tipper tie used for sale

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables

Has been used for small chubs of cheese.

Optical push button, proximity switch -Type: IRD-4P-024-12 -Design: M30 -Ignition protection type EExd category: 2G/D -More robust and interference-resistant: proximity switches -Weight: 0.7 kg

Height=1.85 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 177 kg,

Clipping machine

Forklift tipping container, tipping container, tipping trough, forklift tipping, waste tipping container, scrap tipping container -Condition: New -with steel lid: made of galvanized sheet -Content: 0.8 m³ -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Corrosion protection: powder coated -Dimensions: L /W/H 1750/750/870 mm -Number: several available -Price: per pieces -Own weight: 200 kg

A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz

Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

Renault Maxity 3.0 DXi Tipper | 150 HP | Hydraulic Tipper | Driving license B | Margin vehicle This Renault Maxity 3.0 DXi is one of the most sought-after compact tipper trucks in the construction, garden and infrastructure sectors. Thanks to its robust truck chassis, hydraulic tipper and powerful 3.0 DXi diesel engine of 150 HP, this is an ideal working partner for intensive professional use. The compact construction and exceptionally small turning radius make this Maxity particularly suitable for working on narrow construction sites, city centers and hard-to-reach locations. Vehicle data • Renault Trucks Maxity • 3.0 DXi Diesel • 150 HP • 2,953 cc • First registration: 26/06/2009 • Mileage: 180,138 km • GVW: 3,500 kg • Driving license B • Margin vehicle • Chassis number: VF6SFTF2492100680 Documents • Belgian registration certificate available • Green approved � ...

General Description Three-way tipping tractor trailer manufactured by METAL . Designed for agricultural and industrial transport of bulk materials, crops and general cargo. The trailer features hydraulic tipping in three directions and a robust steel loading platform. Technical Details Manufacturer: METAL Machine type: Three-way tipping trailer Year: 2026 Condition: New, unused Gross vehicle weight: 5,000 kg Payload capacity: 4,000 kg Trailer weight: 1,000 kg Loading bed: 3,000 × 1,900 mm Side panel height: 400 mm Hydraulic three-way tipping system Hydraulic brakes Condition New, unused trailer. Equipped with hydraulic three-way tipping mechanism and hydraulic braking system, suitable for agricultural and industrial transport applications. Dimensions Loading bed: 3,000 × 1,900 mm Gross vehicle weight: 5,000 kg Auction-ID: A7-48975-6

Category: Tipper truck Manufacturer: Renault Model: Mascott Vehicle type: Double cab tipper truck Fuel: Diesel Transmission: Manual, 6-speed Drive configuration: 4x2 Engine power: 110 kW Engine displacement: 2,953 cm³ First registration: 30/10/2007 VIN: VF656ANA000001519 GVW: 6,500 kg Body: Steel tipper body with hydraulic tipping system Cab: Double cab (7 seats) Equipment: Air conditioning, power windows, radio, tachograph, hydraulic tipper controls in cab Remarks: Renault Mascott double cab tipper truck in used condition. Hydraulic tipping body operational (as shown). Vehicle equipped with rear work/tool storage compartment. Visible signs of normal wear and use. Own mass: Approx. 3,515 kg L x W x H: Approx. 6,300 × 2,150 × 2,750 mm Auction-ID: A7-48897-129

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

General Description Industrial self-tipping steel skip (BOZ) designed for collecting, handling and transporting waste, scrap and bulk materials. Suitable for forklift handling in production facilities, warehouses, workshops, construction sites and municipal operations. Technical Details Machine type: Self-tipping steel skip Year: 2018 Load capacity: 1,000 kg Empty weight: 142 kg Robust steel construction Automatic tipping mechanism Safety lock against accidental tipping/opening Forklift handling pockets Four swivel industrial wheels Suitable for metal scrap, wood waste, construction materials, production waste and municipal waste Condition Used industrial condition. The skip is described as well maintained and fully functional. Normal cosmetic wear consistent with industrial material-handling use may be present. Weight Empty weight: 142 kg Maximum load capacity: 1 ...

General Description Three-way tipping agricultural trailer manufactured by Lochmann , model RM 100 T . Tandem-axle trailer designed for agricultural and general bulk material transport, with hydraulic tipping capability to the left, right and rear. Technical Details Manufacturer: Lochmann Model: RM 100 T Machine type: Three-way tipping trailer Year: 2008 Serial number: 21044 Maximum permissible weight: 10,000 kg Axle configuration: Tandem axle Permissible axle load: 4,500 + 4,500 kg Permissible drawbar load: 1,080 kg Three-way tipping: Left, right and rear Slovenian registration documents included Front axle tyres: New Rear axle tyres: Approx. 80% remaining Condition Good used agricultural condition. The trailer is reported to be ready for work. New tyres are fitted on the front axle, while the rear tyres have approximately 80% remaining tread. Auction-ID: A7-49535 ...

A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.

Manufacturer: Schmitz Gotha Fahrzeugwerke GmbH Model: SKI 24/18.2 Machine type: 3-axle tipper semi-trailer VIN: W0921533430G22179 Body type: Steel tipper body Axles: 3 Suspension: Air suspension Landing gear: JOST, Type 55/1500-07B Landing gear capacity: 12 t lifting load / 25 t static load per leg Landing gear serial: 99013, BJ 1999 Tarp: Manual roll tarp fitted GVW: 35,000 kg GCW: 39,000 kg Axle load: 3 × 8,000 kg (35 t version) / 3 × 9,000 kg (39 t version) Kingpin load: 11,000 / 12,000 kg Remarks: Steel construction tipper semi-trailer with manual roll tarp, air suspension and JOST landing legs. Trailer shows normal wear, surface corrosion on chassis components and used loading body. Registration documents not available. Approx. own mass: 6,500 kg Auction-ID: A7-48897-134

Iveco EuroTrakker MP190E31W 4x4 tipper with spreader attachment • Manufacturer: Iveco • Model: EuroTrakker MP190E31W • Vehicle type: Tipper with spreader attachment • Year of manufacture / first registration: 01.10.2003 • Mileage: approx. 247,249 km • Fuel: Diesel • Engine power: 228 kW • Emission standard: Euro 4 • 4x4 all-wheel drive • Manual transmission • Leaf suspension front and rear • Original color Structure / Equipment: • Tipper body • Spreader attachment • All-wheel drive version • Suitable for transport and spreading work Condition / Notes: • Used vehicle • Mileage: approx. 247,249 km • Sale in existing condition Auction-ID: A1-48705-2209

Manufacturer: Mercedes-Benz Model: Unimog U400 Type: 405.102 Vehicle type: All-wheel drive tipper truck Manufacturer: DaimlerChrysler AG VIN: WDB4051021W201209 Body No.: 405.820-10-01695 Permissible total weight: 12,500 kg Permissible axle load 1: 6,700 kg Permissible axle load 2: 7,000 kg Drive configuration: 4x4 Cab: Day cab Body: 3-side tipper body Equipment: Front hitch plate, PTO controls, differential locks, off-road tyres, beacon, heated mirrors, work lights, air suspended driver's seat Remarks: Mercedes-Benz Unimog U400 utility truck with tipper body. Chassis and body manufactured by DaimlerChrysler AG. Suitable for municipal, construction and off-road applications. Normal signs of use and age visible. Approx. own mass: 7,200 kg Approx. dimensions (L x W x H): 5,700 × 2,350 × 3,000 mm Auction-ID: A7-48897-132

Lift tipper stage for DK 250 boiler Kemper HK 200 -Lift tipper stage for WP DK 250 boiler -the stage is for Kemper HK 200 lift era -Stage with boiler drive -Stage with boiler shearer

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK3 mount -Type: unfortunately without a type designation -Centering tip: Ø mm -Dimensions: Ø 52 x 162 mm -Weight: 0.7 kg

Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery

-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Mobile lifting tipper, built in 2018 Good, used condition, ready for immediate use. If you are interested, we will be happy to send you a video link of the tipper in action Price € 5,500 net

Machine type: Tipper semi-trailer Manufacturer: SCHMITZ GOTHA Fahrzeugwerke GmbH Model: SKI 24/8.2 Vehicle ID number: WSK00000001223220 Technical details: - 3-axle tipping semi-trailer - Steel tipper body - Approved gross weight: 39,000 kg - Length: approx. 9,997 mm - Width: approx. 2,550 mm Condition: - Used condition - Typical signs of use for age and application Remarks: - CE marked - Romanian registration present - Truck unit not included (only trailer) Own mass: approx. 8,200 kg Auction-ID: A7-48897-18

Electro-hydraulic tipping device Own battery for the tipping system Steel loading floor Fold-down plates Towbar coupling, overrun brake, handbrake and support wheel Lighting Baking size 335x180 Auction-ID: A1-47414-81

Robuste-Kaiser S3302B 2-axle steel tipper trailer – Gigant axles – 2008 Specifications: Brand: Robuste-Kaiser Type: S3302B Year of construction: 2008 First admission: 16-05-2008 Chassis number: VHRS3302B82C01555 Version: 2-axle steel tipper trailer Maximum permissible total weight: 33,000 kg Tare weight: approx. 6.740 kg Theoretical payload: approx. 26,260 kg Maximum bearing pressure: 13,000 kg Axles: 2x Gigant Maximum axle load: 2x 10,500 kg Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile on the first axle: approx. 40% Tyre profile second axle: approx. 70% Features: Steel body Hydraulic reverse tipping function Double steel rear doors 2 integrated grain chutes/unloading hatches, one left and one right Air, electrical and hydraulic connections Total dimensions (lxwxh)835 x 255 x 290 cm Internal dimensions ( ...

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

Castle box tipping for boxes up to 12001200800

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile

Lift tipper Kemper HK 150 height 330cm -for Kemper Kessel or with stage for Diosna Kessel -Height 330cm -400 volts

Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971

small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg