to used for sale

Toprol / Rollway / ORS - Batch of various industrial bearings 121KG

FAG, Ringfeder, SKF, Tollok - Batch of industrial bearings & clamping elements

NTN, SKF, NSK, Torrington - Batch of industrial bearings and bearing blocks

Centre Distance 1.000 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross slide Ø 200 mm Spindle bore Ø 54 mm R.P.M. 22.4 – 2,000 (24x) kW 5.5 Volt 380 Cycles 50

Consisting of: various HSK A63 holders, collet holders, extensions and milling holders, including Haimer, Seco, EPB

Key data: 600 mm, 400 mm, 310 mm

A Mitsubishi MV2400R is being sold Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V axis: +/- 75 mm Type: 4-sided frame table hardened with automatic adjustment Vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece sizes: max. 1050 x 820 x 305 mm Workpiece weights: max. 1500 kg Wire ̄: 0.1 to 0.3 mm for wire coil holder 10 kg Control: MITSUBISHI M800 with 19" Full-Touch Monitor (incl. hand pilot with configurable LCD monitor) Closed control loops min. axis resolution 0.05 μm Generator: Fine finishing generator H-FS AE II Digital Generator Equipment: Tubular drives with linear scales (X/Y/U/V) Hand-held pilot with configurable LCD monitor 20-kilo wire station Angle Master Advance II Set Wear parts box Ergolux Lamp Corehold function Job Planner Filter Pump Pressure Sensor Operating data output Free software update if needed  ...

Complete with ESAB welding helmet and some accessories.

Consisting of: various ISO/HSK A63 holders, collet holders, extensions and milling holders, including Haimer, Seco, EPB, (G2.5 balanced).

500W, Various drills in box 5mm - 7.5mm

Unused

HM and HSS drills, milling cutters, deburring inserts, taps, disc milling cutters, Morse tapers

HSK recording; with accessories

Consisting of: various BT40 / ISO40 holders, including Haimer, Seco, EPB.

Content:

Lot consisting of drills, tappers and all kinds of accessories. See photos.

batch of clamping material consisting of: (3x) machine clamps 410x130x90mm, T-slot clamps, adjustment blocks and various clamping components for milling machines.

Unused

Compressed air connection, including sand,

Including various bell drills

Unused

Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mm height: 1950 mm depth: 600 mm width: 1050 mm Roller shutter defective The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 tonnes of stacked galvanized steel floor panels used for industrial construction flooring. The panels are neatly arranged on a wooden pallet, ready for installation or transport. These elements are typically used as load-bearing components in mezzanines, factory floors, or elevated platforms, providing strong and durable support for heavy industrial applications. In the background, several large transport crates can be seen inside a warehouse setting. Per panel: LONG- 3M HIGHT- 75MM WIDTH- 0,20M WEIGHT - 18,4KG

4 tonnes of stacked galvanized steel floor panels used for industrial construction flooring. The panels are neatly arranged on a wooden pallet, ready for installation or transport. These elements are typically used as load-bearing components in mezzanines, factory floors, or elevated platforms, providing strong and durable support for heavy industrial applications. In the background, several large transport crates can be seen inside a warehouse setting. Per panel: LONG- 3M HIGHT- 75MM WIDTH- 0,20M WEIGHT - 18,4KG

Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ;

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

This 4-axis SCHÜCO Profilbearbeitungscenter was manufactured in 2001. It features a travel range of 6,300 x 600 x 405 mm, continuous 180° A-axis rotation, and a high-speed capability of 24,000 rpm. Equipped with an HSK-40E tool holder and an 8+1 tool magazine, it ensures efficient machining. Consider the opportunity to buy this SCHÜCO Profilbearbeitungscenter. Contact us for more information about this machine.

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 525 Nominal / outside width in mm: 690 Roll width in mm: 625 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,25 Überschieber Con ...

Control Philips CNC 432 Travels X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 min-1 20-cavity tool magazine SK 40 4th Lehmann axis

Tool trolleys in various sizes and designs from Gedore & Orion

1 Loos steam boiler, 12 bar, 10 tons Type AW1-1 No. 53658/1 Output 10 tons of steam at 12 bar Up to 235 °C, 385 kW Year of manufacture 1991 With White Head Burner Machine with EL heating oil and gas firing Type RGL 70/1 A, Category J Fabr. Item no. 362680 Year of manufacture 1991

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

We have numerous Multifix steel holders, size C in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.

We have several Multifix steel holders, size D1D in various designs in stock. Partly also with drills and turning steels. Please inquire about exact dates and requests.

gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.