tool cutter grinder used for sale

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 45 -Capaciteit 45 ton -Hydraulic -5 stations -Achteraanslag electric -Centraal smeersysteem -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Technical data in image

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Technical data: Motor power: 0,75 kW Voltage: 220 V / 50 Hz Machine width: 900 mm Machine height: 1150 mm Machine length: 750 mm Weight: 135 kg Year of construction: 1996; ready for use

4X RESERVE KNIVES SET FOR THREE-CUTTER M.MARTINI E6

-Operating hours 16499 h -Operating pressure 10 bar -Quantity 0,95 m³/min -Drive 400 V / 7.5 kW -Space requirement approx. B H 1200 x 1000 X 650 mm -Weight approx. 250 kg -Compressed air dryer brand: ULTRATROC type: SD 0060-304 Machine number: 11869-47 year: 1998 -Max operating pressure 16 bar -Safety refrigerants R 134 A -Drive 220 V / 0.17 kW -Space requirement approx. B 600 x H 75 0 x D 300 mm -Weight 20 kg -Compressed air tank standing Make: VIG built: 1998 - operating pressure 11 bar -Content 1000 l -Space requirement approx. B 800 x H 2300 mm -Weight approx. 120 kg -Ã?WAMAT

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015

SAHINLER PROFILE STEEL SCISSORS TYPE HKM 40 -Capaciteit 40 ton -Hydraulic -4 stations -Centraal smeersysteem -Voetbediening -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Producer W&H Type GF 1005 Web width 800 mm. Cut-off length 650 mm. Material 18 – 200 gsm. Speed 220 cut/min. It has 4 unwind shafts, two of them can take reels of 1000 mm. dia. The machine has been making wrapping sheets for the food industry.

Standard

Cordon bleu cutter -Manufacturer: DIL -Condition: used -Width: 400 mm -Transfer belt from the upper half of the meat

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

Hydr. Flat, - Profile and bar steel shears with cut-out device and punch punch Offer number: 15229 Make: MUHR + BENDER Type: KBLH 700 Machine no: 01562869552445 Built: 1986 Technical data: - two separate working cylinders, - it can be used at two workstations - work at the same time - Flat steel shears - knife length 520 mm - for flat material 500 x 18 mm - Profile steel shears - L- steel at 90° 130 x 12 mm - at 45° 90 x 10 mm - T-steel at 90° 180 mm - Bar steel scissors - Round steel 65 mm - Square steel 60 mm - Cut-out device - rectangular tool for material up to 12 mm - Punching hole - Punching force approx. 700 KN - Stroke infinitely variable 0 - 75 mm - punches in steel up to 30 mm in 20 mm - Extension 510 mm - Hydraulic drive 400 V / 8.5 kW - Space requirement approx. W 1850 x H 2100 x D 750 mm - Weight ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Schröter Type: wafer cutting machine wafersize: 360 x 450 mm product high: max 5-80mm Output: approx. 5 double cut´s electrical: 400 V, 3 Ph different: automatic cutting machine for rectangular wafer, with a longitudinal and a cross-cut, wafer holder, retainers and 2 pcs cutting frame, first cut strip width 32 mm / second cut strip width 30 mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°

Wedge tine plant Scharpf and Kögel - milling machine with threshing table wide 800 mm - manual handover - press 6000 mm

Treif portion cutter Model: Zebra CE Serial: 450004.60060.3837 2003, Stainless, designed to cut fresh and soft products into this slices, the precision of the machines cutting performance is achieved by means of double grounded blades and adjustable feed pressure, perfect for fixed thickness slicing of large sub-primal boneless meat either fresh or cooked, min product -5'C, cutting thickness 2mm to 200mm, max product 610mm x 145mm, comes with spare blades, 3ph

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Machine complete, in good working conditions.

Business card 55 mm module Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Sheet Metal- & Profile Steel Shear Mubea KBL 11 with notcher and punching press manufacturer: Mubea type: KBL 11 mach.-Nr.: 107/3019/7 year of construction: ? comm.-Nr.: 0250/125/200/0575 stock-Nr.: 1911 + Regular Price: 2.750,- € > Reduced Price: 1.375,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Flat Steel Shear blade length: 220 mm sheet metal up to: 11 mm flat steel up to: 125 x 13 mm Profile Steel Shear angle irons up to: 80 x 9 mm T-iron up to: 80 x 9 mm U- and I-iron up to: NP 10 hubs: ca. 55 / min. Steel Bar Shear steel bars up to: 35 mm square steel up to: 32 mm Notcher  ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

------------------

End Tenoner Brand: Martin Model: T27 Cut-off saw Saw blade diameter: max. 350mm Cutting height: max. 100mm Milling spindle: Speeds: 3000 - 4500 rpm Spindle diameter: 40mm Tool diameter: max. 390mm Clamping height: max. 135mm Height adjustment: 145mm

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm

ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm

Manufacturer: Polar Model: 72EL Defects: knife does not trigger Price: on request

DATA ON THE MACHINE Machine type: Profile steel shears / unclinking machine Manufacturer: MUBEA Muhr u. Bender Model: BF11N Condition: used Price: 1,450 Euro net plus VAT Location Warstein , Germany Reference M-MUB-1220 Description We offer you a used profile steel shear from the manufacturer MUBEA Power 32t Weight approx. 1t Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Towed chopper TP 760 P, wood chopper with feeder approx. 160x260 mm, combination with Reiser SCH 230 container tipper. Container loading capacity 3.5 m3, high emptying to approx. 224 cm, additional loading flap in the rear. Tyres 10.0x75-15", parking brake, Total weight 2,800 kg. Machine in non-operational condition. More bush hackers and wood chippers in stock!

TECHNICAL DATA: Table dimensions mm: 1000 x 2000 Tool diameter max mm: 250 Spindle motion mm: 160 Rotation speed max rpm: 11.000 Motor KW: 9

TECHNICAL DATA: Moulding aggregates: 3 Groove aggregates: 1 Hopper feeder Total connection kW: 4,7 For windows production with dividers

Offer via gebr. Pipe separation and chamfering machine Fabr. GF Type AVM RA6 Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed Speed levels electronically 1 - 6 Power 1600W used, in good condition.

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Chain cutter Haffner Type KF 20 Machine No. 16809 With door rest Engine strength 1.7 kW Weight 100 kg Dimensions 900 mm x 800 mm x H 1950 mm

Type New Bowl choppers Warranty 12 months Height 1240 Width 1900 mm Length 1170 mm Weight 1200 kg Capacity 80 l Voltage Electrical: 400V 50Hz 3N Installed Power 14 kw Main material Stainlees Steel

Category New machines Subcategory Mechanical Treatment of Meat Type New Bowl choppers Warranty 12 months Height 1350 Width 2290 mm Length 1300 mm Weight 1800 kg Voltage Electrical: 400V 50Hz 3N Installed Power 39.9 kw Main material Stainlees Steel

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

see photos