to used for sale

Description: serial number: 174311 grinding length: 320 mm center height: 60 mm max. grinding wheel speed: 1295 rpm total power requirement: 24 kW machine is in good technical condition, by prior agreement the possibility of testing. grinding wheel turning speeds: 1,295 rpm, weight approx.: 4,600 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,000 x 1,500 mm

grinding diameter:630 mm grinding length:3000 mm centre height:315 mm total power requirement:35 KVA weight of the machine ca.:13,3 t

workpiece diameter: mm workpiece length: mm clamping length: mm

Polishing bench grinder, polishing bench, double polishing bench, polishing machine -Manufacturer: Multi-tool Grit, polishing machine double polishing stand with suction and mobile base frame -Type: GA 600 -Polishing discs: Ø 200 mm / max. Ø260mm -Motor power: kW -Speed: rpm -Dimensions: 1050/650/H1200 mm -Weight: 171 kg

Description: SPECIFICATIONS Character: Tos Type: SU 50 A Distance between centers: 1250 mm Center height: 250 mm Turning diameter above the bed: ø500 mm Turning diameter above the base: ø270 mm Door outlet: ø55 mm 3-jaw chuck Approx. Onsite Dimension. (l x w x h): 3,300 x 1,300 x 1,500 mm, weight approx.: 3,000 kg

Description: 'SPECIFICATIONS Character: Tos Type: SUI 80 Distance between centers: 2,000 mm Height between centers: 400 mm Turning diameter above the bed: ø800 mm Turning diameter above the base: ø540 mm Door outlet: ø80 mm 4-Jaw chuck' weight approx.: 5,440 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 1,800 mm

CNC cut-to-length saws, manufacturer: TORWEGGE, type: AS 700, year of manufacture: 1999, serial no.: 80500002, feed carriage L approx. 6,000 mm, gripping pliers, PLC control with operator panel SIEMENS Simatic OP 27, labelling station SRD, transfer belt conveyor belt, L approx. 5,500 mm, (hammer bid is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be compared after the auction closes)

CNC double-end tenoner, manufacturer: TORWEGGE, type: H 632, year of manufacture: 1999, serial no.: 80110039, 2 milling/grooving units, control with operator panel SIEMENS Simatic OP 27, transfer belt conveyor belt, L approx. 6,000 mm, (hammer bid is subject to reservation, total bids 334-350 or collective bid of item 333 will be compared after the auction ends)

bar capacity: 1 - 16 mm Turning speeds mainspindle: 12.000 U/min control: FANUC Number of axles: 10 St. Dimensions (L x W x H): 2.000 x 1.260 x 1.950 mm Lathe - swiss lathe | TORNOS-BECHLER - DECO-13 Main equipment: 10 axes, 3(6) spindles: - 1 movable headstock: Z1, S1 - 2 independent linear tool systems on the vertical: X1/Y1 (S6)-X2/Y2, S2 - 1 front attachment 4 spindles: X3/Z3 (S3) - 1 independent pick-off spindle: Y4 / Z4, S4 - 1 independent tool system in backside machining: X4 (S5) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DECO13 | DECO 13 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Round bars: 8-100 mm, Hexagonal bars: 7-86 mm, Square bars: 7-70 mm, Bar length: 200-1,600 mm, With control panel, Machine condition: Very good – only 50 operating hours The additional costs are dismantling and loading costs.

-Table: approx. 900 x 250 mm; -Attention! Without a vice.

Machine includes sump, cooling pump and documentation of the machine, control, electrical diagrams, etc. The battery has been replaced, but there are probably still a number of parameters missing that need to be set.

Sony 3-axis digital, 23kVA. Including platform with 2 pallet stations, dimensions platform wxdxh approximately 455x220x155cm. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated. Pick up Thursday 2 May 2024 from 09.00-15.00 hrs, start dismantling 09.00 hrs. If necessary, dismantling and preparing transport can start on Wednesday 1 May.

Equipped with Mitutoyo digital readout. Includes 5 quick-change chisel holders, clamping jaws, center, fixed goggles.

Spindle motor: 7.5 kW Dismantling + loading cost by professional dismantling team: 750 euros

Lathe Metal Lathe, Model: Conventional Manufacturer: TOS Type: SN 500s/2000 Digital readout Center distance: 2000mm Center-height: 255mm Turning diameter: 500mm Swivel diameter gap bed: 700mm Diameter: 77mm Spindle speed: 12.5-2000 rpm Machine weight: 2010kg Machine dimensions: 3500x1100x1700mm

Approx. Onsite Dimension. (l x w x h): 700 x 400 x 800 mm, weight approx.: 40 kg

Approx. Onsite Dimension. (l x w x h): 700 x 400 x 700 mm, weight approx.: 50 kg

Approx. Onsite Dimension. (l x w x h): 800 x 250 x 700 mm, weight approx.: 40 kg

Description: Oil quantity 6 l Approx. Onsite Dimension. (l x w x h): 800 x 300 x 700 mm, weight approx.: 40 kg

equipped with rollers ejection conveyor with pneumatic ejector, passage height 170 mm, digital control, control box, stainless steel frame, pallet box included

Mobile

Tube diameter: 120 mm, Controls included.

Description: Belt cutter (belt width 100 mm) Workbench with 6 pull-outs, ,without contents , weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 950 x 620 x 1,000 mm

Description: Suitcase on wheels, with tools Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 5 kg

Description: Suitcase on wheels, with tools Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 5 kg

Description: Suitcase on wheels, with tools Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 5 kg

Description: Suitcase on wheels, with tools Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 5 kg

Description: Suitcase on wheels, with tools Approx. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 5 kg

Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...

Key data: 130 mm, 3500 mm, 2500 mm

1x used CNC table boring mill manufacturer: TOS VANSDORF TYPE: WHQ 13.8 CNC Year of construction: 2000 Control: TNC 430 Heidenhain Tool changer: yes 40 places Chip conveyor: yes Spindle hours : 30000h Controlled axes: 5 x-axis:3500mm Y-axis:2500mm Z-axis:1250mm W-axis: 800mm B-axis:360° Table clamping surface : 1800x2200mm Load capacity table: 12000kg Spindle mount: 130mm ISO 50 Spindle rotation: 2500rpm

Description: Overhauled Cylindrical  ,Grinding Machine with Siemens control. Grinding length: 630 ,mm Grinding dia.:  ,250 ,mm Other technical details: workpiece spindle swivable +/- 90 ° spindle speeds 25 - 500 U/min workpiece spindle - bore MK 4 grinding head swivellable +/- 45 / 15 ° grinding head adjustment 330 mm feed range - grinding head/stepless 0,001 -315 mm/U grinding wheel size D = 400 x 40 x 127 mm grinding wheel size min. D = 250 mm grinding spindle speed 2140 / 2640 U/min peripheral speed 45 m/sec table travel 1508 mm table speed -stepless- 0,005 - 5 m/min rapid traverse of table 6,5 m/min swival range +/- + 6°50' / - 3°50' Grad max. workpiece weight between centres 250 kg spindle drive 5 bei 60% kW voltage 400 V / 50 Hz power capacity 5,5 kW total power requirement 12 KVA weight of the machine ca. 3,1 t NOTE: The technical info ...

Description: Frame number 2 FGH 10-12647 Approx. Onsite Dimension. (l x w x h): 3,200 x 900 x 2,000 mm, weight approx.: 3,000 kg

Description: NEW VALUE Bi-metal saw blades / standard / solid material / i-tools / 13.13.1004/BZ430 / dimensions: 2360x20x0.9 mm / toothing: 5/8 / quantity: 5 PCS weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 450 x 360 x 330 mm

Description: NEW VALUE Bi-metal saw blades / standard / solid material / i-tools / 13.13.1013/BZ430 / dimensions: 2450x20x0.9 mm / toothing: 4/6 K-O / quantity: 8 PCS weight approx.: 8 kg, Approx. Onsite Dimension. (l x w x h): 450 x 360 x 330 mm

Description: 4-axis Inner coolant supply Operating hours 65,289 Spindle overhaul 2022 Tool holder HSK63 Hinged belt conveyor KNOLL 600 K-1 Belt filter system with high-pressure system  ,KNOLL year 2012, 70bar ( without automatic filling system for cooling water ) Tool changer LERIC FTS 360 year 2012, 360 places Pallet changer KUPA FPA 630 with 12 pallet spaces , Incl. approx. 260 tool holders consisting of various shrink-fit tool holders (without tool), supported by collets and Weldon holders  , z-motion: 600 mm, x-motion: 600 mm, y-motion: 600 mm, control: Fanuc 31i, numbers of pallets: 12, taper: HSK63, toolchanger positions: 370, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 10,000 x 4,000 mm

Description: 2-machines connected with 1 pallet station 4-axis IKZ X-600mm Y-600 Z-600 B-axis Spindle revision 2020 for one machine WT storage 360 each, total 720 WZ Tool holder HSK63 2 KNOLL 600 K-1 hinged belt conveyors 2 belt filter systems with KNOLL high-pressure system, 70 bar (without automatic filling system for cooling water) 2 LERIC tool changers with 360 places each 1 pallet changer with 2 PalTec FPA450 input stations with 42 pallet spaces connected to both machines, without clamping towers incl. approx. 260 tool holders per machine consisting of various shrink-fit tool holders (without tool), supplemented by collets and Weldon holders  , z-motion: 600 mm, max. workpiece weight between centers: 400 kg, x-motion: 600 mm, y-motion: 600 mm, control: Fanuc 31i-Model A, pallet table size: 450x450 mm, numbers of pallets: 42, taper: HSK63, power capacity - spindle: 18.5/22 kW, t ...

Description: Charger included loading capacity: 1,500 to, lifting height: 4,320 mm, length of forks: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 2,580 x 990 x 2,140 mm, weight approx.: 3,000 kg, serial number: FSW-E811

Description: Work table dimensions: 1400 x 360 mm Maximum speed of the vertical spindle: 1400 1/min Travel of the X-axis: 1000 mm Travel of the Y-axis: 300 mm Travel of the Z-axis: 420 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,900 x 2,300 mm, weight approx.: 2,760 kg

This TORNOS MultiSwiss 8x26 Lathe was manufactured in the year 2018. It is equipped with a Kraft & Bauer fire extinguishing system and a hinged belt conveyor. It is included all existing machining units and accessories. The machine is under power and immediately available.

This TORNOS Swiss DT 13 Swiss Type Turning was manufactured in the year 2016 and has 15476 production hours. It is equipped with a Fanuc 31i-B control unit. Disposes of a Kraeft & Bauer fire extinguishing system in all fully CNC axes. It is included with all existing machining units and accessories. The machine is under power and immediately available.

This Tornos-Bechler DECO 2000/13 Swiss Type Turning from Switzerland was manufactured in 2000, is operated through a Fanuc PNC-DECO control unit. This machine incorporates a spindle speed up to 10000 rpm. It includes a loader for bars of 4 mm up to 26 mm diameter. It presents perfect conditions.

This TONGTAI VP-8 Vertical Machining Centre was manufactured in 2016 in Taiwan. It has a table size of 900 x 510 mm with a max. table load of 500 kg and is equipped with a FANUC control. This 3-axis machining centre ( X/Y/Z axis travel: 820/510/535 mm) has an excellent condition for a used machine and can be visited at any time.

This TOS Optima Horizontal Machining center was manufactured in the year 2005 in Czech Republic and has 83171 production hours, of which 36511 are spindle hours. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.