We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,049 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets
used
x-travel: 400 mm tool taper: SK 40 digital: . weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC controller: FANUC 15i-M Axes; X-axis travel mm: 9.000 Y-axis travel mm: 3.900 Z-axis travel mm: 900 W-axis travel mm: 1.600 (distance between columns 3.100 mm) Distance spindle nose - table surface mm: 2.440 Feed rates m/min: 6 (X,Y,Z) 3 (W) Rapid traverse m/min: 20/9 (X,Y) 10(Z) 6(W) Worktable; Number of pallets: 2 (table automatic changer) Table dimensions mm: 2.700x8.000 Max. workpiece weight kg: 20.000 Spindle; Spindle speed rpm: 5-3.000 (2 ranges) Spindle drive power kW: 30(50% ED)/22 Spindle torque Nm: 2.170 Tool system; Tool holder: MAS BT50 Tool magazine slots: 180 Equipment; Chip conveyor Signal lamp High pressure pump Tool breakage probe Preapared for RENISHAW sonde RENISHAW Measuring probe Rated power kVA: 150 AAC (Automatic Attachement Changer): Capacity = 5 Attachements and their cases: 1) Snout 190 2) Small Angle head 5 Faces Cutter Head ...
used
TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...
used
Capacity : 10 Kg PLC Control Gas system It has been used only by SCA trainers Machine is in very good working condition
used
Spindle diameter: 120 mm Cross X: 3500 mm Vertical Y: 2500 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60 Number of pallets: 1 CNC Brand: Heidenhain X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate ...
used
band saw, semi-automatic saw, metal saw, metal band saw, frame metal saw Toptech / Optimum GB 4240, used machine Manufacturer: Toptech / Optimum Type: GB 4240 Year of construction/month: 2013/06 Dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Strap size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vice - Adjustable feed rate Material size: 400 x 400 mm
used
We offer a CO2 extinguishing system as a complete system. This is the FAST 2000 system from tyco / Total Walther with 7 system bottles.
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Number: 3x bezels available -Price: per piece -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: gray cast iron -Hole spacing: 135 mm -Tip height: 145 mm -Drawing with the photos -Dimensions: 370/280/H90 mm -Weight: 10 kg
used
grinding diameter: 500 mm grinding length: 2900 mm centre height: 250 mm Control: Siemens Sinumerik 840D centre distance: 3000 mm stroke of the table: max. 3200 mm table feed: 0,001 - 4000 mm/min rapid traverse of table: 9 m/min table swivelling +/-: +4/-2 Grad grinding wheel size: 500x100x203 mm peripheral speed: 18 - 36 m/sec spindle speeds: 6 - 900 U/min grinding head swivelling: 90 Grad tailstock quill taper MT: 5 tailstock quill stroke: 80 mm grinding spindle drive: 9,5 kW working spindle drive: 0,1 - 3,1 kW hydraulic motor: 2,2 kW max. workpiece weight between centers: 500 kg workpiece weight in steadies max.: 840 kg total power requirement: 58 kVA weight of the machine ca.: 14,1 t dimensions of the machine ca.: 8,9 x 3,42 x 1,94 m CNC control SIEMENS SINUMERIK 840D with operating panel OP 10 and color flat screen TFT 10,4 with machine control panel MPC 19 remote control panel ...
used
Round Dividing Table, Rotary Table, Circular Dividing Table TOS SM500 Ø 500 mm 360° Division used, tested ! Dimensions: 700 x 700 x 200 mm
used
Hydraulic pump TOS RAKOVNIK GAR1-020-41PS-1K Nominal pressure: 16 MPa ( 160 bar ) Nominal displacement volume: 20 cm3 rated speed: 1500 rpm shaft: Ø 22 mm shaft length: 40 mm groove width: 6 mm flange: Ø 110 / 144 x 150 mm bolt circle diameter: Ø 148 mm hole diameter: Ø 13 mm control valve: VTK 20-6-350 New ! Dimensions: 390 x 275 x 150 mm
used
turning diameter over bed: 500 mm turning diameter over slide rest: 320 mm turning length: 1000 mm centre height: 250 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 14 - 2240 U/min spindle nose: DIN 55027 Gr. 6 feeds - longitudinal: 0,023 - 4,8 mm/U feeds - cross: 0,011 - 2,4 mm/U face slide travel: 300 mm upper slide travel: 140 mm thread - mm pitch: 0,25 - 60 mm thread - inch: 120 - 1/2 Gg/ thread - module: 0,125 - 15 mm tailstock quill diameter: 80 mm tailstock quill stroke: 180 mm tailstock taper MT: 5 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 2,42 x 1,23 x 1,93 mm Accessories: 3-jaw chuck 250 mmø, MULTIFIX-toolpost with various inserts, drill chuck, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Dividing head with 3 jaw chuck and centering point TOS DU-250 AS ( DU-250AS ) Ø 125 IU 125 M 1- 1 max 4500 rpm center height 135 mm used, tested ! Dimensions 600 x 400 x 320 mm
used
centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MAX DIAM 500, MAX MODUL 8 , PLC , DRO
used
Rated capacity: 2000 Watt work piece lenght: 1075 nm Temperature range: 15 - 40 °C dimensions: 550 x 1100 x 1200 mm total wight: 200 kg Mobile laser welder with PenWelder hand-held PenWelder: - pulsed laser operation - average laser power up to max 500 W - Pulse duration 1 to 200 ms depending on application - peak pulse power 1000, 1500 or 2000 W - Siemens control - Integrated protective gas supply - Exchangeable -, adaptable process module (contact tips) - Pilot laser from laser source - Laser parameters via control panel Laser light cable LLK-A / BF 10: - Diameter(µ): 300 / 400 / 600 - Length(m): 4 / 6 / 10 / 20 Unit little used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer : Turbo tools ltd Model: NMD888 Type : piston dosing machine Mode : Automatic / semi-automatic (shot by shot) Operation : pneumatic Foot pedal action Adjustable dosing pump Feeding hopper Stainless steel 2 sets of filling heads available
used
VERSION 10 PNC axes - Control: FANUC PNC DECO - Rod passage 20 mm - movable headstock Z1 - Speed 10,000 1/min - 2x cross slide with 2x5 tool holders - 10 pre-adjustable tool holders - 4 front units - Counter spindle - Backside processing (4x end, 3x landscape) - Workpiece conveyor - Spaenefoerderer - Tool presetting device - Fire extinguishing system - Central lubrication unit - Oil mist extraction, filter mist - Drill quills, base holder and steel holder - various accessories (see photos) - Rod loading magazine Robobar
used
turning diameter over bed: 20 mm spindle passage: 20 mm turning length: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Including chipconveyor Swing over bed: 630 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Dia of spindle bore: 92 mm Power on the spindle: 17 kW Number of speeds: 2 > 3000 rpm Command: Siemens Sinumerik 810D Total power needed: 52 kVa Length: 5500 mm Width: 2200 mm Height: 2100 mm Weight: 6,6 ton Toolchanger: yes Number of tools: 12 positions
used
Drilling capacity: 30 mm Throat: 30 mm Spindle taper: 30 CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 5 Axis CNC Horizontal borer Spindle Hours 18.300 Optional HU 50 Universal milling head ( rotation 1 direction C-Axis) Hydraulic tool clamping External coolant system X - Travel: 1250mm Y - Travel: 900mm Z - Travel: 630mm W - Travel: 1000mm Table Length: 1120mm Table Width: 1000mm Table load: 3000 Speeds / ranges: 2500Rpm Power: 30kW Spind ...
used
Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.
used
Control Fanuc PNC Deco Bar passage 26 mm (32 mm) Max. turning length (max. workpiece length in one clamp) 240 mm Spindle speed range of the main and counter spindle 0 - 8,000 rpm Max. drive power 7.5 kW Max. number of tools on the guide bush 10 Max. number of tools in combination attachment 4 Max. number of tools in counter operation 7 Max. number of axes: 10 (12/C-axis) Accessories: Chip conveyor, loading magazine FMB Robobar SSF-532
used
Key data: 130 mm, 4000 mm, 2500 mm
TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER
used
Key data: 130 mm, 3000 mm, 2000 mm
Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO
used
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm spindle taper ISO: 40 spindle turning speed range: 50 - 2500 U/min table-size: 600 x 250 mm table load: 75 kg power capacity: 1,5 kW quill stroke: 80 mm voltage: 400 V feed: 8 - 400 mm/min total power requirement: 4 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: 1,70x1,30x1,20 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
filtration surface (sqm): 20 discharge of vessel: automatic discharge operating pressure (bar): 12 electrical power supply kW: 27 weight [kg.]: 1.5 volume of vessel (ltr): 1040 More then 300 machines new and second hand on our seema .de
used
pressure: 14 t throat max.: 220 mm stroke max.: 150 mm table surface area: 450 x 430 mm power stroke: 22 mm air pressure: 10 bar weight of the machine ca.: kg Overall size: 950 x 1050 x 2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 30 t throat max.: 250 mm stroke max.: 200 mm dayligth: 475 mm table surface area: 550 x 500 mm weight of the machine ca.: 2050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 30 t throat max.: 250 mm stroke max.: 200 mm dayligth: 475 mm table surface area: 550 x 500 mm weight of the machine ca.: 2050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Edging saw – single-blade saw Make Torwegge Type H321 Cutting width 164 mm Chain width 160 mm Main motor approx. 11 kW Cutting height 90 mm Weight approx. 1400 kg
used
pressure: 14 t throat max.: 220 mm stroke max.: 150 mm table surface area: 450 x 430 mm power stroke: 22 mm air pressure: 10 bar weight of the machine ca.: kg Overall size: 950 x 1050 x 2450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams
used
Mechanical Transfer Press ZANI 300 ton with Feeder Line composed of Rewinder + Feeder + Unwinder Fixed stroke: 96.5 mm Height of the ram from the table: 600 mm Print speed in automatic mode: 20 - 60 strokes/min Table dimensions: 1500 x 600 mm Ram dimensions: 1500 x 600 mm
used
Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50
used
Key data: 1600 mm, 460 mm, 16
3 x heads , change gears
used
Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition
used
Ref. -No.: 10320 Manufacturer: TOS Type of control: Digitalanzeige - Mitutoyo Control: Konventionell Storage location: Halberstadt Country of origin: Tschechien Tip length: 1500 Centre Height: 280 mm Centre Distance: 750,1000,15000,2000 mm Spindle Bore: 56 mm Swing diameter over bed: 500 mm Number of speed levels: 18 Circumferential diameter over the support: 320 mm Circumferential diameter over the bed recess: 560 mm Bed length relieved from headstock: 300 mm Universal chuck diameter: 250 mm Diameter of the clamping disc: 500 mm Further information: Universal center lathe
used
Ref. -No.: 10316 Manufacturer: TOS Year of construction: 1996 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Slovakia Machine length: 3450 mm Machine width: 2236 mm Machine Height: 2000 mm Weight Of The Machine Ca.: 4,4 t Grinding wheel: 260 mm Table Dimensions (Lengthxwidth): 1500 x 400 mm Height of grinding with new grinding wheel (without magnetic plate): 500 mm Grinding wheel fx width x bore: 350 x 40 - 80 x 127 mm Width of the composite grinding wheel: 200 mm Max. load on the work table: 5000 N Table surface: 400x1000 / 1500 mm Max. distance of the spindle axis: 675 mm Max. length of grinding: 1000/1500 mm
used
Manufacturer: Arminius Topfbohrautomat, Type: ST-10/S, Year: ca.1995, Control: hand, Function: Toploch Bohrautomat, One or two Spot machine: Einplatz, Working range X: 1500, Working range Y-axis: ca.100, Working range Z: 60, Drilling supprt from bottom: yes, Year :ca.1995
used
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
used
Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,
used
Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998
used
Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996
used
Key data: 2500 mm, 3000 mm, 2000 mm
Tos hulin CNC Sinumerik 840 C Year 1999 Table dia : 2500 mm Max turning did 3000 mm Max Turning hight 2000mm under power
used
Automatic Scale Pharma Version Manufacturer: Mettler-Toledo Garvens GmbH Type: C 3350 Year of construction 2019 Condition: as good as new Min.: 0 – max. 300 g D=0.05 g T= 270 g Documents available
used
Product number: 2803 Type: 1500 Serial number: 106 Year of construction: 1996 Cutting width: 380 mm Knives: 392 x 22 x 0.7 mm Compressed air: 4-5 Bar, 300 L/min. Power: 220VAC, 50Hz, 1Ph Dimensions: 700 x 600 x 1000 mm With pneumatic cleaning device for toothed roll