tipper used for sale

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

TIPPER TIE KDCM 90 CLIPPER, UNUSED AS NEW

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables

Has been used for small chubs of cheese.

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Optical push button, proximity switch -Type: IRD-4P-024-12 -Design: M30 -Ignition protection type EExd category: 2G/D -More robust and interference-resistant: proximity switches -Weight: 0.7 kg

Height=1.85 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 177 kg,

Clipping machine

Forklift tipping container, tipping container, tipping trough, forklift tipping, waste tipping container, scrap tipping container -Condition: New -with steel lid: made of galvanized sheet -Content: 0.8 m³ -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Corrosion protection: powder coated -Dimensions: L /W/H 1750/750/870 mm -Number: several available -Price: per pieces -Own weight: 200 kg

hydraulic tipping tank or tipping bucket Price: 800,-p.pcs. + VAT reclaimable: R928 hydraulic tipping trailer, tipping wagon MAFI hydraulically tiltable by means of a manual hydraulic pump. Load capacity 2000 kg Overall height 2000mm Inner body dimension Br.1900mm Flat 900mm top 1450mm 2 pieces are to be handed in Because they have been stored for years, they are partly rusty or the paint is peeling off. Otherwise very good technical. Condition in my opinion see also photo of the cylinders easily convertible as a tipping container on a forklift (has been done before) unscrew the chassis weld on 2square tubes for fork mounting Unscrew the manual hydraulic pump with quick couplings and adapt it to forklift hydraulics It is best to visit and try it out for yourself. I had several at one of them the chassis was removed and the holder for forklifts was welded on, intended for wo ...

A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz

Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Marpol PMTS10 – tandem tipper 13 t (new machine built in 2025) General data • Machine type: Tandem tipper • Manufacturer: Marpol Trailer • Model: PMTS10 • Year of construction: 2025 • Permissible Total weight: 13,500 kg • Net weight: approx. 3,500 kg • Payload: approx. 10,000 kg • Condition: New machine Technical equipment • Robust steel construction • Tandem landing gear for high stability • Hydraulic tipping function (rear tipper) • Large-volume body with high side walls • Tyres: 550/45-22.5 • Air brake system • Mechanical support leg • Lighting system with warning signs • Ladder for easy access to the trough • Tailgate oscillating / opening Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and powerful tandem tipper for agricultural transport work – ideal f ...

A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.

Fliegl TDK 140 – tandem three-way tipper (new machine built in 2025) General data • Engine type: three-way tipper • Manufacturer: Fliegl Agrartechnik GmbH • Model: TDK 140 • Year of construction: 2025 • Type: Tandem • Permissible Total weight: approx. 12,000 kg • Condition: New machine Technical equipment • Three-way tilt function • Tandem landing gear for high stability • Robust steel bridge • High side walls with attachment • Swinging tailgate • Hydraulic tipping system • Air brake system • Tyres: 15.0/70-18 • Lighting system and warning signs Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and versatile three-way tipper – ideal for agricultural transport work and high payloads. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions. ...

Pühringer 3818 – Three-way tipper 7 t (new machine) General data • Engine type: three-way tipper • Manufacturer: Pühringer • Model: 3818 • Year of construction: 2024 • Permissible Total weight: 7,000 kg • Net weight: approx. 1,340 kg • Payload: approx. 5,660 kg • Condition: New machine Technical equipment • V-frame made of torsion-free C-profile (210 / 75 / 6 mm) • Axle cross-section: 70 mm, track width: 1,500 mm • Brake system RFA, brake 300 × 80 • Inner bridge length: 3,780 mm • Bridge width inside: 1,750 mm • Overall length: 5,450 mm, total width: 1,910 mm • Platform height: approx. 1,030 mm • Steel bridge sheet 4 mm, folded from one piece • Base side wall 500 mm height • Swing wall at the rear with central locking • Grain pusher with lever operation • Removable corner posts at the rear, front side wall removabl ...

Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts

Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery

-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Mercedes-Benz LK 1320 Two-way tipper with Hiab 071 – H-registration – Year of construction 1993 • Manufacturer: Mercedes-Benz • Model: LK 1320 • Year of construction: 1993 • Engine: OM 366 LA, 6-cylinder turbodiesel • Power: 210 hp (154 kW) • Displacement: 5,958 cc • Mileage: 544,400 km • Transmission: Manual • Axle configuration: 4x2 • Construction: Two-way tipper • Loading crane: Hiab 071 • Fuel: Diesel • H approval available Equipment & work carried out: • New all 6 tires • Frame and subframe derusted, treated and painted • Skip completely reworked (sheet metal re-welded) • Girder of the body renewed • Well primed and painted in original colour • Cavities preserved • Crane primed and painted • Approx. 57 hydraulic hoses renewed • Hydraulic oil new • Hydraulic cylinder of the body resealed ...

Tipper semi-trailer equipped with a recent Fassi hydraulic crane, in perfect working order. Features: Trailer brand: WABCO Type: SK18/25 – tipper 1st registration: 1992 Last registration : 21/11/2024 Registration: Q-ATA-290 (Belgium) VIN: 17180-02 Air suspension Axles: 2 Masses: Empty weight: 9,500 kg MAW: 31,500 kg Payload: ±22.000 kg Crane: Brand: Fassi Model: F235A.2.23 E-Dynamic Year: 2025 Power supply: 24V Remote Control + Manual Controls Hydraulic Stabilizers Equipment: Steel body WABCO Brake System Storage box Mechanical Stands Status: Crane in excellent condition, perfect functioning (tested) Skip with traces of wear and oxidation Tyres in used condition Documents: Certificate of Registration (Part I & II) Identification Report Notes: Sold as is, without warranty Unverified technical inspection Tractor not included Highlights: Fassi 2025 crane (very recent) Remote control inc ...

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

Castle box tipping for boxes up to 12001200800

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

Boiler lifting tipper Diosna Model: HK 115 For planetary boilers Stainless steel 2 tipping heights DGUV V3 tested Y.O.M. 2010 Device mobile with fixed device Connection 400V, 16A-CEE plug Used machine inawhichandy and tested with 6 months warranty

-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile

Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts

Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971

Lifting tipper for spiral kneaders and lifting kneaders

small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm

Recording for lifting tippers for Diosna or Kemper lifting tipper models Dimensions: 120x110x125cm W/D/H

-Boiler lift tipper from Kemper model HK 150 -with stage for Kemper President Kessel -Height approx. 198cm -Tipping height approx. 195cm