tipper used for sale

Crate tipper for crates up to 120 x 100 cm floor dimensions, paint damage, no motor, no pump

crate tipper functional, for crates up to max 100120cm floor dimension

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts

Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts

Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide

used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm

A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz

Table lifting tipper approx. 600kg load capacity with dough slide shield Bottom 110cm Height approx. 130cm - Tested and cleaned

Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm

A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.

Lifting tipper suitable for Diosna boiler 240 Availability: immediately Shell size: Diosna 240 Instruction manual: available Test book: available

-Stage for lifting tipper -the platform is suitable for boilers from the Kemper Kronos 240A spiral mixer

- Lifting tipper for Diosna boiler - Manufacturer: Emil Kemper GmbH - Type: HK150 - suitable for spiral mixer boilers from Diosna SP 240 AD boilers

-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A

Clipse TipperTie 1 box 7825 1 box 6250, total 2 boxes

Sausage clipper TECHNOPACK TipperTie TCNI200 B, feeder, purchased approx. 1997 for EUR 4,601.63 net

Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010

Lifting tipper Diosna HK 224 Stepless electrical adjustment Suitable for tank car Diosna SP 240 A Connection 400V, 16A-CEE plug Used machine from the bakery

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

equipped with vibrating feeder; trough width approx. 600 mm; max. box width 1600 mm Auction-ID: A1-43573-80

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg

Equipped with leaf springing; ring towbar; Auction-ID: A1-40132-226

Equipped with ring tow bar; air suspension; air-braked; hydraulic selectable; twistlock change system; hydraulic valve; 40 m3 cargo box Auction-ID: A1-40132-137

8 ton tipper with 10 ton chassis equipped with recently replaced tires independent tandem axles equipped with drawbar suspension estimated own weight approximately 4000 kilos works properly equipped with hydraulic drawbar leg diameter towing eye 50mm Auction-ID: A1-40132-136

Equipped with: manual hydraulic tipping function on-board documents: certificate validated e705, certificate of conformity condition: unused Auction-ID: A3-43366-16343

200x 128x40 COC certificate not available Can be loaded with forklift Auction-ID: A3-43366-11122

3-cylinder diesel - PTO PTO - fast and low gear - hydraulic tipper - up to 50km/h - work light - towbar - starts, drives and brakes very smoothly ideel for horse pasture or agriculture Auction-ID: A3-43507-10703

for 240-litre bins galvanized Year of construction 2013 Payload: 150 kg Dimensions: (LxWxH): 1010 x 950 x 1045 mm Weight: 68 kg Auction-ID: A1-45292-45

Equipped with: towing eye, hydraulic connection, winch, lighting Auction-ID: A1-40133-190

Pühringer Tandem Dump Truck 7523 MT – 24 t – Year 2024 (New Machine) Manufacturer: Gebr. Pühringer GmbH Type: 7523 MT Year of construction: 2024 Permissible. Total weight: 24,000 kg Net weight: approx. 8,200 kg Payload: approx. 15,800 kg 40 km/h version, tandem chassis Dimensions & Volumes Tray length: 7,500 mm Tray width: 2,200 / 2,300 mm Tank height: 1,770 mm Skip volume: approx. 30 m³ Overall length: approx. 9,350 mm Total width: approx. 2,900 mm Skip Conical body made of fine-grained steel Bathtub base 5 mm, side walls 4 mm Hydraulic rear panel with rubber seal Automatically adjustable locking Tilt angle approx. 50°, 5-stage tilt cylinder Max. operating pressure 220 bar Chassis Torsion-free parallel frame Sprung tandem unit with axle compensation (Gigant) 2-wire air brake + ALB High-speed axles 40 km/h Hydraulic support leg double-acting ...

Equipped with: towing eye, jockey wheel, hydraulic connection, pneumatic tires, Auction-ID: A1-40133-192

Equipped with: lighting, support legs, Auction-ID: A1-40133-160

Fliegl TDK 140 – tandem three-way tipper (new machine built in 2025) General data • Engine type: three-way tipper • Manufacturer: Fliegl Agrartechnik GmbH • Model: TDK 140 • Year of construction: 2025 • Type: Tandem • Permissible Total weight: approx. 12,000 kg • Condition: New machine Technical equipment • Three-way tilt function • Tandem landing gear for high stability • Robust steel bridge • High side walls with attachment • Swinging tailgate • Hydraulic tipping system • Air brake system • Tyres: 15.0/70-18 • Lighting system and warning signs Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and versatile three-way tipper – ideal for agricultural transport work and high payloads. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions. ...

Marpol PMTS10 – tandem tipper 13 t (new machine built in 2025) General data • Machine type: Tandem tipper • Manufacturer: Marpol Trailer • Model: PMTS10 • Year of construction: 2025 • Permissible Total weight: 13,500 kg • Net weight: approx. 3,500 kg • Payload: approx. 10,000 kg • Condition: New machine Technical equipment • Robust steel construction • Tandem landing gear for high stability • Hydraulic tipping function (rear tipper) • Large-volume body with high side walls • Tyres: 550/45-22.5 • Air brake system • Mechanical support leg • Lighting system with warning signs • Ladder for easy access to the trough • Tailgate oscillating / opening Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and powerful tandem tipper for agricultural transport work – ideal f ...

Washing installation in non-working order, without charging cable. Auction-ID: A1-42012-133

Pühringer 3818 – Three-way tipper 7 t (new machine) General data • Engine type: three-way tipper • Manufacturer: Pühringer • Model: 3818 • Year of construction: 2024 • Permissible Total weight: 7,000 kg • Net weight: approx. 1,340 kg • Payload: approx. 5,660 kg • Condition: New machine Technical equipment • V-frame made of torsion-free C-profile (210 / 75 / 6 mm) • Axle cross-section: 70 mm, track width: 1,500 mm • Brake system RFA, brake 300 × 80 • Inner bridge length: 3,780 mm • Bridge width inside: 1,750 mm • Overall length: 5,450 mm, total width: 1,910 mm • Platform height: approx. 1,030 mm • Steel bridge sheet 4 mm, folded from one piece • Base side wall 500 mm height • Swing wall at the rear with central locking • Grain pusher with lever operation • Removable corner posts at the rear, front side wall removabl ...

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

N. 3 caissons of approximate dimensions: N°2 of dimensions: 1100 x 1700 x 1100 mm N°1 of dimensions: 1100 x 1500 x 1000 mm Without content Auction-ID: A7-45181-50

N. 2 caissons of approximate dimensions : 1100 x 1700 x 1100 mm Without content Auction-ID: A7-45181-47

Mercedes Sprinter 412 217.242km Tipper Double Cab, 5 seats Parking heater Ex Government Auction-ID: A3-43367-5719

Mercedes-Benz LK 1320 Two-way tipper with Hiab 071 – H-registration – Year of construction 1993 • Manufacturer: Mercedes-Benz • Model: LK 1320 • Year of construction: 1993 • Engine: OM 366 LA, 6-cylinder turbodiesel • Power: 210 hp (154 kW) • Displacement: 5,958 cc • Mileage: 544,400 km • Transmission: Manual • Axle configuration: 4x2 • Construction: Two-way tipper • Loading crane: Hiab 071 • Fuel: Diesel • H approval available Equipment & work carried out: • New all 6 tires • Frame and subframe derusted, treated and painted • Skip completely reworked (sheet metal re-welded) • Girder of the body renewed • Well primed and painted in original colour • Cavities preserved • Crane primed and painted • Approx. 57 hydraulic hoses renewed • Hydraulic oil new • Hydraulic cylinder of the body resealed ...

Assen are dish 400x200 Battery faulty 4 new tires available Auction-ID: A3-43367-11432

1981 Semi Lift Body 4.2mx2.1mx1m + extensions 0.4m Hydraulic door Tires 560/60R22.5 Hydraulic brakes Hydraulic Foot Grain trap Auction-ID: A3-43510-39058

Ifor Williams TT35 tipper (3500 kg), double axle, electric hydraulic tipping system with remote control. Including road plates (±3 tons), new battery, new clutch and jockey wheel. Year of manufacture 2019, Belgian papers available. Ideal for transporting machines and building materials. Working and immediately usable - small dent at the back of the loading platform (see photo) - Loading container dimensions: approx. 360 x 190 cm Auction-ID: A3-43367-10797