tnc 407 used for sale

CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table size 2200 x 1000 mm Longitudinal travel 2050mm Cross travel 1150 mm Vertical travel 760 mm Control Heidenhain TNC 530 Equipped with: Internal cooling, Synchronspindle, Hand wheel for axes travel ,Interface RS-232 C, Chip conveyor, Coolant, Service tools etc..

x-travel: 1350 mm y-travel: 650 mm z-travel: 650 mm Control: Heidenhain type: TNC 426 milling-head swivable +/-: 90 ° spindle taper ISO: 40 table surface area: 1600x800 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC tool milling machine make DECKEL type FP 3 NCMachine -No: 2837/0352 Year 1990Travel X: 400 mmTravel Y: 400 mmTravel distance Z: 400 mmSpindle speeds: 31.5 - 5000 rpm.Spindle mount: ISA 40Quill stroke: 80 mmFeed rate: 2 - 4000 mm / min.Single cut: 0.01 mmpermitted table load: 650 kgConnected load: 22 kWWeight approx: 1785 kgOutside dimensions approx. W x D x H: 2800 x 2500 x 2000 mmWith- Heidenhain TNC 355 CNC control- electronic handwheel- rigid table- universal tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 425 Technical data Number of axis total: 3 Table length: 900 mm Table width: 530 mm Number of T-channels: 8 T-channel width: 14H7 mm Distance of the T-slots: 63 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 450 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 22 with double gripper Spindle nose SK: 40 DIN 69871 Pull-Studs: DIN 69872 B Tool diameter: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5-15 sec Feeds: stepless longitudinal from: 2 mm/min up to: 10000 mm/min transversal from: 2 mm/min up to: 10000 mm/min verti ...

CNC milling machine make MIKRON type WF 21 CYear of construction 1986Travel X-axis: 400 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mm21 speeds continuously: 31.5 - 3150 rpm.Tool holder: ISO 40 M 16with insertion grooveQuill movement vertical: 90 mmFeed rate in all 3 axes: 2-3000 mm / minRapid traverse speed X- and Y-axis: 6000 mm / minRapid traverse speed Z-axis: 5000 mm / minelectrical connection power: 8.7 kWDimensions: 2900 x 2650 x 2000 mmWeight approx: 2300 kgWith- rigid angle table- CNC control Heidenhain TNC 155used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC vertical travel stand machining center with 4th axis Table size 2380 x 5000 mm. Movement x-axis 1760 mm. Movement y-axis 500 mm. Movement z-axis 780 mm. table load 800 kg Number of tools in the magazine 36 pieces. Maximum spindle speed 10,000 1/min. Tool cone DIN 69871A-40. CNC control Heidenhain TNC 430 M. If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

CNC tool milling machine make AUERBACH type FUW 400Masch. -No: 336 Year 1992 Commissioning 1996Table length X: 500 mmHeadstock travel Y: 400 mmTable perpendicular Z: 330 mmTable mounting surface: 710 x 400 mmPinolensenkrechtweg: 100 mmSpindle mount: ISA 402 speed ranges stepless: 50-3000 rpm.Feed rates along = X stepless: 1 - 1250 mm / minFeed rates across = Y stepless: 1 - 1250 mm / minFeed rates vertical = Z stepless: 1 - 1250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1600 mm / minDrive power: 6.0 kWOutside dimensions: 2900 x 2370 x 2350 mWeight approx. 2400 kgWith- HEIDENHAIN CNC control TNC 360 dialog control (defective)- automat. Clamping- rigid angle table- Part cabinusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We w ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle speeds maximum: 0 rpm Feed maximum: 0 mm/min Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Operating hours: 43291 Technical data Number of axis total: 3 Table length: 850 mm Table width: 530 mm Number of T-channels: 6 Distance of the T-slots: 63 mm T-channel width: 14H12 mm Table load max.: 400 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer: Number of tools: 36 Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Voltage 50 Hz 3x: 400 Volt Total power required: 40 kW Time under power: 62694 Hour Operating time: 43291 Hour Working time: 53367 Hour Spindle run time: 1304 Hour Noise level: 75 dB (A) Machine´s weight about: 6500 kg Overall dimensions machine: Length: 2500 mm Width: 1600 mm ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...

Tool milling machine make MAHO type MH 700Machine -No: 71139Technical specifications:Working area X 500 mm Y 465 mm Z 400 mmSpindle mount ISA 4018 spindle speeds 32 - 1600 rpm.Quill stroke 100 mmCross feed aut.:10 - 500 mm / min.Longitudinal feed 10 - 500 mm / min.Vertical feed 5 - 250 mm / min.Rapid traverse : 1.4 / 1.4 / 0.7 mUniversal table / clamping surface 820 x 480 mmTable lateral adjustment 200 mmTable can be swiveled by + - 30 °Can be tilted by + - 30 °Table rotatable around 360 °Drive power 3.0 kWFeed motor 1.1 kWWeight approx 2020 kgExternal dimensions approx . 1800 x 1500 x 1800 mmWith- Point-to-point control Heidenhain TNC 121- Universal milling table- automatic tool clamping- various tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 124 Technical data Number of axis total: 3 Table length: 800 mm Table width: 425 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 400 mm Table load max.: 250 kg Distance from vertical spindle to table: 560 mm Taper in spindle:: 40 SK Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from from: 5 rpm up to: 5000 rpm Swivel range Vertical milling head: +/- 90 ° Feeds: stepless longitudinal from: 0 mm/min up to: 2000 mm/min transversal from: 0 mm/min up to: 2000 mm/min vertical from: 0 mm/min up to: 2000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 7.5 m/min Vertical quill ...

CNC universal milling machine make HERMLE type PF 1000Machine -No: 5235 Year 1981Table size: 1000 x 315 mmLongitudinal movement X: 620/650 mmTransverse movement Y: 430/490 mmVertical movement Z: 400/420 mmSpindle mount DIN 2079: ISA 40Quill extendable: 80 mmminute / Max. Distance spindle / clamping surface: 80 - 500 mmminute / Max. Distance spindle / vertical Guide: 8 - 458 mmPivoting of the spindle head: 360 °12 spindle speeds: 45 - 2000 rpm.stepless feed rates all axes: 4 - 4500 mm / min.Drive power: 4.0 kWWeight approx: 1300 kgExternal dimensions approx. 1500 x 1200 x 2000 mmWith- CNC control Heidenhain TNC 145- Cooling device- side swing-away vertical milling headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our o ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 155P Operating hours: 3100 Technical data Table length: 1000 mm Table width: 560 mm Table load max.: 1000 kg Longitudinal travel (X-axis): 1000 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 550 mm Distance from spindle to table: 100 - 650 mm Taper in spindle: 40 ISO Spindle speeds: stepless from: 20 rpm up to: 3100 rpm Feeds: longitudinal from: 2 mm/min up to: 2000 mm/min transversal from: 2 mm/min up to: 2000 mm/min vertical from: 2 mm/min up to: 2000 mm/min Rapid traverse: longitudinal: 10 m/min transversal: 10 m/min vertical: 10 m/min Vertical quill travel: 80 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 11 kW Feed motor: 2.9 kW Machine´s weight about: 5500 kg Overall dimensions machine: Length: ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 155 / J200 Technical data Table length: 1020 mm Table width: 860 mm Longitudinal travel (X-axis): 900 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 635 mm Table load max.: 800 kg Taper in spindle: ISO: 40 Stroke of drilling spindle (Z-axis): 200 mm Distance table to spindle: 15 - 850 mm Spindle speeds: from: 10 - 800 rpm up to: 800 - 2500 rpm Feeds: Table: from: 5 mm/min up to: 5000 mm/min Drill spindle slide: number (steps): 6 from: 0.03 mm/r up to: 0.33 mm/r Distance between columns: 950 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 4.5 kW Machine´s weight about: 6500 kg Length: 2930 mm Width: 2370 mm Height: 2690 mm Various accessories: Drill chuck Set of boring head Centering microscop Set of tool holders

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

x-travel: 900 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain TNC 415 mx. distance bet.vert. milling head and table: 604 feed speeds infinitely variable: 2 - 3000 mm/min rapid traverse X- and Y-axis: 6000 m/min rapid traverse Z-axis: 4000 m/min turning speeds:: 21 spindle turning speed range: 40 - 4000 U/min spindle taper: ISO: 40 / M16 quill stroke: 90 mm table dimension - longitudinal: 500 x 1000 mm number of T-slots: 7 workpiece weight: 500 kg 0: 13,5 kw weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine make MIKRON type WF 2/3 DPwith positioning and path control HEIDENHAIN TNC 121Year of construction 1981Longitudinal path X: 400 mmTransverse Y: 400 mmVertical path Z: 575 mmSpindle mount: ISA 4024 spindle speeds: 30 - 2240 rpm.Feed rates steplessly all directions: 1 - 750 mm / min.Rapid traverse in all directions: 1500 mm / min.Drive power: 6 kWWith- autom. Clamping- quill stroke- swiveling vertical milling head- rigid angle table 450 x 800 mm- Steering control HEIDENHAIN TNC 121- Manual mode, can be conventionalxa0xa0xa0 be worked with digital display- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mac ...

Machine Details Warehouse number 1105-03498 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1020 Year of construction 2001 Control type CNC Control heidenhein 410 Storage location HAGUENAU Country of origin Taiwan Delivery time immediately Freight base from stock HAGUENAU FRANCE Technical details x-travel 1020 mm y-travel 510 mm z-travel 510 mm Table clamping surface 1200 x 600 mm Speed range - milling 60 - 8000 rpm Control heidenhein 410 Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 20 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 5500 kg Space requirement approx. 2300x2200x2600 mm Information very nice MACHINE CONTROL heidenhain tnc 410

CNC Universal milling machine make MAHO type MH 400 PFabr. -No: 41837 Year 1983vertical clamping surface: 800 x 200 mmWorking area along X: 400 mmWorking area vertical Y: 375 mmWorking area transverse Z: 250 mmTool holder: ISO 40Tool clamping: automaticQuill stroke vertical: 50 mmstepless speed adjustmenthorizontal and vertical: 40-3150 rpm.Feed range X and Y: 5 - 750 mm / minFeed range Z: 5 - 500 mm / minRapid traverse X and Y: 1.2 m / minRapid traverse Z: 0.8 m / minMain drive: 2.2 kWOutside dimensions approx: 1000 x 1300 x 1750 mmWeight approx: 850 kgWith- Point and distance control HEIDENHAIN TNC 135- rigid angle table- Horizontal milling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always  ...

Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...

Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service -  ...

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

Control: HEIDENHAIN 407 Technical data Table length: 2000 mm Table width: 730 mm Table load max.: 3000 kg Longitudinal travel (X-axis): 1800 mm Transversal travel (y axis): 815 mm Vertical travel (z axis): 802 mm Distance from spindle to table: 805 mm Taper in spindle: 50 ISO Spindle speeds: from: 0 rpm up to: 2250 rpm Feeds: longitudinal from: 1 mm/min up to: 5000 mm/min transversal from: 1 mm/min up to: 5000 mm/min vertical from: 1 mm/min up to: 5000 mm/min Rapid traverse: all axis: 8 m/min Milling spindle motor: 15 kW Total installed power: 27 kW Machine´s weight about: 8000 kg Overall dimensions machine: Length: 3300 mm Width: 4700 mm Height: 2715 mm Various accessories: Set of toolholders Lamp

Hydraulic double acting pipe pulling and reducing machine Fabr. OWN CONSTRUCTIONFor connection of outer and inner tubeConsisting of:1.) Vertical hydraulic double acting pressxa0xa0xa0xa0xa0 Table size: 565 x 450 mmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Distance between the stands: 700 mmxa0xa0xa0xa0xa0 lateral. Passage: 285 x 200 mmxa0xa0xa0xa0xa0 Piston diameter: 90 mmxa0xa0xa0xa0xa0 External dimensions: 1400 x 650 x 2100 mmwith separate hydraulics2.) Horizontal hydraulic double-acting pressxa0xa0xa0xa0xa0 Power: 450 atmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Cylinder diameter: 100 mmxa0xa0xa0xa0xa0 External dimensions: 2400 x 1500 x 1200/3000 mmwith attached crane jib and STEEL chain hoist 600 kg3.) large lot of tools (about 30 pieces)xa0xa0xa0xa0 from 21.3 to 407 mmxa0xa0xa0xa0xa0 with intermediate sizes of 50, 57, 60, 60.3 mmusedPrice on request ...

Control: HEIDENHAIN TNC 415 Operating hours: 15285 Technical data Table length: 1300 mm Table width: 700 mm Table load max.: 2500 kg Longitudinal travel (X-axis): 1200 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 600 mm Execution: universal milling head Taper in spindle: 40 ISO Spindle speeds: from: 20 rpm up to: 3150 rpm Feeds: longitudinal from: 1 mm/min up to: 4000 mm/min transversal from: 1 mm/min up to: 4000 mm/min vertical from: 1 mm/min up to: 4000 mm/min Rapid traverse: all axis: 8 m/min Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 11.2 kW Total power required: 40 kVA Machine´s weight about: 8800 kg Overall dimensions machine: Length: 3700 mm Width: 3525 mm Various accessories: Coolant system Chip conveyor Lamp

Key data: 2400 Heidenhain, 700 TNC 355, 2000

Table length: 2400 mm Table width: 700 mm Longitudinal X: 2000 mm Cross Y: 1100 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 355 X-Axis:         2.000mm Y-Axis:         1.100mm Z-Axis:         1.000mm Table Length:   2.400mm Table Width:    700mm Table load:     3.000Kg Power on spindle:16kW Spindle speeds: 1600Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:6.000mm/min. Feed rate Y-Axis:6.000mm/min. Feed rate Z-Axis:6.000mm/min. Length:         5.100 mm  Width:          4.250 mm  Height:         3.100 mm  Weight:         12.000 kg 

Key data: 4100 Heidenhain, 900 TNC 426, 3600

Table length: 4100 mm Table width: 900 mm Longitudinal X: 3600 mm Cross Y: 1000 mm Vertical Z: 1600 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 A2 Milling head Vertical + Horizontal Chain ATC 30 Positions Double chip conveyor Doors for closed enclosure X-Axis:         3.600mm Y-Axis:         1.000mm Z-Axis:         1.600mm Table Length:   4.100mm Table Width:    900mm Table load:     8.000Kg Power on spindle:38kW Spindle speeds: 4000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:10.000mm/min. Feed rate Y-Axis:1.000mm/min. Feed rate Z-Axis:10.000mm/min. Length:         9.950 mm  Width:          5.950 mm  Height:         3.800 mm  Weight:  ...

Key data: 5000 Heidenhain, 1000 TNC 426, 5000

Table length: 5000 mm Table width: 1000 mm Longitudinal X: 5000 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 60   CNC Brand: Heidenhain CNC Model: TNC 426 ATC Chain changer 60 positions 4e axis integrated in CNC Tailstock for 4e axis Renishaw 3D Taster Recent milling head rebuild BIG tooling package X-Axis:               5.000mm Y-Axis:               1.200mm Z-Axis:               1.500mm Table Length:         5.000mm Table Width:          1.000mm Table load:           10.000Kg Power on spindle:     29,6 kW Spindle speeds:       3000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     10 ...

Manufacturer: SHW Machine Tools Type: UF 21 Routes X,Y, Z: 1000, 600, 625mm Control: Heidenhain TNC 155 Table: Folding table 1000 x 630 mm Automatic swivel head Pinole 120mm Milling spindle holder SK 40 Speed 2500rpm Overhaul 2016 Partial overhaul 2022 About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Table length: 6000 mm Table width: 3000 mm Longitudinal X: 6000 mm Cross Y: 3600 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 SORALUCE - FR 6000 Floor Type Milling Boring Y-Travel 3600 mm MACH - ID 6361 Make: SORALUCE Type: FR 6000 Control: HeidenHain TNC 426 YOP: 1999 X-Axis    6.000 mm Y-Axis    3.600 mm Z-Axis    1.500 mm Table Length      6.000 mm Table Width        3.000 mm Table load           20.000 kg Power on spindle       35 kW Spindle speeds           3000 Rpm Spindle Taper             50 ISO/Bt/Mk Feed rate X-Axis        12.000 mm Feed rate Y-Axis        ...

Spindle diameter: 0 mm Longitudinal X: 9000 mm Vertical Y: 4000 mm Cross Z: 1000 mm Positions ATC: 80   Table length: 2500 mm Table width: 2500 mm Number of tables: 1   CNC Brand: Heidenhain CNC Model: TNC 430 WMW - BP 160 CNC Floor type Horizontal borer Ø 160 with Y 4000 mm MACH - ID 6368 Make: WMW Type: BP 160 Control: HeidenHain TNC 430 YOP: 2001 X – Travel    9.000 mm Y – Travel    4.000 mm Z – Travel    1.000 mm W – Travel     800 mm Table Length      2.500 mm Table Width       2.500 mm Table load          30.000 kg Speeds / ranges        2000 Rpm Power         52 kW Ram size    500 x 620 mm Spindle Taper        Iso 50 IS ...

Table length: 12000 mm Table width: 1000 mm Longitudinal X: 9300 mm Cross Y: 1000 mm Vertical Z: 2100 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MECOF - CS 140 CNC bed milling 9300 x 1000 x 2100 mm ATC + Index head MACH - ID 6319 Make: MECOF Type: CS 140 Control: HeidenHain TNC 426 YOP: 2000 X-Axis    9.300 mm Y-Axis    1.000 mm Z-Axis    2.100 mm Table Length    12.000 mm Table Width       1.000 mm Table load          25.000 kg Power on spindle      25 kW Spindle speeds      2000 Rpm Spindle Taper       50 ISO/Bt/Mk Millinghead auto-index      1,3 x 1,3 ° Dimensions Length     12.000 mm Width        4.000 mm Hei ...

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4250 mm Cross Y: 1200 mm Vertical Z: 1400 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 CORREA - L30 43 Moving column bed milling 4250 x 1200 x 1400 mm MACH - ID 6213 Make: CORREA Type: L30 43 Control: HeidenHain TNC 426 YOP: 1993 X-Axis     4.250 mm Y-Axis      1.200 mm Z-Axis       1.400 mm Table Length      6.000 mm Table Width       1.000 mm Table load          20,000 kg Power on spindle       22 kW Spindle speeds         2000 Rpm Spindle Taper         50 ISO/Bt/Mk Feed rate X-Axis     5.000 mm Feed rate Y-Axis      5.000 mm Fe ...

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1900 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 355 MACH-id    5029 MAKE         MECOF Italia TYPE            CS 88 G YOP              1991 SPECIFICATIONS X-Axis       4300 mm Y-Axis       1900 mm Z-Axis        1000 mm Table size Length x Width      6000 x 1000 mm Table load in kG     10.000 Kg kW power on spindle      20 kW Spindle speeds   1600 Rpm Spindle taper       50 ISO/Bt Feed rate X-Axis       6000 mm/M Feed rate Y-Axis         6000 mm/M Feed rate Z-Axis  & ...

Used 903Kw POWER-CIAT LXH.M 3750 HPS aircooled chiller with integrated hydraulic module. Complete with 3x Bitzer CSH8561-125Y-40P hermetic screw compressor with economizers. Direct expansion shell and tube evaporator with a water capacity of 219 ltr. Aircooled condenser with 12 fans diameter 800 mm and airflow of 264.000 m3/h. Electric control with microprocessor Xtra connect. Capacity control from 17 to 100%. Hydraulic module with buffer tank 950 ltr, expansion vessel 80 ltr and twin centrifugal pump. Specifications: Our inventory stock No. 12831 Brand CIAT Type LXH.M 3750 HPS Product type Air Cooled Chiller Capacity kW 903 Capacity Tons 256,8 Refrigerant Freon Refrigerant Type R 407C Liquid buffer tank Pump Hydronic Module Weight in kg. 8.576 kg Sizes 9400x2500x2200 mm (LxWxH) Compressor(s) type & model 3x Bitzer CSH8561-125Y-40P Display Ciat xtraconnect cont ...

Table length: 8500 mm Table width: 1200 mm Longitudinal X: 7400 mm Cross Y: 1250 mm Vertical Z: 2000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 PB MACH-id    4179 MAKE         Zayer Spain TYPE          30KM YEAR         2005 SPECIFICATIONS X - Travel        7400 mm Y - Travel         1250 mm Z - Travel           2000 mm Controll      TNC 426  PB Table Length x Width     8500 x 1200 mm Table load in kG     30000 Kg Spindle Taper      Bt50 kW power on spindle      37 kW Spindle speeds / ranges       3000 Rpm CNC Automatic milling head / Gr.2 x 180.000 DIMENSIONS Length    ...

Table length: 5500 mm Table width: 1500 mm Longitudinal X: 6000 mm Cross Y: 1400 mm Vertical Z: 2400 mm Positions ATC: 90   CNC Brand: Heidenhain CNC Model: iTNC 530 MACH-id   4145 MAKE       MTE Spain TYPE         FBF-M 6000 YEAR        2014 SPECIFICATIONS X - Travel     6000 mm Y - Travel     1400 mm Z - Travel      2400 mm bed / plano / portal / moving column      Moving column Controlli       TNC 530 Table Length x Width       5500 x 1500 mm Table load in kG      15.000 Kg Spindle Taper      Sk50 kW power on spindle      36 / 1750 Nm kW Spindle speeds / ranges         4000 Rpm ATC tool changer    &nbs ...

Version Type RKV 4.3 K DK Refrigerant R 407 c Refrigerant charge kg 3.2 Cooling capacity at tw +20°C kW 12,2 Operating pressure max. bar 28 Temperature range Water flow min. °C + 10 Water flow max. °C + 25 Ambient temperature min. °C + 10 Ambient temperature max. °C + 50 Compressor at tc/to=53/15°CZR 61 Number of pcs. 1 Fully hermetic design Nominal power kW 6 Rated current A 9 Rated current max. A 11 Evaporator Plate arm exchanger version Material copper Condenser Air-cooled, axial version Material Cu tube / aluminium fins Fan FB050-VDK.4I.V4S Number of pcs. 1 Axial fan version with blade Nominal power kW 0,8 Nominal current A 1.6 Air flow m³/h 5000 Rated speed n 1290 Electronic version Digital temperature display Switching capacity AC / A 2 Dimensions Width approx. mm 750 Depth approx. mm 1050 Height approx. mm 1100 Weigh ...

Table length: 4200 mm Table width: 1000 mm Longitudinal X: 4000 mm Cross Y: 1200 mm Vertical Z: 1000 mm Positions ATC: 30   CNC Brand: Heidenhain CNC Model: TNC 415 MACH-id   4111 MAKE       CME Spain TYPE         BF - 06 YEAR        1995 SPECIFICATIONS X - Travel      4000 mm Y - Travel      1200 mm Z - Travel      1000 mm bed / plano / portal / moving column          Bed milling Controll         HeidenHain TNC 415 Table Length x Width        4200 x 1000 mm Table load in kG        4000 Kg Spindle Taper        Bt 50 kW power on spindle       22 kW Spindle speeds / ranges      3000 Rpm ATC tool c ...

Spindle diameter: 0 mm Longitudinal X: 14500 mm Vertical Y: 3750 mm Cross Z: 1600 mm Positions ATC: 0   Table length: 0 mm Table width: 0 mm Number of tables: 0   CNC Brand: Heidenhain CNC Model: TNC 430 MACH-id    402 MAKE        Skoda TYPE         W 200 HB YEAR        1999 SPECIFICATIONS Controll        HeidenHain TNC 430 Floor or table type borer     Floor X - Travel      14.500 mm Y - Travel      3750 mm Z - Travel       1600 mm W - Travel      2000 mm Spindle Diameter Ø  200 mm Spindle Taper     Sk 50 Ram size     520 x 520 mm kW power on spindle    78 kW Spindle speeds / ranges    0,9 - 930 Rpm Number off controlled axi ...

Fridge and freezer Capacity: 340/82 L Voltage: AC 230/240V Frequency: 50Hz Ampere: 2.5/2.4 A Power Consumption: 350/365W heating: 159W Refrigerant: R-134a: R-407D Load: 80: 113g, Weight (kg): 126, Dimensions (mm): 810x610 H1820, Elec: 230/240V 50Hz 2.5/2.4A, Volume (L): 340/82

Table length: 2200 mm Table width: 850 mm Longitudinal X: 2000 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 10   CNC Brand: Heidenhain CNC Model: TNC410 MAKE   CME Spain TYPE     BF 03 YEAR    1999 SPECIFICATIONS X - Travel     2000 mm Y - Travel     1000 mm Z - Travel      1000 mm bed / plano / portal / moving column bed milling machine          Controll      HeidenHain TNC 410 Table Length x Width    2200 x 850 mm Table load in kG      4000 Kg Spindle Taper      Bt 50 kW power on spindle    22 kW Spindle speeds / ranges    3000 ? Rpm ATC tool changer   ATC 10 Coolant true spindle / Bar    10 Bar Number off controlled axis      & ...

Table length: 9500 mm Table width: 1200 mm Longitudinal X: 9000 mm Cross Y: 1500 mm Vertical Z: 1500 mm Positions ATC: 60   CNC Brand: Heidenhain CNC Model: TNC 430 MACH-id   3515 MAKE   CME Spain TYPE  FCM 9000 YEAR   2000 SPECIFICATIONS X - Travel  9000 mm Y - Travel  1500 mm Z - Travel  1500 mm bed / plano / portal / moving column  Moving column bed milling Controll   TNC 430 Table Length x Width  9500 x 1200 mm Table load in kG   5000 / M Kg Spindle Taper  Bt 50 kW power on spindle  40 kW Spindle speeds / ranges   3000 Rpm ATC tool changer   60 Coolant true spindle / Bar  20 Bar Number off controlled axis   3 + 2 = 5 Axis CNC Automatic milling head / Gr.1 Gr. Orthogonal DIMENSIONS Length    16000 mm Width   6000 mm Height   7000 mm  ...

Table length: 2000 mm Table width: 630 mm Longitudinal X: 1700 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MAKE   Zayer Spain TYPE   ZF 2000 YEAR   1996 SPECIFICATIONS   X - Travel  1700 mm Y - Travel   800 mm Z - Travel  800 mm bed / plano / portal / moving column  Bed milling machine Controll   Heidenhain TNC 426 Table Length x Width   2000 x 630 mm Table load in kG   6000 Kg Spindle Taper   Sk 50kW power on spindle  15 kW  

Table length: 1700 mm Table width: 1000 mm Longitudinal X: 1500 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MAKE  MTE Spain TYPE   BF 1700 YEAR   1998 SPECIFICATIONS X - Travel   1500 mm Y - Travel  1000 mm Z - Travel  1000 mm bed / plano / portal / moving columnbed milling Controll   HeidenHain TNC 426 Table Length x Width   1700 x 1000 mm Table load in kG  2000 Kg Spindle Taper  Sk 50 kW power on spindle   15 kW Spindle speeds / ranges  2500 Rpm Number off controlled axis  3  

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: SK 40 SPECIFICATIONS X - Travel  500 mm Y - Travel  400 mm Z - Travel  400 mm bed / plano / portal / moving columnVMC Controll  TNC 124 Table Length x Width  700 x 500 mm Table load in kG  200 Kg Spindle Taper   Sk 40kW power on spindle   9 kW Spindle speeds / ranges  4500 Rpm  

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide before rot ...

Table length: 1400 mm Table width: 1400 mm Longitudinal X: 3000 mm Cross Y: 2000 mm Vertical Z: 1000 mm Positions ATC: 60   CNC Brand: Heidenhain CNC Model: i TNC 530 in 5 Axis SPECIFICATIONS X - Travel   3000 mm Y - Travel  2000 mm Z - Travel   1000 mm W - Travel  700 mm bed / plano / portal / moving column   Milling & Boring Controll   iTNC 530 in 5 Axis Table Length x Width   1400 x 1400 mm Table load in kG   5000 Kg Spindle Taper  Iso 50 kW power on spindle  30 kW Spindle speeds / ranges  2200 Rpm ATC tool changer  60 Coolant true spindle / Bar  60 Bar Bar Number off controlled axis  5