We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,555 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
CONIFLEX CUTTER SHARPENER Make : GLEASON Model : 104
used
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
used
Bale cutter Year: 1980’s 22 Ton cutting force Pressure pump (77 lit./min.) Engine = 15 HP Table (working) dimension: 1150 x 1150 x 850 mm knife width : 800 mm Complete with motor and starter Machine dimension: 1700 x 1150 x 3500 mm (LWH)
used
SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available
used
Manufacturer: Schneider-Senator Model: E-Line 78 year: 2009 Available: 01.May 2022 Location: germany Price: on request
used
Gluing cutters Diameter 120mm Width 50mm Bore 50mm Z4 2 trapezoidal tines G&-4965
used
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
used
Equipped with: Digital computer program with TFT color screen Security photocells Central table with air Side tables with air - Perfecta BSH 3 pile lift ( 2011) - Baumann vibrating table with air removal roller - Unloader Perfecta BA 3N ( 2011)
used
Max size 330 x 460 mm Details Dedicated diecutter video available
new
-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...
new
Guillotine for slicing frozen meat with a capacity of 8000 kg. per hour It can cut molds of frozen meat with a temperature of -15°C to -3°C without defrosting the product during processing. The processed product is unloaded directly into Laska type carts. Technical parameters: Models IB – 4 IB – 8 Productivity- kg / hour up to 4000 up to 8000 Capacity kW 15 15 Max. weight of pieces gr. 200 450 Min. block temperature: -18 °C -15 °C Block dimensions mm. 600 / 400 /200 Machine dimensions: length 1400 width 1130 height 1680 Weight of the machine kg. 720
used
Fezer chain milling machine Motor power 1.5 kW With door support Weight approx. 150 kg
used
REF-2278 TREIF PUMA-CE AUTOMATIC CHOP CUTTER Automatic chop/cutlet cutter by TREIF Model: PUMA-CE Type: 1930 Year: 1995 220/380V. 3-phase. 50Hz Overall dimensions: length 2,600mm, width 900mm, hauteur 1,400mm
used
The machine is adapted to crush frozen meat blocks to a temperature of -20 degrees Manufacturer: Magurit Model: 545 Height: 1800 mm Width: 1100 mm Length: 2590 mm Electric power supply: 400V 50Hz 3N Power: 5.5kW Efficiency: 5t
used
3 trimmers horauf SN140, automatic , in very good condition, year 99
used
Manufacturer: Fatosa Type: TBG 480 Year of construction: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum size of blocks: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: length 1350 x width 700 x height 1750 cm With raised front cover - Height 2117 mm The guillotine is only equipped with a cross-cutting knife. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 phone 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Stock # U2397-4 Used stainless steel micro cutter/emulsifier by Haarslev A/S (DK) model HF 175. Machine is designed for emulsifing a product, paste type. Can run on meat, chicken, pork etc. Output depends on product and can reach 3-4 tons per hour. Feeding inlet into milling chamber has diameter 105 mm. Machine has stainless steel shaft driven directly by el motor 55 kW, 2950 rpm, 380 V, 50 hz. On the shaft there are mounted two sets of six blade knives and screens. First screen has diameter of holes 1.2 mm. Second screen has holes with diameter 0.8 mm. Knives and screens are designed in non-corrosive steel. Body of milling chamber designed in stainless steel. Discharge via outlet with diameter 65 mm. Machine has local control panel and is mounted on four legs. Includes technical documentation. Last time used in food industry.
used
Oppolt HM Adjustable groove cutters 160 - 8 - 15mm 30 mm bore t= 30mm Inserts G&-4996-M356V
used
SOITAAB CNC plasma cutting with 2 generators Year = 1998 Plant size: center distance = 6000 mm. Useful length 24 thousand mm. Implant length = 26 thousand mm. Speed allowed with double motorization 20 thousand mm./ min. Operating speed up to 5000/6000 mm./min Numerical control = OSAI 10/310 TFT with 10.4 "color monitor Plasma generators No. 2. - Hyperterm HT 2000 System in operation, complete with bench and NOVA VIT fume extractor complete with star valve, direct discharge of cutting dust in standard big bags.
used
Product number: 2462B Type: KB428 Serial number: C722 Block size: max 530 x 530 mm Power: 3 x 380V, 50Hz, 22kW Dimensions:950 x 1450 x 1900 mm 1 speed on cutting drum Product bottom exit in 200 litre tote bins
used
Treif Zebra portion cutter Serial: 451107 2011, Stainless, designed to cut fresh and soft products into this slices, the precision of the machines cutting performance is achieved by means of double grounded blades and adjustable feed pressure, perfect for fixed thickness slicing of large sub-primal boneless meat either fresh or cooked, min product -5'C, cutting thickness 2mm to 200mm, max product 610mm x 145mm, 3ph
used
year 1994,Digital program,Air table ,Light guards,Side tables with air,2 knifes in complete working conditions. Available immediately
used
Digital program 999 positions Air table, In production Free of damages
used
- German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting to the line and zyzgka - loading with a conveyor with spacers - package width 600 mm - split ironing length Dimensions of the folding machine - length 42000 mm - width 6000 mm - height 2100 mm
used
Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!
used
Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!
used
Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available
used
Plasma cutting device TELWIN Type Plasma Arc 65/1 Masch. No. C 10048-88 Year of construction 1988 Power 60 Amp. = 40 % ED 45 Amp. = 60 % ED 32 Amp. = 100 % ED Adjustment range 3 steps Hose pack length approx. 4.5 meters Compressed air connection approx. 6 bar Mains connection 380 Volt, 50 Hz 32 Amp. Plug Space requirement L x W x H 550 x 540 x 910 mm Weight approx. 90 kg good condition; used
used
Plasma cutting device MB - Welding technology type Plasmaprof 50 Identical to CEBORA Masch. No. 244311 Year of construction approx. 1992 Power 50 Amp. = 35 % ED 30 Amp. = 100 % ED Setting range 2 steps Hose package length approx. 6 meters Compressed air connection 4.7 bar Mains connection 400 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 500 x 350 x 700 mm Weight approx. 80 kg good condition; used
used
Plasma cutter CLOOS type CPS 40/80 Year of construction 1990 Power at 60 % ED 80 Amp. Power at 100% ED 40 Amp. Adjustment range 40 and 80 Ampere (2 steps) Cutting power for steel max. 25 mm Hose package length 5.5 meters Mains connection 400 volts with 32 Amp. Plug hand torch CLOOS Dimensions L x W x H 700 x 600 x 750 mm Weight 160 kg good condition; used
used
Plasma cutter MESSER GRIESSHEIM Type Plasmastar HA 95 Fabr. No. 4040 Year of construction 1990 Power 95 Amp. - 60 % ED 45 Amp. - 70 % ED Setting range 2 steps Cutting power 25 mm Handheld torch PHC 95 /140 Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length - Operating instructions Space requirement L x W x H 900 x 480 x 850 mm Weight 160 kg very good condition; used
used
Kronen PGW grid cutter Stainless grid cutter, pneumatic cutting of fruits and vegetables into various cutting forms, mobile
new
The new Serrmac TCS TR series milling drill has a sturdy structure that allows heavy machining and a prismatic section column. Standard configurations: Diaphragm control panel with digital display to display the number of spindle revolutions (only on VS – VR – E); Tapping with adjustment of the working depth (only on version E with Inverter); Automatic mechanical spindle descent (0.05 – 0.1 – 0.2); Refrigeration tool system; LED lighting system 24V. FEATURES IN PHOTOGRAPHY! Each Serrmac drill can be supplied customized according to every need! Contact us for more information and / or for a custom quote.
used
WUPA PS 4.1 year 1973 - 2003 refurbished size 800 – 1,120 mm Min. size 360 – 500 mm Min. grip 14 mm weights 100 – 1,000 g/m2 Thickness max. 3 mm pressure 240 t Speed max. 4,000 sheets/h Stripping
used
Profile steel shears
used
Machine type: Profile steel shears with punching Manufacturer: PEDDINGHAUS Model: 5-fold combined profile steel shears with punching Condition: very good Offer type: used machine Specifications: Achievement: round = Ø 20 mm, flat = 80 x 12 mm Angle steel = 50 x 50 x 6 mm T-steel = 50 x 6 mm Drive type: by hand Note: two machines on a stable, mobile substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be visited and demonstrated by us. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.
used
The all-rounder among the cutting machines with a plant air table of 3300mm. ER cuts veneer, PVC, solid plastic, polystyrene, acrylic, honeycomb structure sheets, papers, plastic films, cardboard, cardboard. Detailed description can be found on the homepage of the machine manufacturer
used
Cutting machine EBA 550 Year of construction 2007
used
Specifications: - Flat steel shears cut up to 350 x 6 mm - 200 x 12 mm - Profile steel shears - cuts - L-steel at 90° to 80 x 8 mm - Bar steel shears - cuts - round steel up to 30 mm - Square steel up to 25 mm - punching force 380 KN - radius 175 mm - perforates in steel up to 27 mm Ø in 10 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 500 x H 1280 x D 1000 mm - Weight approx. 900 kg
used
SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 -Volt. 380/50
used
SECOND-HAND TRANSVERSAL MILLING MACHINE FOR CHAIR COMPONENTS CAMAM MOD. FS-S/1U - CE RULES - Max tools diam. 200 mm. - Rotation speed rpm/1 500 - Motor 3 kw - Exaust hood diam. 100 mm. - Exaust air cosumption m3/h 900 -Volt. 380/50 - S/N 99008 - Year 1999
used
SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P -Volt. 380/50 - S/W 76 - CE year 2003
used
Inv. Num. : 6484 Type: UKZ-1/305 Producer: MAVET Generated: 2017 Parameters: Power consumption: 2.49 kW Number of robot axes: 6pcs Robot reach: 1420 mm Load capacity: 12 kg Weight: 428 kg Equipment: Robot Fanuc M-10iA/12
used
Max Sheet: 750x1050 mm Min Sheet: 350x400 mm Min Paper: 90/100 gr/m2 Max Mater: 1,8 mm Max Wave: 3,0 mm Preasure: 300 Atm Centerline-System Quickspanner in Stripper Blanker 30 cm elevated Max speed: 9000/hour Working-hours: 53.000
used
Jamming machine FESTO UP30 ZF Spindle length 200mm Spindle diameter 40mm 7.5kw motor Two pneumatic clamps of the material Adjustable pinning depth Working table 630x330mm Weight 350kg
used
Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools
used
High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz
used
Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz
used
Punching force: 550 kN (punches e.g. 30 m in 16 mm material), with search device via foot switch for graining Projection: 550 mm Cuts 350 x 13 mm or 230 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, so that punching and shearing can be carried out independently Assortment of tools is included in the price
used
Name: Glass cutter Type: Silver cut No. 550.0 Manufacturer: Bohle-Werkzeugfabrik Condition: used Components: - 1 x base cross (complete with 2 x suction cup, base rail, cross rail) - 4 x clamping piece with suction cup - 4 x extension rail 100 mm - 2 x extension rail 200 mm - 1 x cutting ruler - 1 x slider for small ellipses - 1 x slider for large ellipses - 1 x silver cut glass cutter no. 425.1 with ball-bearing wheel carrier Note: There are no 400 mm extension rails included! Application: - for circular and elliptical cut-outs made of glass plates Original price: 380,00 € tax excl. Price: 239,00 € (VB) plus VAT ex location Grunow (Brandenburg) (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted. ...