titan umaro used for sale

Kiln 1200C inner dimensions 1x1x2m 2 heating zones auto door Fours pour la fonderie Fours pour la forge et le matriçage Fours pour les traitements thermiques Equipements périphériques Fours pour verres feuilletés Fours Basse température Fours à passage continu Fours céramique Fours à creuset pour fusion et fusion-maintien des métaux non ferreux Creusets pour fonderie Fours pour cuisson et décirage de carapaces de fonderie à cire perdue Fours de forge standard Fours à creuset Fours Haute température Fours de laboratoire Fours de trempe Fours de recuit chauffé à l'électricité chauffé au gaz four standard chauffés à l'électricité four standard chauffés au gaz Fours à longerons mobiles Fours de thermoformage Fours de séchage Fours de polymérisation Fours pour le verre Fours Fours à sole tournante de bombage Fours de revenu  ...

It is an AERA slicer line for the preparation of cordon bleus. GENERAL TECHNICAL SPECIFICATIONS: - Overall dimensions of the bridge (L x W x H): 8000 x 4700 x 3800 mm. - Overall dimensions of the conveyor (L x W x H): 6400 x 1000 x 970 mm. - Overall dimensions of a slicer (L x W x H): 1880 x 1030 x 2460 mm. - Number of tracks: 4 - The maximum noise level of the line: 80 dba - Operation of the line: continuous - Capacity: 15000 products/h COMPOSITION: 1 platform with access staircase 1 packing conveyor 3 ribbon slicers suspended under the walkway 3 preparation tables on the bridge PACKING CONVEYOR - Overall dimensions (L x W x H): 6400 x 1000 x 970mm. - Weight: 970 kg - Sliding plane height: 960 +/- 50mm. - Stainless steel tubular legs and jacks - Synchronous tape width 600mm. - Lyre winding - Pneumatically operated belt quick release system Control by servo-mo ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...

Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

Plates,titanuim,for heat exchanger,GT45D6,G6732

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

turning length: 2000 mm centre height: 330 mm swing diameter over bed slide: 660 mm swing diameter over slide rest: 460 mm turning dia. in gap: 900 mm spindle bore: 105 mm turning speeds: 25 - 1600 U/min bed width: 400 mm spindle taper: 55029 D 1-8 taper in tailstock: 5 MK quill travel: 235 mm total power requirement: 7,5 kW weight of the machine ca.: 2900 kg. range L-W-H: 3630 x 1200 x 1520 mm scope of delivery - 3-axis digital display ES-12 V with LCD display - slip clutch - Rapid traverse lengthways and flat - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - coolant device - Quick change tool holder with 4 inserts ...

Working width: 3000mm, weight: 1.95t, with wheel loader attachment quick change attachment with rollers level compensation, water spray device 400l complete with 12V pressure pump and on/off switch, pressure pump 24V for water spray device, water spray device for side brush, flag holder incl. warning flags and warning marking and LED lighting device according to StVZO, the machine has not been used.

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1600 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2.370 kg. range L-W-H: 2.840 x 1.150 x 1.460 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - red ...

turning length: 2000 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm quill:: 5 MK spindle bore: 105 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 2720 kg. Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - o ...

USED TITANIUM CENTRIFUGAL PUMP REF.: C5811

REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm

Spindle diameter: 200 mm Longitudinal X: 12800 mm Vertical Y: 4000 mm Cross Z: 1100 mm Positions ATC: 0   Table length: 0 mm Table width: 0 mm Number of tables: 0   CNC Brand: Fanuc CNC Model: 31 i MAKE   PAMA TITAN License TYPE    AFP 200 YEAR   2006 Retrofitted SPECIFICATIONS Controll    FANUC 31i Floor or table type borer   Floor borer X - Travel   12.800 mm Y - Travel    4.000 mm Z - Travel     1100 mm W - Travel     900 mm Spindle Diameter Ø   200 mm Spindle Taper    ISO 50 Ram size   600 x 530 mm kW power on spindle    100 kW Spindle speeds / ranges   1500 Rpm Number off controlled axis   4 DIMENSIONS Length   18000 mm Width     10000 mm Height     ...

Make Erba Model Titan 3 Year 1970 ? Max size 800 x 1200 mm Details 2 chases, threadle operated, complete with adjutment key

Conventional Vertical Lathe UMARO SC 53 faceplate diam - 4700mm max turning - 5300mm max height of workpiece - 2270mm max. workpiece weight - 25T

VTL 33 CNC exceptional height 3600 UMARO Table diameter: 3000 mm Maximum machining diameter: 3300 mm Maximum working height: 3600 mm Maximum work piece weight: 18 tones

Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm

Technical Details: Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41; 51)kW Machine tool tape: ...

Heavy Duty 1 column Vertical Lathe UMARO SCM 60/100 Technical Specifications: Faceplate diameter: 4770mm Max. turning diameter: 6300mm Max. height of workpiece: 3500mm CNC Control Max. workpiece weight: 150 tons

Maximum turning diameter: 8000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE dimensions: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,6÷45 RPM Table speed range –milling mode: 0,05÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41)kW Machine tool tape: ISO 50 WEIGHT ...

CNC Vertical Lathe IM Roman, UMARO w/ 2500mm dia Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons

BYSTRONIC Byspeed 3015 laser cutting machine was built in Switzerland in 2004. The machine equipped with an extremely reliable BYSTRONIC Bylaser 4400 laser source with a power of 4.4 kW, performs the cutting and engraving process on workpieces with a maximum thickness of 25 mm (structural steel), 20 mm (stainless steel), 12 mm (aluminium) and 3 mm (brass, copper, titanium). Workpiece machining is performed on a large work table with a length of 3000 and a width of 1500 mm, allowing free access to the laser’s work area and for loading larger-size sheets weighing up to 890 kg. The control panel with BYSTRONIC ByVision CNC controller for programming the machining parameters has been placed on the arm to increase the machine operator’s comfort. Characteristics of the BYSTRONIC Byspeed 3015 laser cutting machine - maximum laser power: 4.4 kW - wavelength: 10.6 μm - laser beam di ...

Vertical Turning Lathe with Double Columns UMARO SC 53 Technical Data: Table diameter: 4500mm Max. turning diameter: 5000mm Max. height of workpiece: 3000mm Conventional Control Max. workpiece weight: 30 tons Working table range of rotation speed: 0.85-25.4 r/min Working table step of rotation speed: stepless Horizontal travel of tool post: 2650mm Crossbeam travel: 2150mm Power of main motor: 75 kW Weight of machine (approx.): 80tons

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 100mm max - 2 center points - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First fill with Shell Tellus 46 - Rapid traverse longitudinal and face - slip clutch - Cooling device - Quick change steel holder with 4 inserts - Protective device for quick-change tool holder - LED machine light  ...

Construction folding machine make CIDAN type BA 200Masch. -No: 18127/02 built in 1999especially suitable for use on construction sitesin all-welded steel constructionTechnical specifications:Working length: 2050 mmMax. Sheet thickness 160 N / mm2 Titanium zinc DIN 17770: 0.8 mmStroke of the upper beam: 75 mmBending beam thickness: 15 mmOutside dimensions approx: 2350 x 275 x 1100 mmWeight approx: 160 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

workpiece diameter ... 2150mm Table diameter ... 2000mm maximum table load ... 12 000kg workpiece height ... 1500mm Axis Z ... 1300mm Average of the sanding piece... 250x250mm Pivot of the clamping plate ... 1-150 rpm Main engine power ... 75kW L x W x H ... 3600x4700x7200mm Machine weight ... 31350kg

8 up Thermal CTP Screen 8600 NZ year 2016 Only 25.000 plates produced with Multicasett loader with processor Titanium Stacker with Equios Workflow

Swing: 2200 mm Table diameter: 2000 mm Max. working height: 1500 mm Table speed range: 1-140 rpm Max. work-piece weight: 12000 kg Right head vertical stroke: 760 mm Left head vertical stroke: 1250 mm Ram travel: 1500 mm Main motor: 55 kW Dimensions: -Length: 4600 mm -Width: 4300 mm -Height: 4200 mm Machine weight: 32000 kg

(1) Gas (2) Fuel (3) Electric: 2   Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES  ;Furnaces are used in many industries to produce a wide range of products under demanding requirements.  this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements.  with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...

Feed hopper, DD screen box 1,550 x 4,880 mm, oversize and medium grain belt, swivelling fine grain belt, DEUTZ diesel engine with 72 kW, weight: approx. 32 t.

Used ConceptLaser Mlab Cusing R for sale. All firmware and software updates are updated by GE technicians. Annual maintenance and service by GE. Titanium was used almost exclusively on the machine. - The machine comes with onboard parameters for the following materials: SS 316L, 17-4, Aluminum AlSi10Mg, Titanium CPTi Grade 2, Titanium Ti6Al4V ELI Grade 23, remanium star® CL (CoCrW), rematitan® CL (Ti6Al4V ELI). Cobalt Chrome, Bronze CuSn - Software CL WRX Control 2.0 (current status) is available on the machine and electronically - Original documentation is included, Layer thickness: 15 - 30 my, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 705x1848x1220, Weight in kg: about 600

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 120mm max - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - First fill with Shell Tellus 46 - Clamping disc 450 mm - 2 center points - Frequency converter - Digital speed display - slip clutch - Rapid traverse longitudinal and face - Cooling device - Quick change steel holder with 4 inserts - ...

The DPL-6030/40/5 axis fiber laser system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as ovals Profilen.In the table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-6030/40/5 axes Laser shaft length 1070 nmLaser power 2000W IPG fiber laserConnected load 13.5 kWMax driven axes 4 - 7 ( 7 axis option )X./ Y axes Positioning accuracy ±0.08 X / Y axes Repeatability ±0.04 X / Y axes Travel speed 80 m/minMax, cutting speed 30 m/minMin. Cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 6 mm , Stainless steel: 5 mm Cutting material stainless steel, black steel St37 , titanium ...

The DPL-7040/5 axis system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as oval profiles. The table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-7040/5 axes Laser wavelength 1070 nm Laser power 2000W IPG fiber laser Connected load 13.5 kW , Max driven axes 5 ,X./ Y axis positioning accuracy ±0.08 X / Y axis repeatability ±0.04 X / Y axis travel speed 80 m/min Max, cutting speed 30 m/min Min. cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 7 mm , Stainless steel: 6 mm cutting material stainless steel, black steel St37, titanium, aluminum and much more. Machin ...

Antistatic tape, 9 pieces TITANTEC FS2043 Length: 470 mm Cross section : 14 x 6 mm Clamping screws: M6 x 1.0 Other quantities on request ! New ! Dimensions ( single package ): 350 x 105 x 25 mm

DC motor with forced ventilation and tachogenerator THRIGE-TITAN (T-T) LAK 160LA 11,0 kW 1800 / 4500 rpm 400 V external excitation: 270 V forced ventilation 0.55 kW 220 / 380 V Shaft: Ø 38 mm Flange: 300 x 300 mm used, tested ! Dimensions: 800 x 350 x 670 mm

Roller conveyor type G with Titan blastwheels max entrance width: 1100 mm max entrace height: 550 mm 4 turbines, each 11 kW working speed: 1,4 gt; 2,4 m/min Total power: 62kW Installed on top of floor, no foundation needed! 65 000€ spare parts inlcuded Length : 15 meter Width : 3 meter Height: 5,35 meter Weight: 20 ton

Clipping machine Poly Clip Type: FCA 160 Made of stainless steel and titanium Easy to maintain Low noise level Adjustable conveyor belt speed Dimensions: 1680x1220x2000mm (min) 1800x1300x2150mm (max) Electrical power: 4kW Voltage: 200 – 480V, 50/60 Hz Compressed air: 5 – 7 bar / 0.5 – 0.7 MPa Weight: 625 kg

The compact horizontal machining center is designed for milling, boring, drilling and threading in the manufacture of complex parts from various metals and alloys in a single and batch production. The two-stage automatic spindle box allows for 4-axis machining of both light alloys and power machining of titanium and tungsten alloys.

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

The stripping unit model 99913 is a modern system developed by Kuzlitmash. The combination of reliability, strength, and precision makes the 99913 ideal for grinding parts. The processing technology on the 99913 has been tested by operation for many years in the most difficult conditions for cleaning the outer surfaces of iron, steel, and titanium castings.

working width: 250 mm working length: 250 mm work height max.: 280 mm laser capacity in Watt: 400 Rofin travel -z axis: 10 - 1000 mm/s positioning accuracy: +/- 0,1 mm repeating accuracy: +/- 3,5 my capacity: 6,8 kVA Required air-pressure: 6-10 bar Type of gas: Schtzgas Stickstoff 5 bar dimensions of the machine ca.: 5,9 x 4,2 x 3 m range L-W-H: 2,44 x 1,63 x 2,36 m weight: 2 300 kg Electric 400 Volt: Software: Concept Laser Concept Laser M2 Cusing system for processing reactive and non-reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo  ...

0: ja Working width: 2500 mm 0: nein Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pneumatic stops Pneumatic magazine screwdriver Fittings shelf Support table covered with felt Special screwdriver Screw feeder fitting punch Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. (Technical information according to manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 6300 mm, 1 mm

Fully hydraulic high-performance band saw in the heaviest design, with horizontal parallel movable saw blade, for cutting profiles, tubes and solid material in all Qualities, including material that is extremely difficult to machine (e.g. Titan, Inconel, Hastelloy) Guidance of the sawing unit via two vertical square columns with hardened and ground guide rails. Hydraulic band saw clamping and hydraulically pre-tensioned Carbide band saw guides. The material is clamped by two hydraulic clamping vices. The feed length can be adjusted by means of a counter with a resolution of 0.1 mm. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machine is easy to operate and is fully automatic. max. material diameter 420 mm max. feed single 6300 x 41 mm Multiple feed 9,999 mm smallest diameter to be sawn 10 mm Shortest remnant length in automatic ...

General SKU416T1313 LocationBarneveld MakeFaure Equipments TypeFILTRE PRESSE TITAN 218 Mixed Pack Full Auto No.73 Year of construction2013 Pressure Working pressure5 Bar Main Features MaterialPolypropylene Pressure8 Bar Surface52.92 m2 Specified Features - Filterpress Filter presscheck Filter surface50 m² Recessed chamber platescheck Number of platens52 Internal platen sizes770x770 mm External platen sizes1000x1000 mm Platen thickness91mm (x26), 57 mm (x26) Frame thickness5,44 mm With membranes on platenscheck Cake capacity1100 Ltr. Central inletcheck ConnectionsDN80 (2x), DN25 (2x) With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor5,5 kW MaterialPolypropylene Information Floorspace7,8x2,2 m Total height3,2 m Weight10000 kgFilterpressesFaureFilters > FilterpressesBrand > Faure What you can expect from Foeth: -- Machine i ...

We have a Trumpf FIBER TruLaser 3030 (L49) laser cutter for sale. Basic parameters: - X / Y axis working area: 3000 x 1500 mm - Z axis work area, without RotoLas: 115 mm, with RotoLas: 205 mm Maximum sheet thickness: - O2 structural steel: --- 20 mm - N2 stainless steel: --15 mm - N2 aluminum: ---- 15 mm - copper: - 6 mm - brass: ---- 6 mm - titanium: ---- 4 mm ACCURACY: - maximum spread of Ps max position: + -0.03 mm - difference in Pa position: + -0.05 mm - the smallest programmable distance dimension: 0.001 mm Control system: - CNC control: TRUMPF CNC based on the SINUMERIK 840D sl - main memory: PC 2 GB - hard drive: 2 x 160 GB - color monitor: TFT 17 - screen resolution: 1280 x 1024 px - USB connector Connection: -L49 type -Year of production 04-2015 - 4000 watt laser power - network: 400 V / 50 Hz - connected load: 42.0 kVA - control voltage: 24 ...