tool and cutter used for sale

Once the three cables have been inserted into the special clamp, the unit performs the following operations in fully automatic mode: straightening the three cables, cutting to size, stripping the ends, inserting them into the terminals, crimping and subsequent extraction of the finished product; The design of this unit followed three main guidelines: high quality of the seaming, maximum reduction of cycle time and containment of overall dimensions The short distance between the cable insertion and exit point allows the coils to be processed directly without the need to unwind them and also allows crimping of different lengths on each terminal The unit is built in compliance with the Machinery Directive and is CE marked Auction-ID: A1-46617-27

Banderolierer BandAll BA 64-35/30; serviced and inspected by BandAll after-sales service; Frame 640x350mm; Belt width 30mm; suitable for paper or foil; Compressed air required. Banding machine BandAll BA 64-35/30; tested and checked by the support of BandAll ; frame 640x350mm; band width 30mm; used for paper or foil; compressed air needed.

Additional Lot Information – Industrial & Technical Lighting Lot composed of different types of new boxed luminaires, from surplus professional stock. Includes models for installation in offices, industrial buildings, workshops, warehouses and commercial spaces. Visible contents of the lot: - Recessed luminaires DOES LIGHTING S.L. model MATIS - ELGO LS surface screens - ELGO RAPID218 luminaires - ELGO URINE 414NPP luminaires - Luxalite IP65 T8 2x18W waterproof screens - HFP electronic equipment - Various formats of fluorescent ceiling and luminaires Features: - New material in box - Professional and industrial use - Different formats and powers - Compatible with ceiling and surface installations - Various units and references included - RoHS marking and EU manufacturing on various models Status: - Unused material - May present light wear or exterior dirt in storage  ...

Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, t ...

Category: Road Sweeper Truck Brand / Model: MAN TGM 18.240 Type: Street sweeper (vacuum system) Configuration: 4x2 rigid truck Engine: Diesel engine Power: approx. 240 HP Year: 2007 First Registration: 01/03/2008 VIN: WMAN08ZZ78Y199859 Mileage: 263,198 km (visible) Gross Weight: 15,000 kg Design Gross Weight: 18,000 kg Train Weight: 18,500 kg Design Train Weight: 21,500 kg Axle Load 1: 5,600 kg (design 7,100 kg) Axle Load 2: 10,600 kg (design 11,500 kg) Tyres: 10R22.5 (144/142) Dimensions: Length: 7,300 mm Width: 2,240 mm Equipment: Vacuum sweeping system Equipment: Side brushes Equipment: Suction hose Equipment: Water tank system Condition: Used Remarks: Municipal sweeper, suitable for road maintenance Own mass: approx. 9,000 kg Auction-ID: A7-45990-28

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-201

Type: Large lot of EDM clamping systems and precision fixtures Manufacturer: System 3R and various manufacturers Components included: Precision vises, EDM holders, clamping blocks, rotary fixtures, tooling plates and adapters Application: EDM machining and precision tooling setup Material: Hardened steel Condition: Used, workshop condition with visible signs of use and storage marks Remarks: Mixed assortment of precision clamping and positioning equipment for EDM and toolmaking applications Auction-ID: A7-45993-164

In various sizes and designs. Lying in approximately 41 boxes, including addressed. Auction-ID: A1-46604-181

Including FE Powertools, Metalworks, Promega, including various core drills, drill heads, metal drills, various saw blades for pipes including Exact,..., in various sizes and types, lying in 7 sorting trays Auction-ID: A1-46604-129

In various types and grains including Bora-7 75mmx2000mm P100, PZ528 75mmx2000 P100, CZ677 75mmx2000mm P24, PS994 150x2000mm P120, PS992 75x2000mm P50,... Auction-ID: A1-46604-128

1 sweeper AND 1 spot cleaner/steam cleaner 1200W. This compact sweeper is ideal for your work floor or outdoor area. The 2 brushes on both sides with a working width of 1000mm allow you to sweep a lot at the same time, also in combination with the rollers at the bottom of the machine and the large collection tray provides a lot of convenience in cleaning your floors. Unused in box. And 1 steam cleaner, efficiently cleans stubborn dirt stains, e.g. for carpets, stairs, sofas, mattresses, curtains, car, lime and grease. Compact size. 220 V - 50 Hz Rated power: 1200 W Clean water tank capacity: 1600 ml Waste water tank capacity: 900 ml Power cable length: 5 m Hose length: 1.7 m 2 extra brushes Unused in box Auction-ID: A1-40256-88

Auction-ID: A1-45771-69

Including FE Powertools, Metalworks, Rotobroach, WL, including various core drills, holecutters,..., in various sizes and types, lying in 7 sorting trays Auction-ID: A1-46604-131

Type: Precision EDM / wire EDM clamping and positioning fixtures set Manufacturer: System 3R Configuration: Mixed modular fixture assemblies marked 6.1 / 6.2 / 6.3 / 6.4 Application: Workpiece positioning and clamping for EDM machining operations Construction: Hardened precision ground steel bodies with sliding and adjustable elements Components included: Multiple fixture bases, positioning modules and clamping units Mounting: Integrated mounting rails and locating interfaces Condition: Used, with visible machining traces, scratches and storage marks Remarks: High precision modular tooling system suitable for EDM and fine machining environments Auction-ID: A7-45993-170

In various sizes and designs including veneer, MDF and plywood, Including approximately 250 x 90cm, 220 x 60cm and 187 x 185cm Auction-ID: A1-46604-437

Including various fiber discs 115mm Cubitron 2 and 125mm Cubitron 2, various surface discs Scotchbrite Rolock and conical flapdisks Cubitron 2 Auction-ID: A1-46604-153

Type: EDM / precision clamping and fixture components set Manufacturer: EROWA / System 3R Configuration: Mixed precision fixture plates and clamping modules marked 7.1 – 7.5 Application: Workholding and positioning for EDM and precision machining operations Construction: Hardened and precision ground steel assemblies Included components: Large fixture base, rack-type clamping element, modular clamp blocks and positioning rail System compatibility: EROWA tooling interface and System 3R fixture components Condition: Used, with visible wear marks, scratches and workshop traces Remarks: Suitable for integration into EDM fixture systems and custom machining setups Auction-ID: A7-45993-171

Scrubs, vacuums and dries all dirty surfaces. High cleaning performance of 2,000 m² per hour - 5 hours of continuous use thanks to 2 powerful batteries - 50 liter freshwater and waste water tanks each. Working width: 510 mm - rotating brush - Battery charger unused Auction-ID: A1-40256-53

Including approximately 2075x grinding disc 125x1.6x22.23mm Extreme and 170 various sanding discs Nylon 135x22.2mm Soft and Hard Auction-ID: A1-46604-118

Equipped with separate pump, Auction-ID: A1-45771-7

Ring-open-end wrench set 25-pcs. 6-32 mm, DIN 3113A, CV, unused Auction-ID: A1-40418-264

Including, Rotabroach, 3Keego, Nachi, FEPowertools, Vertex, Magtron, including various core drills, drill heads, drills, adapters rail and raptorcutterz,.., in various sizes and types, lying in 8 sorting trays Auction-ID: A1-46604-190

Including Chem, Intersaw, Elematic and HMT including cutting oil, various lubricants HMT, various cleaners including HD cleaner, microlube and protector Auction-ID: A1-46604-148

Industrial vacuum cleaner 80L wet/dry AND a spot cleaner, powerful steam cleaning. Vacuum cleaner: 3 motors a 1000w / per motor can be turned on, for wet and dry use. Spacious capacity – 80 liter tank. Safe & certified – The vacuum cleaner complies with CE standards, which guarantees safety and reliability. Industrial design – Built for the toughest conditions. Solid wheels, strong housing and easy-to-clean filter system. AND Steam cleaner 1200W: efficiently cleans stubborn dirt stains, e.g. for carpets, stairs, sofas, mattresses, curtains, car, lime and grease. Compact size. 220 V - 50 Hz Rated power: 1200 W Clean water tank capacity: 1600 ml Waste water tank capacity: 900 ml Power cable length: 5 m Hose length: 1.7 m 2 extra brushes Auction-ID: A1-40256-123

Including HMT, Somta, FE Powertools, Promega, Rotabroach, including various core drills, hole cutters, impact drill bits, metal drills, Raptorcutters,.., in various sizes and types, lying in 7 sorting trays Auction-ID: A1-46604-134

Stahlkaiser professional stitch ring ratchet set 6-32mm Auction-ID: A1-40418-265

Type: Precision EDM clamping and positioning fixture set Manufacturer: System 3R Model: Unknown Quantity: 6 pcs assorted fixtures and mounting plates Construction: Hardened precision ground steel Application: EDM / wire EDM workholding and positioning Features: Adjustable sliding bases, mounting interfaces and precision locating surfaces Condition: Used, good overall condition with normal signs of use Remarks: Includes 2 complete clamping fixtures and 4 mounting plates/adapters as shown in pictures Auction-ID: A7-45993-125

60 litres, 1500 watts, unused Auction-ID: A1-40418-314

automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-244

Total approx. 6x various table; approx. 15x various seating furniture Auction-ID: A1-45771-196

Including Sait, including 6x sanding cylinder FT-Saitpol 100x100x19.1, 6x flap sanding cyclinder 100x100 type A, various fiber discs 115x22mm including grit 36 to 50 Auction-ID: A1-46604-114

Consisting of: (9x) plastic containers and (1x) wooden transport box 1500x1000x17400mm. Auction-ID: A1-45979-133

Consisting of: (1x) Anton Paar density meter, type: EasyDens, (1x) Vos stirring plate / magnetic stirrer with heating, type: 12003,(1x) Dahongying platform scale TCS, Including: various pH meters and temperature meters, (1x) refractometer, measuring cups, measuring cylinders and funnels crown capper, laboratory rack and accessories. Auction-ID: A1-46397-11

This room is located on the first floor, there is no elevator Auction-ID: A1-45771-212

Consisting of: stainless steel ball valve valves, tri-clamp couplings and fittings, pressure regulators/pressure gauges, pressure reducing valves, stainless steel hose couplings, gaskets and seals, flexible stainless steel hose, various process parts for brewery/CIP installations. Auction-ID: A1-46397-21

Including type Poly-PTX Flapwheel 105x50mm, Poly-PTX Mix wheel 115x100mm, Poly-PTX fleece Wheel 105x50mm,..., complete with some liquids Eisenblätter including oil and polyseal Auction-ID: A1-46604-110

Including FE Powertools, Metalworks, BDS, Somta, Promega, including various core drills, metal drills, holecutters,..., in various sizes and types, lying in 8 sorting trays Auction-ID: A1-46604-130

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-167

17 pcs Spanner set, extra long wrenches, high quality, 8-32mm, in case Auction-ID: A1-40418-146

Working volume 4000L; equipped with steel walkway 1000x9000 mm; tanks are connected to each other by a stainless steel profile; This is sawn through by our external partner. Auction-ID: A1-45771-4

automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-149

Including Magtron, Promega, Rotabroach, including various core drills, hole cutters, metal drills, Raptorcutters,.., in various sizes and types, lying in 4 sorting trays Auction-ID: A1-46604-133

Consisting of 2x welding station and 1x assembly station, nominal voltage 3x400 V, power 9.18 kW, control voltage 24 V, incl. conveyor technology and enclosure to interfaces Auction-ID: A7-46821-3

2x xtreme speaker, 2x Charge speaker, 1x Flip, 1x DJI OM4 smartphone stabalizer Auction-ID: A1-45771-81

10-cup filling machine; For various sizes of cans; approximately 4000 per hour; without infeed belt, with conveyor belt and blower Auction-ID: A1-45771-5

Category: Battery chargers and testing equipment set Manufacturer: Hoppecke / ACTM / MPS Model: 24V-100A / Gold-Plus / MP Slim Type: Industrial battery charger and battery tester assortment Technical Data: Battery Charger: Hoppecke 24V-100A Battery Testers: 2 pcs ACTM Gold-Plus intelligent battery testers Additional Charger: MPS Slim charger unit Jump Starter: Portable booster/starter device included Timer Device: Time-Precision T-P50 included Accessories: Accessories 1: Charging cables and clamps included Accessories 2: Power cables included Remarks: Sold as one lot only Remarks 2: Functionality not tested Remarks 3: Workbench not included Condition: Used Auction-ID: A7-45993-108

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...