tool and cutter used for sale

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version.

2x 1213ETN9 SKF 1x 2208EKTN9/C3 SKF 1x 37X47X4HM4R SKF 58x 51110J9 SKF 1x 7216BECBJ SKF 2x 7216BECBJ SKF 1x AHX2319 SKF 5x ECB208 SKF 1x FRB10/130 SKF 3x FRB10/215 SKF 1x HJ207 SKF 1x HK0808 SKF 2x LAPM2 SKF 4x N307ECP SKF 2x NATR5 SKF 1x NK110/40 SKF 5x NK22/20 SKF 1x NKXR30 SKF 1x NU2304 SKF 1x NU310ECP/C3 SKF 1x NU310ECP/C3 SKF 1x NU324ECJ SKF 1x NU328ECJ/C3 SKF 13x PCM141620E SKF 4x RC-4X4C SKF 2x U203 SKF 1x YAR212-204-2F SKF 1x 1211TV FAG 1x 1306K. TV. C3 FAG 4x 1306K. TV. C3 FAG 1x 21310EK. TVPB FAG 1x 21318EK. TVPB FAG 1x 22212E1K. C3 FAG 1x 22317-E1-XL-C3 FAG 2x 31313A FAG 11x F-45980 INA 6x STO35 INA 2x BAM2012 IKO 2x IRT4030 IKO 1x AHX2319 RHP 2x SFT1.1/4EC RHP 16x NU207E. TVP NKE and more

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5)

Marking plate / measuring plate with tripod and holder Used marking or measuring plate with attached tripod and adjustable holder, suitable for marking, testing and measuring work in tool and machine construction.     •    Design: marking plate / measuring plate     •    Surface: finely machined, grid structure     •    Dimensions plate: approx. 250 × 360 mm     •    Plate thickness: approx. 34 mm     •    Material: Steel / cast     iron •    With column stand and adjustable holder

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5)

" Industrial bench grinder / brushing machine with 3-jaw chuck and accessories Heavy, free-standing industrial grinding or brushing machine in solid cast iron design. Equipped with: • 3-jaw chuck • Side protective cover • Mechanical feed option • Electric foot switch (emergency stop version) • Multiple grinding/brushing rollers (see pictures) Machine was used for grinding/brushing. Condition: Used, heavily soiled, uncleaned. Sold as shown with existing accessories (rollers). Type: Stand-alone machine Drive: Electric motor (belt drive) Clamping adapter: 3-jaw chuck Operation: Foot switch Construction: Heavy machine body made of cast iron • Dimensions in mm (LxWxH) approx. 600 x 750 x 1100 mm "

Equipment: Drill chuck with ISO-30 mount Digital depth display Left/right switch. Emergency stop Swivelling drill head Spindle protection. Feed via handwheel. Small tool case Machine base optional. Drilling capacity in steel 45mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 30 Spindle speeds 75 - 1600 rpm max. cutter diameter 80 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm max. distance between work table and spindle nose 460 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 320 kg Space requirements approx. 1.0 x 0.8 x 1.45 m

1x 1308EKTN9/C3 SKF 1x 21317EW SKF 1x 52204 SKF 1x 53206 SKF 43x FRB8/62 SKF 1x FYKC35NTR/VE495 SKF 1x LBBR10 SKF 3x NA49/22 SKF 5x NA49/22 SKF 1x NATV15PP SKF 2x NK8/16TN SKF 2x NU1008MP SKF 12x PSM182430 SKF 15x RC-7X7C SKF 3x TMFT12A SKF 7x EGB1208-E40 INA 150x GRA110NPPB INA 2x KR72X INA 5x LR17X20X205 INA 2x NKI70/25-XL INA 2x NKXR40 INA 1x NX20-XL INA 2x PBS17 INA 6x RSTO45X INA 1x 4T-3782 NTN 10x JTU518 SNR 19x SC611SV SNR 2x 2202 NSK 2x NJ315ET C3 NSK 3x LRT152012 IKO and more

" Double-spindle deburring machine / grinding and brushing machine Stationary deburring or grinding machine in heavy industrial design with two horizontally arranged spindles. A main spindle with clamped abrasive media, an additional spindle (according to the switch "additional spindle") can be switched on separately. Machine with protective tray/work tray, emergency stop, main switch and separate control cabinet. Extraction connection available (pipe connection on the side). Control panel with: • Main switch • Emergency stop • On/off button • Switch additional spindle • Brake switch • Operating hour meter (Kübler Codix) Solid welded steel construction, can be screwed together stably. Used condition with usual signs of wear. External dimensions approx.: 1200 x 1100 x 1300 mm (W x D x H) Double-spindle design Electrical connection via separate control cabinet Extraction con ...

" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm "

Drilling/milling machine with: • Digital display • Digital depth gauge for quills • Adjustable guides through wedge strips • Large 12-step speed range from 75 - 3200 rpm • Extremely smooth running due to hardened and ground gears running in oil bath • Right-counterclockwise rotation • Prism guides in all axes • Gear head can be swivelled 90° • Chip protection with safety circuit Machine base optional. Not included. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle holder SK 40 Spindle speeds 75 - 3200 rpm Table adjustment transverse 500 mm Table adjustment longitudinal 230 mm Table clamping area 720 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1 kW Machine weight approx. 0.35 t Dimensions approx. 1.1 x 0.9 x 1.2 m Condition: never used / new (5)

11x VKBA1361 SKF 1x VKBA1436 SKF 1x VKBA1436 SKF 9x VKBA1485 SKF 1x VKBA3907 SKF 1x VKBA3907 SKF 8x VKBA625 SKF 5x VKC2083 SKF 140x VKC3620 SKF 1x VKMA04200 SKF 1x VKPC83428 SKF 1x VKPC83615 SKF 3x VKPC84208 SKF 2x VKPC84618 SKF 2x VKPC85611 SKF 3x VKS6150 SKF 2x F-112215 INA 4x F-203222.5 INA 9x F-83001.2 INA 1x 38KWD02G3CA126 NSK 10x CBU472921C Koyo and more

Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5)

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5)

Lots of industrial drills & modular systems (Sandvik, Kennametal) Mixed tool set of high-quality industrial drills: – several Sandvik WSP drills R411.5-27534 – Kennametal KSEM modules + interchangeable heads – various solid carbide twist drills Holex / Sandvik– large HSS/PM twist drills up to approx. Ø30 mm – reamers and special drills 1) Sandvik Coromant several WSP drills R411.5-27534, Ø ~27 mm, beam P20 various large twist drills 18–30 mm Single solid carbide drills in a yellow case Drills in the range 20–25 mm (coated, TiN/TiAlN) 2) Kennametal – SE-Drill Modular KSEM1983HPM – Ø19.83 mm KSEM1830HPM – Ø18.3 mm KSEM1100HPM – Ø11.0 mm several modules + interchangeable heads KC7235 modular holders (2 pieces) 3) Holex solid carbide twist drill bit 122310 19.5 mm other solid carbide twist drills 17–20 mm 4) Other tools Indexable insert drills (with mounted  ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the interna ...

This Palletising line consists of, Box transport belts, KRONES, Type 465, Model Κ465-924, Y.o.M 1999, Maximum width 350mm/ total length 13m/ 6 pieces (2m/piece)/0.75KW- 400V/ control panel, Palletizer, KETTNER, Type BELADER PRESS ON, Model 99/0441/004, Y.o.M 1999, Available control panel (30 pulses/hour in 61.5L box), Empty pallet station with finished pallet exit roller conveyor, KRONES, Type 454, Model LPMT, Y.o.M N/A, Maximum number of empty pallets: 15pcs/ Available control panel/ 100pallets/hour, Strech Wrapping Machine, FRANPACK, Type 101, Model 991553, Y.o.M 1999, Available control panel, Protective barriers with safety switches, Available with the machines, Available: Immediately , Pallet Sizes: 100 x 120 cm , Capacity: 100 pallets per hour , Condition: Good

Machine 1 Elopak Carton Filling Machine - Manufacturer: Elopak - Machine type: carton filling machine - Control system: Siemens Simatic Panel PC - Configuration: Dual lane (Line 1 and Line 2) - Total carton counter (machine lifetime): over 461 million cartons - Condition: Used, currently installed and in production - Total picker counter (lifetime): 462,280,647 cartons - Total outfeed counter (lifetime): 461,210,559 cartons Machine 2 Meurer MTP 25-B 400 Tray and Wrap-Around Case Packer - Manufacturer: Meurer - Model: MTP 25-B 400 - Year of manufacture: 2011 - Main motor operating hours: 68,742 - Air supply: 6 bar - Speed: up to 25 cycles per minute - Formats: simple trays, wrap-around cases, two-piece lid and base configurations - Included: Meler Micron+ TO hot melt glue unit - Control: touch screen operator panel - CE marked, made in Germany Find more here - / Contact us at -

Sehon Painting and drying system SE-Professional Futura built in 2007 Professional combined painting and drying line with partition wall from Sehon with large cabin capacity and PLC control. Manufacturer: Sehon Innovative Lackieranlagen und Technik Model: SE-Professional Futura Year of Make: 2007 System type: Combined painting and drying system Cabin interior dimensions: 14,000 x 5,000 x 4,400 mm Cabin height outside: approx. 4,900 mm Entrance/exit gates: 2 pieces front and rear Door opening: 4,000 mm high x 4,500 mm wide Gate design: insulated steel sandwich construction Door leaf thickness: 54 mm Housing: mineral wool insulated steel cassettes Cassette thickness: 50 mm Colour housing: RAL 9010 pure white Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating Modes: Painting, Drying, Manual Operation ...