tool and cutter used for sale

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 40.000 liters used. The container is used and cleaned from the inside. Length: approx. 870 mm Diameter: approx. 2500 mm Weight: approx. 7000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location Wars ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

Cat.-No. 09-1590-6L new Material: V2A (AISI 304) 1.4301 – Surface inside and outside IIIC upper bottom: Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 lower bottom: With Conical Bottom 45°and rest outlet underneath with forklift and pallet truck content: 1500 l 1100 mm diameter 2250 mm total height Weight 130 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature control/digital temperature control/analog All prices are valid Ex-Works, excl.VAT Delivery: from D-97753 Karlstadt-Karlburg Freight Charges: depending on dimensions and destination Subject to prior sale

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

<br>7 stations chain 6 investors P 15 1 folding feeder FF 100 Bulletin station 2 Heftk pfe Hohner Three knife trimmer Band display<br><br>Still in operation: No.<br>Available: immediately

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

in 2005 general overhauled Still in operation: Yes Available: sofort

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Maho UIniversaltisch

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, &hellip; High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange

Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition

; operational

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

&#279; engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping &#279; velen styles (the rubber surface), diameter 30 mm. the preparation of &#302; (i) the measurements x 350 x 655 mm, 505. the preparation of &#302; weight 20 kg.

Formcook combi grill Belt width: 1100 mm Grill length: 11.000 mm Heating: thermic oil Cooking time: 3-50 min. Maximum temperature of 250 degrees Celsius Power: 25 kW Dimension: 12.825 x 1740 x 2323 mm Weight: 10.000 kg

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...