ton hydraulic used for sale

Hydraulic Full Clamping Cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm

: 3050 mm : 06,5 mm : - : 0,5-2,5 ° : 1000 mm work height max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulic Testing Press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 pressure max: 200 kN stroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch) largest height: 400 mm table: 340 x 340 mm 380 V Dimensions: 1300 x 840 x 2050 mm

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm Price: per piece -Quantity: 2 available -Dimensions: 300/120/110 mm -Weight: 7 kg

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Refer to code 1174 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Quantity: 1 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Hydraulic filter -Type: HY13479 -Quantity: 10 available -Price: per piece -Weight: 0.5 kg/piece

sheet width: 3000 mm plate thickness: 6,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,50 t dimensions of the machine ca.: m Motorized back stop with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic filter -Type: RG 045/070/RE045G20B -Quantity: 3 available -Price: per piece -Weight: 0.5 kg/piece

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

pressure: 40 t stroke: 250 mm total power requirement: 6 kW weight of the machine ca.: 3 t distance between columns: 600/350mm mm table surface area: 860x620 mm ram surface: 860x620 mm table height: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

pressure: 300 t distance between columns: 1350/1000mm mm stroke: 500 mm weight of the machine ca.: 20 t table surface area: 1900x1600 mm ram surface: 1900x1600 mm table height: 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

pressure: 7 t throat: 180 mm stroke: 100 mm table surface area: 300x300 mm ram surface: Ø105 mm hole in the table: Ø60 mm table height: 1050 mm tool hole in ram: Ø30 mm total power requirement: kW dimensions of the machine ca.: BxTxH 1200x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Manufacturer: SPITZNAS Type 2E22V-FHP-Z Torque: 50000 Nm Speed: 0-0.15 rpm Shaft: approx.: Ø160 mm Overall dimensions: approx. 1500 x 1100 x 800 mm Discover the high-quality hydraulic gear motor 50000 Nm used B17806, a sophisticated hydrostatic gear motor that convinces in its performance and precision. This high-quality motor is produced by the renowned manufacturer SPITZNAS and promises optimal work results in industrial applications thanks to its outstanding technological advances. With an impressive torque of 50000 Nm and a variable speed of 0-0.15 rpm, this geared motor offers powerful performance for reliable changeovers and efficient process management. The robust shaft with a diameter of 160 mm is ideal for demanding applications in heavy industry and convinces with its durability and resistance. The hydraulic motor impresses with its well thought-out design, in wh ...

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Factory rebuilt BIPEL 1500kN press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations :- Model 1500kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Cylinder type Double acting Pressing force kN 1500 Pull back force at circuit pressure kN 60 Operating height mm Approx. 930 Stroke mm 457 Daylight between Tables mm 976 Heated Platens mm 593 Table size L-R mm 711 F-B  ...

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 1x pumps available -Price: per piece -Dimensions: 130/90/H120 mm -Weight: 3.4 kg/pc.

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

ZM Flattening Die

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm -Weight: 28.7 kg

Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg

Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic power unit -Manufacturer: Bieri, hydraulic reservoir, hydraulic tank for hydraulic power unit -Hydraulic tank: with filter and level indicator -Individual components: see photos -Dimensions: 340/245/H300 mm -Weight: 6.1 kg

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999