tire recycling used for sale

General SKU074S262 LocationBarneveld MakeSeitz TypeEFR 100.500 Mach.No.10857 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor13.2 KW Surface0.6 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface0,6m² Capacity572 Ltr Vessel sizesDia. 900x800 mm Plate sizesdia. 900 mm Vessel can be tiltedcheck Top connectionscheck Solids outletcheck With jacket(33+5 Ltr) Max. temperature165°C With stirrercheck Motor13,2 KW, 500 Volt (Ex) MaterialStainless steel 1.4571 (316Ti) Information Year of construction1975 Mounted on framecheck With switchcheck Floorspace2,2x1,5 m Total height3,1 m Weight3400 kg ATEX compatiblecheck Extra SpecificationsWith bottom heating Minerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConf ...

Description: (to be reviewed) Chager Electric semi stacker. Load capacity: 2000kg. Lift height:1600mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load ,/ ,no ,load)  ,(m ,/ ,s) 0.08/0.1. Driving ,speed ,(full ,load ,/ ,no ,load)  ,(km ,/ ,h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,735 x 800 x 2,100 mm, weight approx.: 500 kg

From a current recycling we offer you Mercedes-Benz Truck + Flatbed Tarpaulin Atego 1518L. Year of manufacture 2009 (registration date 18.11.2010) Mileage: 213,704.5 Condition: Gearbox damage Factory Price: Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 15326 Zeschdorf The sale is without warranty Subject to prior sale

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bul ...

Technical data single-deck ballistic separator for three separation fractions: Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in ...

For sale is an almost new bale opener line from a paper recycling plant for the production of ?fluff pulp? (long-fibre cellulose) from unmixed paper and cardboard production waste. The entire system was newly installed in 2021 and unfortunately never went into production. In 2024, the final decision was made to dismantle the entire system technology and sell parts of it. The resulting bale opener line only ran for approx. 2 hours in set-up mode after installation and never went into production. The system was designed for a throughput of 20 tonnes of fluff pulp per hour. Technical data on the used bale feed conveyor: Manufacturer Bollegraaf Recycling Solutions B.V. Type HBT 1400/1200 12500 - 0° (chain belt conveyor) Overhaul of the conveyor belt in 2021 Operating hours after overhaul approx. 2 hours Effective width 1200 mm Belt length 10,150 mm Drive power 3 kW, the belt speed of the m ...

Description: Attention: Due to sporadic loading, the operating hours may still change slightly and the forklift truck can only be collected at the end of the processing period. Attention: A truck with access ramp is required for transportation! Operating hours: 6366 h Mast data: Mast type: Standard Lifting height: 3500 mm Fork length: 2500 mm Dimensions: Overall height: 2950 mm Battery: HAWKER, 10 PZS 1400 80V (year of manufacture: 2009) Reversible seat: Electric Tires: Front: Size: 8.25 - 15 Condition: 70% Rear: Size: 8.25 - 15 Condition: 70% Attachments: Sideshift Fork positioner Fork spacing: 1800 mm (outside) Special equipment: 3rd valve 4th valve Working lights (front & rear) Full cab Twin tires loading capacity: 8 to, lifting height: 3,500 mm, length of forks: 2,500 mm, overall height: 2,950 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,800 x 2,950 ...

S/N: 2T400628 280 kW Volume: approx. 17.5 m³ Payload: 28 t. 300mm body elevation 2 new front tires

Description: All-wheel drive, 3-cylinder diesel engine, hydraulic PTO, fully functional, poor tires Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,150 mm, weight approx.: 600 kg

General SKU070A417 LocationBarneveld MakeStork Plaatwellerij Velsen No.5854 Year of construction1976, (Fluid stirrer built in 1999) Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor11 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2560 l, (netto 2000 l) Vessel sizesdia. 1380 x 1300 mm Dished bottomcheck Conical bottomcheck Dished top sidecheck Manholecheck hand hole dia. 200 mm Top connections(9x) Outletdia. 150 mm With jacketcheck (125 Ltr) Max. temperature150°C. With gate type stirrercheck make Fluid, type FKL-80 Motor11,0 kW, (400/690 Volt, 1460 rpm (Ex) Speed mixing shaft80 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace1,8 x 1,8 m Total height4,0 m Weight2700 kg ATEX compatiblecheckMinerals &  ...

Description: extendable platform Maximum platform length 2540mm non-marking tires safety rails rollover alarm platform height 5.8m forklift slots 230V battery model DC24V/AH Max slope 30% Manual emergency lowering system Platform swing gate Extended platform Foldable platform Multi-disc wet brake Manual brake release Pothole protection Non-marking tires AC power supply to platform Tilt alarm Buzzer Safety brackets Charging indicator Forklift pockets Diagnostic system Maintenance-free battery Dual flashing light Approx. Onsite Dimension. (l x w x h): 1,930 x 770 x 2,130 mm, weight approx.: 1,500 kg

Description: Set of complete winter wheels for current Mercedes Benz S-Class Mileage: approx. 3000 km Rims: RONAL aluminum rims 8.5 x 19 (Mercedes part number: A2234013100) Tires: HANKOOK Winter Concept EVO, 255 / 45 R19 104V M+S , Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 120 kg

Description: battery capacity 48v/65ah 4 pcs working capacity 6380m2/h collecting container 80 liters motor 700W max speed 10 km/h incl. 2 spare brushes tools flashing light LED front light non-slip tires water tank chain driven adjustable seat 5071 Approx. Onsite Dimension. (l x w x h): 1,600 x 1,250 x 1,300 mm, weight approx.: 396 kg

Description: INDUSTAR air recycling systems, type: 1N80A2, volt 220V weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,450 x 700 x 800 mm

Description: Chager Electric semi stacker. Load capacity: 2000kg. Lift height:1600mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load ,/ ,no ,load)  ,(m ,/ ,s) 0.08/0.1. Driving ,speed ,(full ,load ,/ ,no ,load)  ,(km ,/ ,h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,735 x 800 x 2,100 mm, weight approx.: 500 kg

Description: Load capacity:1000kg. Lift height:1600mm. Load center distance:500mm. Fork ,minimum ,clearance ,from ,the ,ground:40mm. Turning ,radius:1425mm. Minimum ,channel ,requirement:2305mm. Total ,length:1735mm. Total ,body ,width: 800mm. Fork ,width:320-1000mm. Fork ,size ,(hammered):110016050mm. Lifting ,speed ,(full ,load/no ,load) ,(m/s) 0.08/0.1. Driving ,speed ,(full ,load/no ,load) ,(km/h) 4.5/5.5. Falling speed(full load/no load) (m/s) 0.12/0.15. Tire:Nylon. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 1,735 x 800 x 2,100 mm, weight approx.: 500 kg

Key data: 90 mm

A brand-new extrusion recycling brand UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

A brand-new extrusion recycling brand UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Description: The Rösler RHBE 15/20 is an overhead conveyor blast machine that is suitable for the surface treatment of heavy or large-volume workpieces. , General information Type: RHBE 15/20 Machine number: 42825/08 With air extraction and material recycling Technical specifications Machine type: Overhead conveyor blast machine Turbines: Gamma 300G Hook load: 500 kg Door opening approx.: 1500 x 2000 mm workpiece dimensions L/W/H: 2000x1500 mm, charge weight: approx. 500 kg, total power requirement: 62 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 5,000 x 6,000 mm, weight approx.: 5,000 kg

Description: • Serial number 2046 • Standard tires 29.5 R25 • Bucket width 3480 mm • Standards bucket capacity 4.80 m³ • Steering type AL • Maximum Speed ​​35 km/h • Maximum pouring height 3100 mm • Lifting power 264 kN • CUMMINS QSM11 engine: displacement 10800 cc, power 250 KW • Working hours according to meter 16500  ,  ,IMPORTANT: , , The customer is responsible for all the loading related to the equipment. , Dimensions and weights are approximate. There is no documentation for this machine. Approx. Onsite Dimension. (l x w x h): 9,320 x 3,210 x 3,800 mm, weight approx.: 29,800 kg

Description: KN95 Mask Machine Automatic Production Line Produced by Foshan Tefude Automation Technology Co., Ltd, this KN95 mask machine automatic production line is composed of the following systems: Raw material feeding system Nose clip embossing welding system Ear loop welding machine Edge cutting system Waste recycling mechanism The production line can fully automatically complete the entire production process, transforming coil raw materials into completed mask products. The production line features a servo motion control system with a unique design that helps users improve production efficiency and reduce labor costs. It supports fully automatic operation for the following processes: Material feeding Nose wire insertion Embossing Ear loop welding Edge banding Finished product cutting Only one person is required to operate the line, achieving fully automated pro ...

Description: Unused 4WD ambient lighting twelve-light flashing light lighting motor rated engine power 75 kW engine code 4D32XG30 tire size 12-16.5NHS. Euro 5 engine with CE license Approx. Onsite Dimension. (l x w x h): 4,430 x 1,450 x 2,230 mm, weight approx.: 5,400 kg

I sell a line for the production of products from VPS and VPS (Extruder, VFM, Recycling) BU In prefabricated working order. made in China, 2014 There is an opportunity to demonstrate the line operability. Equipment: 1) PS extrusion line (DY-PSP 105/120) LONGKOU DEYLI MACHINERY CO., LTD. Capacity 200kg / h. Sheet width 1040 mm Max. Power consumption 125 kW. Overall dimensions V3m / W1.5m / D7m / D7m 2) Automatic Forming and Cutting Machine (DY-1040) LONGKOU DEYLI MACHINERY CO., LTD Max. Power consumption 156KW. Capacity up to 21.6 thousand pieces / h. W3m / W3.5m / D18m 3) Complex for recycling recycled polystyrene (Recycle machine) model DY-180 + 120/100 LONGKOU DEYLI MACHINERY CO., LTD (Crusher, Extruder, Grinder, Granulator) Productivity 90kg / h. Max. Power consumption 65KW. W3m / W2m / D5m 4) Dosing gas pump 4D-100/50 2.2 kW HANGZHOU ZHIJIANG PETROCHEMICAL CO.,  ...

Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...

Offer 7 Colour mixing bucket mixing kettle agitator tank Drais 300 l rollable Picture 1-5 (for e.g. Drais paint mixing unit (dissolver) type RN 218) ! Please no request for scrap recycling. The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparable systems): Manufacturer: Drais Description: Paint Mixing Bucket Mixing Kettle Agitator Tank Year of manufacture: probably 1985 Material: Sheet steel Inner diameter: 80 cm Height: 80 cm (over all) Weight: approx. 130 kg Number of pieces: 7 pieces with paint residues. Also sellable in parts for 350€/piece. Other assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h Image 6-12 The centrifuge was part of a wallpaper production plant. ...

Offer 1 mixing tank Böllhoff stainless steel 500l D=85 x165cm + level measurement photo 1-9 ! Please no request for scrap recycling. The plant is still located at the Halle Saale site. The sale is ex-works EXW. The system was used to store/mix paints for the paint shops. The facility is empty. with paint residues. It consists of the following technical components: Container Manufacturer: Böllhoff Verfahrenstechnik Type: Storage tank 500 liters Year of manufacture: verm. 1991/92 Dimensions: approx. D = 85 x 165 cm Dimensions container inside: D=80x108 with Level measurement probably VEGA 10702.20 Capacitive Probe Level Indicator Vega with Stainless steel connection to the container there is a separate lid with gear motor for an agitator, see photos. Surcharge 190 € Photo 10-12 Manufacturer of the geared motor: Greifenberger Antriebstechnik Markre ...

Offer 1 mixing container Böllhoff stainless steel 250 l D=85 x165cm with lid, Basic emptying + device for level measurement Fig. 1-5 ! Please no request for scrap recycling. Capacity: 250 l Diameter: approx. 60cm Height: approx. 90 cm The plant is still located at the Halle Saale site. The sale is ex-works EXW. The system was used for storing / mixing paints for the paint shops. The facility is empty. also on offer: 1 mixing tank Böllhoff stainless steel 500l D=85 x165cm + level measurement photo 6-10 VB 490 € also with lid and agitator motor + 190 € VB Image 11-14 and 7 Colour mixing bucket Agitator tank Drais 300 l steel very stable rollable VP 1990 € Photo 15-16 and further from the areas: Compressed air technology such as: -Kaeser Kompressor.SC 121 compressed air system, DC 75E dryer and.. Fig. 18 Refrigeration technology Chiller Chill ...