: 1987 with 3-axis digital display make Heidenhain TNC 113 Feed in all 3 axes Rigid angular table X - Axis 300 mm Y - Axis 160 mm Z - Axis 340 mm Speeds from 40 - 2000 rpm. Spindle holder SK 40 Weight approx. 800 kg Accessories: Central lubrication, coolant device, separate control cabinet, Pinole extendable.

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

No. 1859: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1972 Arb.-Ber.: 700 x 450 x 450 mm, Accessories: Universal recessed round table 1050 x 627 mm, Pinole feed gearbox 0.02-0.2 mm/U. Other: Spindle ISO-40, speed range 32-1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7) m/min. Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilt each +- 30°. Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

No. 3287: 1 gebr. Universal toolmilling machine Fabr. DECKEL, type FP 1, Bauj. 1988 with active digital display Arb.-Ber.: 300 x 160 x 340 mm, drive power: 1.5 kW Accessories: rigid angular table Table size 210 x 600 mm Universal table Counterholder Other: Speed range 2000 rpm Tool holder SK-40

Deep hole drill grinding machine Dimensions 7007001580mm High

No. 4427: 1 gebr. Machine milling machine Fabr. DECKEL, type FP 4 L, Bauj. approx.82 with 3-axis digital display (1 digital display) Arb.-Ber.: 1200 x 400 mm, Accessories: Rigid angular table Div. Recordings SK 40 Other: Weight approx. 3.5 to Space requirement 3 x 2 x 2 m

No. 1909: 1 gebr. Universal milling machine Fabr. HURON, type MU-55, Bauj. 1984 with 3-axis active digital display TNC-114 Arb.-Ber.: 1300 x 1000 x 550 mm, drive power: 9 kW Accessories: Table clamping surface 1635 x 700 mm, coolant device, Universal milling head infinitely adjustable feeds via DC drive Other: Speed range 30-2060 rpm Spindle holder SK-40 Space requirement approx. 3.5 x 4.5 x 1.75 m, weight approx. 4.8 tons.

No. 2456: 1 gebr. Universal toolmilling machine Fabr. MAHO, type MH 800, Bauj. 1973 with 3-axis digital display Mitutojo Arb.-Ber.: 700 x 450 x 450 mm, drive power: 4 kW Accessories: Universal recessed round table 1050 x 627 mm Pinole feed gearbox 0.02 - 2 mm/U Other: Spindle ISO 40, speed range 32 - 1600 rpm, Feeds 5-500 mm/min, rapid speed 1.4 (0.7)m/min Table cross shift by hand 225 mm, Rotational movement of the table top 360° Table swivel/tilteach +- 30° Space requirement approx. 2 x 3 x 3 m, weight approx. 3.3 tons.

Longitudinal X: 620 mm Cross Y: 420 mm Vertical Z: 380 mm Spindle taper: 0   Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC MACH-id    5450 MAKE       AVIA Poland TYPE         FNF-40 C YOP           1998 SPECIFICATIONS X-Axis          620 mm Y-Axis           420 mm Z-Axis            380 mm Table Length        800 mm Table Width     400 mm Table load        400 Kg Spindle speeds       3150 Rpm Feed rate     X-Axis     4000 mm/min. Feed rate Y-Axis         4000 mm/min. Feed rate Z-Axis          4000 mm/min. DIMENSIONS Length&n ...

Description CNC tool milling machine from Kunzmann suitable for tooling, fixture construction, training as well as mold making Travel: 600x400x400mm Speed: 50-4000 rpm Technical data Control CNC Heidenhain 310 Table 800 x 425 mm Longitudinal path (X,Y,Z axis) 600x400x400mm Tool changer no Tool holder: SK 40 Vertical spindle speeds: 50-4000rpm Feeds 2-5000mm/min Connection 50 Hz 3x 380V Spindle motor 5.5KW Machine weight approx. 1800kg Dimensions 2000x1700x3000mm

Description Universal tool milling machine of the Kunzmann brand suitable for tooling, fixture construction, training as well as mold making Control NC Heidenhain TNC 124 Table 650 x 350mm Technical data Control NC Heidenhain TNC 124 Table 650 x 350mm Longitudinal path (X,Y,Z axis) 400x350x400mm Tool holder: ISO 40 Vertical spindle speeds: 40-4000rpm Feeds 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW

Description Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Technical data Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm

Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm

Description Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 500x400x440mm Speed:40-2000 rpm Recording: SK 40 Machine with plenty of accessories Technical data Table 600x380mm Longitudinal path (X,Y,Z axis) 500x400x440mm Tool holder: SK 40 Vertical spindle speeds: 40-2500rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 3.8KW Machine weight approx. 1450kg Dimensions 2500x2700x2100mm

Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Tol measurements:2500 x 1800 weight max.:20 t range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

Maximum distance between head and table: 525 mm Longitudinal stroke: 300 mm (X) Cross stroke: 150 mm (Z) Container dimensions: 600 x 400 x 225 mm C-axis Spanning system Hirschmann Table dimensions: 400 x 275 mm Max table weight 450 kg disk filter

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.

Milling machine Aciera F3 Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed on the X-axis Manual gear on the X-axis Feed of the Y-axis can be optionally between threaded spindle or rack and pinion Fraeskop 360° drehbahr Tilting table li and re 30° rotate Engine brake Kuhlmittelpumpe With vise With tool holder with collets CE marking

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

Fabr. Walter Tip height: 105 mm

Tool drawer cabinet, drawer cabinet External dimensions: wide x depth x height approx. 105 x 63 x 72 cm 11 drawers, with ball bearings Lock missing Colour grey