tlas copco used for sale

160,0 kW, max. 7,5 bar, 28,26 m3/min.

55,0 kW, max. 7,5 bar, 7,60 m3/min.

200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.

200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.

75.0 kW, max. 9.8 bar, 11.05 m3/min.

Oil-free. Water cooled.

Oil-free. Water cooled

oil-free, water cooled.

75,0 kW, max. 9,8 bar, 11,05 m3/min.

90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.

90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.

315.0 kW, max. 10.0 bar, 45.70 m3/min.

315,0 kW, max. 10,0 bar, 45,70 m3/min.

30,0 kW, max. 7,5 bar, 4,86 m3/min.

75.0 kW, max. 7.5 bar, 12.60 m3/min.

11.80 kW, max. 10.5 bar, 56.50 m3/min.

Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 21.66 m3/min. New Elektronikon control at 20000 total hours. Actual operating hours 21409

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

110,0 kW, max. 20,0 bar, 12,60 m3/min, with built in dryer, only 80 working hours. Condition as new.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

14.5 bar, 22.80 m3/min, refrigerant R 404a.

14.5 bar, 43.50 m3/min, refrigerant R 404a.

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

110.0 kW, max. 8.5 bar, 18.72 m3/min.

Air Pressure: 42 bar

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

110,0 kW, max. 8,5 bar, 18,72 m3/min.

250 kW, max. 10.0 bar, 35.88 m3/min.

250 kW, max. 10,0 bar, 35,88 m3/min.

200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810

90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.

Komori Lithrone LS 529 H-UV Age: 2015 Counter: 70 mio. Impression Format: 53 x 74 cm Substrate thickness: 0.06 – 0.8 mm Printing Performance: 16,000 sheets/h Equipment: 5 color machine Straight machine FAPC (Full Automatic Plate Changer) Komorimatic Dampening System Technotrans alpha.c with alcosmart Ink temperature control Automatic washing devices (Ink roller, Blanket, impression) Komori PQC-S (Print Quality Control System) Komori KHS-AI (KHS Advanced Interface for very short Make readies with minimum paper waste) Komori AMR (Automatic Make Ready) Komori Self Diagnosis Komori Smart Feedback Komori PCC 2.3x Komori PDC-SII (Print Density Control-Spectrodensitometer) Ultrasonic Double Sheet Detector Skeleton Transfer Cylinder Double-sized Impression- and Transfer Cylinder Cardboard Printing H-UV Dryer Baldwin Air Blast Cooler for UV-lamps High Pile Delive ...

90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.

90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.

90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.

75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.