138,463 used machines on RESALE, but how to find them? Machine Search
Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German
table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): ...
measuring range X-axis: 300 mm measuring range Y-axis: 250 mm measuring range Z-axis: 600 mm tool diameter: mm Table dimensions: mm Control: weight: 700 kg dimensions of machine: 2600 x 1400 x 1900 mm coolant tank: 800 x 600 x 920 mm Presetting, shrinking and measuring machine Software saturn 1 Zoller Multivision II Without toolholders. On 30. May 2022 the machine was checked by a technician from ZOLLER. Shrinking is currently not possible. The induction spool and the control unit for it must be renewed. The purchase price of a comparable new machine (incl. software) from ZOLLER is approx. 100.000 EUR, with a current delivery time of approx. 52 weeks ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 780 mm table width: 500 mm ampere: 60 / 120 A Control: Heidenhain total power requirement: 14,0 KVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A pallet of clamping devices – threaded rods – collets – clamps – clamping clamps – threaded rods – clamping devices – clamping aids – means for clamping – clamping tool
Manufacturer: SAACKE Model No.: UWIE Year: 2003 Condition: Used Stock No: 9484 Switch-on hours: 134460 h Hours: 15884 h X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
max. grinding diameter: 175 mm grinding length: mm workpiece length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
consisting of approx. 69 pieces , mostly equipped with lathe accessories such as turning steels, cutter heads, indexable insert milling cutters and holders Auction-ID: A7-49089-218
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
consisting of approx. 122 pieces , most of which are equipped with cutting tools such as cutter heads, indexable insert milling cutters, carbide milling cutters, taps, twist drills, internally cooled drills and solid drills, as well as boring tools Auction-ID: A7-49089-29
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
consisting of approx. 73 pieces , most of which are equipped with internally cooled indexable insert drills, indexable insert holders and turning steels including tool carrier system from the manufacturer GARANT Auction-ID: A7-49089-327
Key data: 500 mm, 350 mm, 300 mm
Technical data: Manufacturer: Mitsubishi Type: FA20 S Advance Year of Make: 2012 Control: Mitsubishi Advance Travel distances X/Y/Z: X 500 mm, Y 350 mm, Z 300 mm Travel U/V: +/- 75 mm Feed rate in X/Y/Z: 1,300 mm/min Conical angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Wire diameter: 0.07 – 0.3 mm Condition Condition: Used Functional: Tested and fully functional
consisting of approx. 59 pieces , most of which are equipped with lathe accessories such as turning steels, cutter heads, indexable insert milling cutters and holders Auction-ID: A7-49089-217
consisting of approx. 110 pieces , most of which are equipped with cutting tools such as cutter heads, indexable insert milling cutters, carbide milling cutters, taps Auction-ID: A7-49089-28
the exact circumference cannot be determined, as two layers including the loading of cutting tools such as indexable insert drills, internally cooled drills, milling cutters including a pallet with tool carrier boxes Auction-ID: A7-49089-221
consisting of approx. 87 pieces , most of which are equipped with cutting tools such as indexable insert milling cutters, twist drills, internally cooled indexable insert drills, turning steel holders and turning steels including tool carrier system from the manufacturer LUTZ Auction-ID: A7-49089-330
consisting of approx. 69 pieces , mostly equipped with cutter heads, long drills incl. tool carrier trolley Auction-ID: A7-49089-224
incl. indexable insert drill and indexable insert holder Auction-ID: A7-49089-365
the exact circumference cannot be determined, as two layers including the loading of cutting tools such as taps and drills including a pallet with tool carrier boxes Auction-ID: A7-49089-222
Key data: 470 A, 550 , 60
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
Boring heads in different designs and sizes, mainly from the manufacturer KELCH , including a device for indexable inserts, as well as various clamping devices Auction-ID: A7-49089-31
Machine number: 344169 Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connection: 12 kVA Control: HEIDENHAIN Table dimensions: 650 x 350 mm with 5 grooves Groove spacing: 63 mm Max. load: 250 kg Travel X-axis: 400 mm Travel Y-axis: 320 mm Travel Z-axis: 400 mm Max. distances top of the table to horizontal spindle center: 140 - 540 mm Top of the table to vertical head bottom edge: max. 430 mm Tool holder: SK 40 Speed: from 0 - 4000 rpm Quill stroke vertical: 60 mm Vertiakl head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/min Rapid traverse longitudinal and transverse: 5 m/min Feed vertical: 0 - 2000 mm/min Rapid traverse vertical: 4 m/min Auction-ID: A7-49089-475
consisting of approx. 163 pieces , most of which are equipped with cutting tools such as milling cutters, drills, taps, internally cooled drills and boring tools including the GARANT tool carrier system Auction-ID: A7-49089-207
CNC lathe with driven tools, year 2004, CNC 18i-T. Used machine. More info & price on IndustrialBuyer.
Wire EDM Machine Charmilles FI 240 SP BJ 2008
IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)
Tool quick coupler for drills 'Recording MK4 (with adapter MK5 ) Inserts : 8 MK3 pcs, 6 pcs MK2 1 MK1 pc, suitable for drilling machines, boring mills, lathes, ...
Universal tool grinder DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke for twist grinding 190mm -Longitudinal adjustment grinding spindle approx. 5mm -Vertical adjustment grinding head approx. 320mm -Transverse adjustment tool carriage approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / part head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface tool carriage approx. 500x180mm -Max workpiece diameter between the tips 130mm -Max. workpiece diameter / flying clamping (universal parting head) 620mm -Digital display -Measuring optics -Other accessories ( SEE PICTURES) -Documentation -Tool cabinet
CNC lathe with driven tools, year 2018, CNC NGC. Used machine. More info & price on IndustrialBuyer.
Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request
7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!
: 1 Bending tools with excellent value for money Induction hardened, with ground working surfaces Standard lengths: 835 mm, 415 mm and 835 mm (split). For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener, Trumpf, Wila and many more The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 240.000 N 0: 270x150x140 mm weight: 16 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 240.000 N 0: 220x150x95 mm weight: 11,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 200.000 N 0: 275x120x75 0 weight: 12 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 120.000 N 0: 210x110x100 mm weight: 6,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 30.000 N 0: 205x100x55 mm weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 200.000 N 0: 250x130x115 mm weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 120.000 N 0: 178x120x75 mm weight: 5,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 90.000 N 0: 190x100x65 0 weight: 3,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 90.000 N 0: 175x105x55 mm weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 90.000 N 0: 190x100x65 mm weight: 3,7 kg thread: M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 90.000 N 0: 168x105x80 mm weight: 3,3 kg thread: M16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 240.000 N 0: 270x150x140 mm weight: 16 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 3-axis Stroke: Longitudinal X:300 mm - Vertical Y: 350 mm- Transverse Z: 250 mm Spindle motor: Max speed: 6000rpm Continuous power :3.7 kW Peak power :5.5 kw Table: Dimensions: 300 x 300 mm Mounting: M8 centerline: 50 m Fast travel speed: 10 m/min Fast Rotation Speed B: 10RPM Tool Holder Type: BT40 Number of pitches :20
maximum number of results exceeded
please refine your search
950 € 
