tool cutter grinder used for sale

• consisting of approx. 100 VDI 40 tool holders • with collets • 8 driven tool holders • equipped with lathe tools such as turning steels

Attention: without the pallet seen in the photos. • With four-sided clamping capability • clamping surface dimensions: 500 x 400 mm

With a stock of drill chucks and drills, in various designs and sizes, sandpaper.

• consisting of approx. 64 pieces • incl. tool carrier system

Content consisting of driven VDI 40 tool holders, approx. 10 pieces, plus approx. 48 pieces of normal VDI 40 holders and additional clamping jaws

Contents consisting of cutters, partly carbide cutters, twist drills, parallel supports

Content consisting of various measuring equipment

• in various designs and sizes • approx. 42 pieces

• Lot of SK 40 tool holders • consisting of approx. 20 pieces • partially equipped with cutting tools

• In various designs • the exact scope cannot be defined

• consisting of approx. 16 pieces • equipped with cutting tools such as internally cooled drills, solid carbide cutters • incl. matching tool carrier trolley

Contents consisting of various carbide end mills, taps, twist drills, long drills, HSS cutters, reamers.

• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm • Incl. 3-axis digital readout manufactured by HEIDENHAIN

Content consisting of various taps and reamers as well as approx. 62 pieces of HSK 50 tool holders, partially equipped with cutting tools such as taps, milling cutters, solid carbide cutters.

Workshop drawer cabinet with content consisting of various outside micrometers, dial indicators, calipers, micrometers, gauge blocks, setting rings, limit plug gauges as well as other measuring tools.

Content consisting of approx. 38 pieces of SK 40 tool holders, partly equipped with machining tools, as well as twist drills, indexable inserts, clamping devices, saw blades, taps.

Content consisting of approx. 98 pieces of SK 40 tool holders, mostly equipped with cutting tools such as reamers, end mills, taps, and cutter heads.

Content consisting of clamping devices, reamers, twist drills, taps, indexable inserts and other workshop supplies

Contents consisting of various collets, clamping devices, reamers, dies, files, hand tools attention: without the Multifix tool holders seen in the photos!

consisting of three pieces, holder: VDI 40

Consisting of four clamping units with a jaw width of 125 mm each. Attention: without the pallet visible in the photos.

Content consisting of various twist drills, taps, long drills, collets, cutter heads, as well as other workshop supplies

• Consisting of approx. 43 pieces • partially equipped with cutting tools • incl. matching transport trolley

Contents consisting of various milling cutters, clamping devices, open-end wrenches.

Content consisting of approx. 50 pieces of SK 40 tool holders, partially equipped with cutting tools such as milling cutters and drills, as well as various clamping devices.

With six slots and an attached vise, jaw width: 100 mm.

Content consisting of 22 pieces of SK 40 tool holders, partially equipped with machining tools, a lot of outside micrometers, reamers, twist drills in various designs and sizes, countersinks, carbide cutters, taps.

consisting of 40 pieces

Content: consisting of approx. 82 pieces of SK 40 tool holders, partly equipped with machining tools

Contents consisting of approx. 72 pieces of SK 40 tool holders, partially equipped with machining tools such as solid carbide cutters, milling cutters, side milling cutters, and others.

• Consisting of approx. 39 pieces • mostly equipped with high-quality machining tools • incl. matching cabinet

Content consisting of a lot of solid carbide cutters, taps, radius cutters, reamers, twist drills.

• Consisting of approx. 160 pieces • mostly equipped with high-quality machining tools such as drills, cutters, taps, reamers • incl. matching workshop cabinet from the manufacturer TRAUB

Content consisting of screws, milling cutters, approx. 44 pieces SK 40 tool holders, partially equipped with cutting tools such as milling cutters and drills.

• consisting of approx. 41 pieces • incl. tool carrier system

Content consisting of various screws in different designs and sizes.

• Consisting of two pieces • with four different clamping sides • dimensions per side: 500 x 130 mm

Adapters for HSK and SK 50 as well as SK 40 tool holders Additional technical specifications: • Operating pressure: 4 - 6 bar • Frequency: 50/60 Hz

Attention: without the machine vises seen in the photos! • incl. three axis digital read out • incl. universal milling head

• Consisting of two pieces • contents of various handheld tools, different manufacturers • collets, sanding belts, and grinding wheels

Content consisting of various collets and clamping jaws in different designs and sizes

Content consisting of limit plug gauges, internal micrometer as well as a marking plate with height gauge, Plate dimensions: 300 x 300 mm

consisting of approx. 14 pieces.

Content consisting of various clamping devices in different designs and sizes, LENZKES

Contents consisting of various taps and cutters

Content consisting of various VDI 40 tool holders, milling cutters, carbide cutters, boring bars and clamping jaws.

Additional technical specifications: • Power: 1000 VA • Adapter: for SK 40, SK 50 and HSK 63 tool holders • pneumatic: 4 - 6 bar • frequency: 50/60 Hz

Clamping dimensions: 500 x 400 mm Attention: without the pallet seen in the photos

SFT CLAMP-RAIL Clamping System Manufacturer SFT Model CLAMP-RAIL Condition untested Location 72589 Westerheim DE Lot 173

• Partially shrunk, partially normal • partially equipped with cutting tools • consisting of approx. 54 pieces