ton hydraulic used for sale

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

pressure: 30 t stroke: 170 mm column daylight: 600 mm Frame Width: 200 mm distance spindle /table: max. 700 mm weight of the machine ca.: 200 kg Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination

pressure: 180 t stroke: 400 mm column daylight: 1500 mm Frame Width: 550 mm distance spindle /table: max. 1000 mm total power requirement: 7,5 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 2300x1200x2850 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

Hydraulic filter changer: 200 mm. With pressure transducer.

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Unit comes from: grinding machine WERKO SKSt 200 -Motor: VEM type KMR 56 G 4 -Pump: 220/380 V/1360 rpm/0.18 kW -Dimensions: 470/570/H445 mm -Weight: 88 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 30 mm - Piston rod: Ø 30 mm -Mounting holes: Ø25 x 70 mm / Ø13 x 10/16/10 mm -Cylinder: outside Ø 90 mm -Number: 2x cylinders available -Price per piece -Dimensions: 390/140 / H100 mm -Weight: 9.7 kg

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 620 mm -Universally applicable: -Quantity: 1 available -Price: per piece -Dimensions: 905/140/H160 mm -Weight: 45 kg

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Gearbox type: SK 20F-100 L/4 -Speed: 120 rpm -Drive motor: Nord -Hydraulic pump: unknown -Dimensions: 900/320/H300 mm -Weight: 119 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: Schorch 1.5 kW 1405 rpm -Sale: in the current condition as seen -Dimensions: 490/340/H585 mm -Weight: 46 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 100 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: 415/120/H110 mm -Weight: 14 kg

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.22 kW 1350 rpm -Protection class: -Pump output: adjustable -Number: 1x pumps available -Price: per piece -Dimensions: 390/170/H185 mm -Weight: 15 kg

Hydraulic Shear COMESSA CP 316 Capacity: 3000 x 16 mm Back gear gauge travel: 1000 mm Throat depth: 500 mm Motor power: 35 CV Adjustable blades 4 cutting blade Voltage: 380 V Dimensions (L x W x H): 3500 x 2200 x 2400 mm Weight: 16,5 T

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 18 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 130/248 mm -Weight: 14.7 kg/piece

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 16 mm -Price: per piece -Number: 1x available -Dimensions: 160/160/H179 mm -Weight: 7.7 kg

Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg

Hydraulic pump, oil pump, gear pump -Shaft mount: Ø 14 mm -Quantity: 1 piece available -Dimensions: Ø 115/190 mm -Weight: 3.7kg

Hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 15 mm -Flange: Ø 50 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 125/230 mm -Weight: 11.7 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting, stroke 100 mm -Piston rod: Ø 56 mm -Cylinder: outside Ø 95 mm -Dimensions: Ø 200 x 370 mm -Weight: 23 kg

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 10 t, 300 mm, 300 mm

more info on request

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 850 mm -Type: C-M1144 -Piston rod: Ø 18 mm -Cylinder: outside Ø 35 mm -Number: 2x cylinders available -Price per piece -Dimensions: 984/70 / H50 mm -Weight: 6.5 kg / pc.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder, stroke 85 mm -Piston rod: approx. Ø 50 mm -Cylinder: outside Ø 80/70 mm -Socket: Ø 36 mm -Dimensions: 1015/120 / H100 mm -Weight: 17 kg

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Key data: 3000 mm, 8 mm

Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

Hydraulic vice, machine vice, hydraulic vice, drilling machine vice -Jaw width: 125 x 45 mm -Clamping depth: 225 mm -Machine vice: rotatable -Dimensions: 430/300/H140 mm -Weight: 44 kg