to used for sale

Compressed air toggle press BURGER type D04Fabr. No. 4497 Year of construction approx. 1972Compressive force max. 6 ton. Projection 150 mmPlunger stroke 39 mmTable size 340 x 270 mmThrough-hole opening 46 mmInstallation height max. 160 mmTool holder 25 mmPlunger plate 90 mmPneumatic operating pressure 5 barMains connection 220 V 50 Hz- Pressure regulator for press force adjustment- Lifting height adjustment 7, 21, 40 mm- Electric foot switch- Table height adjustmentSpace requirement L x W x H 700 x 500 x 1300 mmWeight

Consisting of: tension bolts SPB40, Zero point clamping system.

All clamping devices and fixtures and accessories for lathes

CONVENTIONAL LATHE Inv. No. 13.038C1 Make TOS Model SUI 50 Serialnumber 150200900558 Centre Distance 2000 mm Max. Swing over Bed Ø 500 mm Max. Swing over Cross Slide Ø 320 mm Max. Swing in gap Ø 560 mm R.P.M. 14 – 2240 kW 7 ,5 Volts 400 Cycles 50 Including : DRO Coolant Emergency stop Safety protection over chuck

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Included: Lattice box

Tool holder combination holder for internal and external cooling VDI 40 Ø 25120/Ø4090/Ø3670 Cantilever length (LPR) 145.00 mm Function Length (LF) 120.00 mm Functional width (WF) 42.50 mm Pick-up diameter, min. (DCONN) 25.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025lctxdi-kombih-f-i nner-u-ausauskuehlung-bore-25-mm-long-ausfäehrung-differential-verste llung-differentialialverstellung-/103300 Pcs:7/74/4

Tool holder combination holder for internal and external cooling VDI 25 Ø 25 mm/ Ø32mm Manufacturer: EWS Country of origin: Germany Shaft size VDI25 Cantilever length (LPR) 95.00 mm Functional length (LF) 70.00 mm Functional width (WF) 30.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ews-tools.de/de-DE/product/ews-17-2525-4mft-kombih-f-innen-u-aussenkue hlung-bohrungs-25-4-mm-1-/66355 Condition: New

Tool holder combination holder for internal and external cooling VDI 50 Ø 4085125 Cantilever length (LPR) 125.00 mm Functional length (LF) 85.00 mm Functional width (WF) 42.50 mm Mounting diameter, min. (DCONN) 40.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 40.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Pieces:4

FAG, SKF, Torrington - Batch of various bearings 265KG

Tool holder combination holder for internal and external cooling VDI 60 Ø 50200235 17.6050.8S670 Cantilever length (LPR) 235.00 mm Function Length (LF) 200.00 mm Functional width (WF) 62.50 mm Mounting diameter, min. (DCONN) 50.80 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI60 Interface size Ø 2" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-6050-8s670-kombih-f-i nnen-u-ausauskuehlung-durchmesser-50-8-mm-2-/68694 Pieces:4

Siemens Simatic 6AV7872-0BC12-1AC0 Touch Panel PC Touch 15" 677B Series P6 6AV7872-0BC12-1AC0 Touch 15" Panel PC 677B Verse. 03 More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder VDI 30 longitudinal holder Interface size square 20x20 4.3020DSS left Cantilever length (LPR) 60.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 22.00 mm Clamping length, max. (LSCX) 60.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c2-links-/69246 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 2.3020DSS right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 23.20 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-2-3020dss-langengsaufnah me-stahlhoehe-20-din-69-880-form-c3-right-overhead-/69572 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 right 1.3020DSS Cantilever length (LPR) 75.00 mm Functional length (LF) 0.00 mm Operating Height (HF) 19.05 mm Functional width (WF) 60.00 mm Clamping length, max. (LSCX) 75.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-1-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c3-rechts-ueberkopf-/68760 Price without VAT

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Boring rod holder with external cooling radial Ø 1675 / Ø1875 / Ø2575 / Ø3275 Cantilever Length (LPR) 168.00 mm Function Length (LF) 143.00 mm Functional width (WF) 60.00 mm Mounting diameter, min. (DCONN) 16/18/25/32 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 16/18/25/32 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-17-5016x75-kombih-f-innen-u-auss enkuehlung-bohrungs-16-mm-x-75mm-/66136 Condition: New Pcs:3/3/7/1

Tool holder boring rod holder VDI 40 36×95/1676/2596/2895/2295 Manufacturer: EWS Type: VDI 40 Bar diameter: 36/16/25/28/22 Bet Height: 95/76/96/95 Price without VAT Country of origin: Germany Condition: new Pieces: 2/8/7/1/1

Tool holder combination holder for internal and external cooling right/left VDI 40 Ø 25 Cantilever length (LPR) 180.00 mm Functional Length (LF) 150.00 mm Functional width (WF) 10.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025-4mp620-kombih-f- innen-u-ausauskuehlung-bohrungs-25-4-mm-1-/22571 Pieces:5Right/5Left

Tool holder longitudinal holder VDI40 steel height 25 Links Functional length (LF) 0.00 mm Operating Height (HF) 25.40 mm Functional width (WF) 25.50 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI40 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-4025-4dss-laengsaufnahme-stahl hoehe-25-4-1-/69384 Condition: New Pieces:12

Consisting of: various HSK A63 holders, (5x) Haimer, (2x) schluessler.

Tool holder longitudinal holder VDI50 steel height 32 left Functional length (LF) 0.00 mm Functional height (HF) 32 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Condition: New Pieces:5

Length approx. 3.2 meters; 13 mm lip

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

Tool cabinet without contents with castors

included: lattice box.

Wooden box with various machine tools and accessories, including cutters, gears, clamping equipment and various loose parts.

weight: 100 kg : 2 Stück height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder for two boring rod holders VDI 40 19.4025LR25MS Manufacturer: EWS Country of origin: Germany Body Diameter 1 (BD1) 55.00 mm Cantilever length (LPR) 115.00 mm Functional length (LF) 14.00 mm Pick-up diameter, min. (DCONN) 25.00 mm Clamping length, max. (LSCX) 101.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-19-4025lr25ms-werkzeugaufnahme-b ohrungs-25-mm-050stat-10-lr25ms-/64727 Condition: New

Prism support solid steel Metrics: Width: 137 cm Depth: 40 cm Height: 30 / 50 cm - Scope of application: D750-D2250 - Steel on steel: 100 tons - Steel on intermediate layer: 200 tons - Net weight: 1100 KG More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder longitudinal holder VDI 50 25 4.5025L1=120ISC Manufacturer: EWS Country of origin: Germany Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 26.00 mm Clamping length, max. (LSCX) 110.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-5025l1-120isc-laengsaufnahme-s tahlhoehe-25-/69468  Condition: New

Tool holder square longitudinal holder left, overhead VDI 50 steel height 25 4.5025L1=120ISC2 Manufacturer: EWS Country of origin: Germany Cantilever length (LPR) 110.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 26.00 mm Clamping length, max. (LSCX) 110.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-4-5025l1-120isc2-langeng saufnahme-stahlhöhe-25-/69471 Pieces:3

Approx. 170 tool holders, some with tools

A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.

• For applying a security label to a top-load folding box. • Output max. 300 folding boxes/min. • Folding box dimensions width in infeed direction max. 120 mm, height max. 95 mm • Separating station • Side conveyor belts • Top conveyor • Label dispenser PAGOmat 6/2 A 75/100, height- and cross-adjustable • Label roll outer diam. max. 400 mm, core diam. 76 mm • Label width max. 40 mm, label length max. 25 mm • Inkjet printer Wolke (Videojet) m600 advanced with 1 print head • Camera control PCE with camera Mini-Smart, retrofitted in 2010 • Badpackage ejection into container with air nozzle and ejection countercheck • Various controls with light barriers • Machine control with separate control cabinet, PLC Siemens S7-300, HMI Siemens Simatic Panel • Camera control with separate shadow cabinet, PLC S7-200 and IPC (Windows XP Professional), keyboard, HMI PCE panel ...

Demonstration device

Without content

SKF, FAG, Torrington - Batch of industrial bearings and seals

Batch of clamping material for machine bench, consisting of: clamping blocks, clamping jaws, T-slot clamps, sets and bolts in various sizes. Includes: (1x) shelf trolley.