135,613 used machines on RESALE, but how to find them? Machine Search
Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Electric motor: 80 V with 2 hydraulic pumps -Power: 2.2 kW -Speed: 1480 rpm -Dimensions: 340/290/H590 mm -Weight: 45 kg
Key data: 30 t
Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: mm -Piston rod: Ø 35 mm -Stroke: 750 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 24 kg
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg
pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg
pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg
to move the heaviest loads Total thrust 400 to - 4 x 100 to Cylinder stroke approx. 1,000 mm Double-acting hollow piston cylinders Tie rods 9 x 6,000 mm, 1 x 5,000 mm Operating pressure up to 400 bar Tank capacity approx. 500 litres Operation via wired remote control Electrical values 400 V / 2 x 30 KW
pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg
Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg
hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg
hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg
Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -
Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston: Ø approx. 35 mm -Piston rod: Ø 20 mm -Stroke: 40 mm -Dimensions: 65/65/H380 mm -Weight: 3.75 kg
Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece
Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t distance between columns: 625 mm stroke: 150 mm table surface area: 580x450 mm ram surface: 580x340 mm hole in the table: Ø 150 mm table height: 850 mm tool hole in ram: Ø 45 mm column travel -side: 200x200 mm weight of the machine ca.: ca. 6,0 t dimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 16 mm -Stroke: 260 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 457/43/H38 mm -Weight: 2.45 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 12 mm -Stroke: 50 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 242/43/H38 mm -Weight: 1.37 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 38 mm -Piston rod: Ø 25 mm (M20 x 1.5 mm thread) -Stroke: 60 mm -Pressure: 70 bar -universally applicable: -Dimensions: 224/86/H53 mm -Weight: 2.5 kg
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t distance between columns: 0 mm stroke: 0 mm total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: 0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t distance between columns: 800 mm stroke: 100 mm dayligth: 450 mm table surface area: 750x750 mm weight of the machine ca.: 3 t dimensions of the machine ca.: 1500x1500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 275 mm stroke: 150 mm table surface area: 860x550 mm ram surface: 600x400 mm table height: 810 mm tool hole in ram: Ø 50 mm dayligth: max. 475 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 2000x2500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1500 mm plate thickness: 3 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 2000x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg
pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 70 t throat: 325 mm stroke: 800 mm die cushion capacity: 35 t drawing stroke: 280 mm ejector stroke: 240 mm rapid traverse - down: 650 mm/sec working feed: 58-199 mm/sec dayligth: 1050 mm table surface area: 900x580 mm ram surface: 460x460 mm total power requirement: 45 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: BxTxH 1000x2200x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg
Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg
Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg
pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece
pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
