tipper tie used for sale

Lifting tipper tipping height 260cm stainless steel without control box External dimensions W: 150cm D: 130cm H: 460cm Tipping height : 260cm

Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg

Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg

Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Lifting tipper, BOKU, HE 80/2, 800 kg

Hubkneader, Fabr. Diosna Type D240 2 G

Hebekipper, Fabr. Kemper, Type HK 200 RL

Dough conveyor pen, Fabr. Shepherd

Dough conveyor pen, Diosna, type TFK 280

Tilting device, Fabr. W & P, Type Elevo

Hebekipper, Fabr. Nijsten BV

Lifting tipper Diosna HKV 224 Year of Make: 2006 Condition: repaired Suitable for Diosna vat trolley (spiral mixer) Tipping height approx. 185 cm Pliers lock Automatic boiler emptying  Pneumatic Dough Scraper

-Boiler lifter Kemper HK200 RD -for Werner & Pfleiderer DK250 kneading kettle -with boiler drive and boiler scraper

Equipped for boiler DIOSNA PSPV 160 Overall height Load capacity up to 600kg with pliers lock Tilt direction left with peeling with dough slide shield lower edge ______ with boiler proximity sensor

Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen

Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe  ...

22073569 Used and untested Auction-ID: A7-51314-412

equipped with loading platform size (LxWxH) 8.500x2.350x1.400 mm, 1+3rd axle forced steering, 2x K50 steering rod, 1x K80 ball coupling, load sensing controlled hydro pump with own hydraulic system, control box, air suspension chassis, Alliance 710/50R30.5, side reflector lamps, led work lights, loading platform lighting, grain pusher, hydraulically operated rear bumper, Auction-ID: A1-50597-65

Lider LDR3T black Hydraulic Tipper in Hardox for truck of the year 2025. The truck is equipped with a manual tarpaulin. The 2 axles in front are lift axles. All axles are from the SAF brand. CHASSIS number: NP9LDR3T0KS187001. For all details and documents, see photos. Auction-ID: A3-46109-4630

New unbraked manual tipper with extra row of aluminium from Kerenzo / dimensions : 262x158 / Comes with certificate of conformity and 2 years warranty / manual tipper with 3-stage piston, head rack, lashing eyes, KNOTT axles, galvanised chassis, number plate holder Auction-ID: A3-46109-6516

Unused tipper: standard hydraulic tipping and galvanized - removable plates. Auction-ID: A3-46111-17531

Unused tipper: standard hydraulic tipping and galvanized - removable plates. Auction-ID: A3-46111-17530

New Lider LDR3T Hydraulic Tipper for truck of the year 2024. The tipper is new. The tipper has 3 panels on each side, both left and right, that can be opened separately, at the back there is a French door. Documents available. Rear steering axle, front lift axle. Chassis number: NP9LDR3T5KR187003 For more info and details see photos and documents. Auction-ID: A3-46109-4627

Including attachment panels for loading and transporting maize. Auction-ID: A1-47396-101

Robuste-Kaiser S3302B 2-axle steel tipper trailer – Gigant axles – 2008 Specifications: Brand: Robuste-Kaiser Type: S3302B Year of construction: 2008 First admission: 16-05-2008 Chassis number: VHRS3302B82C01555 Version: 2-axle steel tipper trailer Maximum permissible total weight: 33,000 kg Tare weight: approx. 6.740 kg Theoretical payload: approx. 26,260 kg Maximum bearing pressure: 13,000 kg Axles: 2x Gigant Maximum axle load: 2x 10,500 kg Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile on the first axle: approx. 40% Tyre profile second axle: approx. 70% Features: Steel body Hydraulic reverse tipping function Double steel rear doors 2 integrated grain chutes/unloading hatches, one left and one right Air, electrical and hydraulic connections Total dimensions (lxwxh)835 x 255 x 290 cm Internal dimensions ( ...

Manufacturer: Mercedes-Benz Model: Unimog U400 Type: 405.102 Vehicle type: All-wheel drive tipper truck Manufacturer: DaimlerChrysler AG VIN: WDB4051021W201209 Body No.: 405.820-10-01695 Permissible total weight: 12,500 kg Permissible axle load 1: 6,700 kg Permissible axle load 2: 7,000 kg Drive configuration: 4x4 Cab: Day cab Body: 3-side tipper body Equipment: Front hitch plate, PTO controls, differential locks, off-road tyres, beacon, heated mirrors, work lights, air suspended driver's seat Remarks: Mercedes-Benz Unimog U400 utility truck with tipper body. Chassis and body manufactured by DaimlerChrysler AG. Suitable for municipal, construction and off-road applications. Normal signs of use and age visible. Approx. own mass: 7,200 kg Approx. dimensions (L x W x H): 5,700 × 2,350 × 3,000 mm Auction-ID: A1-50932-132

Machine type: Tipper semi-trailer Manufacturer: SCHMITZ GOTHA Fahrzeugwerke GmbH Model: SKI 24/8.2 Vehicle ID number: WSK00000001223220 Technical details: - 3-axle tipping semi-trailer - Steel tipper body - Approved gross weight: 39,000 kg - Length: approx. 9,997 mm - Width: approx. 2,550 mm Condition: - Used condition - Typical signs of use for age and application Remarks: - CE marked - Romanian registration present - Truck unit not included (only trailer) Own mass: approx. 8,200 kg Auction-ID: A1-50932-18

Chassis number: YD80022TP8JB02895 Auction-ID: A1-47396-113

3-axle chassis Features: Hydraulic tipping body Hydraulically operated tailgate Hydraulic support leg Force-steered front and rear axle Hydraulic drawbar suspension Air brakes K80 towbar Rear camera Steering rod available PTO driven hydraulic pump Particularities: Right front tire puncture Auction-ID: A1-47396-569

Category: Tipper truck Manufacturer: Renault Model: Mascott Vehicle type: Double cab tipper truck Fuel: Diesel Transmission: Manual, 6-speed Drive configuration: 4x2 Engine power: 110 kW Engine displacement: 2,953 cm³ First registration: 30/10/2007 VIN: VF656ANA000001519 GVW: 6,500 kg Body: Steel tipper body with hydraulic tipping system Cab: Double cab (7 seats) Equipment: Air conditioning, power windows, radio, tachograph, hydraulic tipper controls in cab Remarks: Renault Mascott double cab tipper truck in used condition. Hydraulic tipping body operational (as shown). Vehicle equipped with rear work/tool storage compartment. Visible signs of normal wear and use. Own mass: Approx. 3,515 kg L x W x H: Approx. 6,300 × 2,150 × 2,750 mm Auction-ID: A1-50932-129

Well working 3 side tipper with papers. Auction-ID: A3-46114-17129

HEITLING DSK 24 three-axle drawbar tipper trailer, year 2003. Machine no.: 961. Manufacturer: Heitling Fahrzeug- und Maschinenbautechnik GmbH & Co. KG, Melle, Germany. Identification plate indicates permissible gross weight 24,000 kg. Aluminium high-sided tipping body with tarpaulin, pneumatic braking system and drawbar coupling. Visible signs of age, use and surface corrosion. Tyres show wear. Offered in its current condition as shown in the photographs. Functionality, roadworthiness, completeness and technical specifications have not been independently verified. Auction-ID: A1-51215-12

Meiller MHKS 41/2-S 2-axle tipper trailer, built in 2004. Equipped with steel tipper and tandem axle chassis. GVW semi-trailer according to type plate 37,000 kg, with a maximum of 10,000 kg per axle. Superstructure with designation 24 T. Is in used condition with signs of wear and rust in accordance with age and use. Auction-ID: A3-46113-22099

MAN 18.284 tipper truck, year 1999. VIN: WMAM38ZZZYY051147. Registration no.: JLA-617. Odometer reading recorded during inspection: approx. 561,435 km. Fitted with HIAB 102-S-2 loader crane, year 1999, serial no. 2048. Permissible gross weight: 18,000 kg. Manual transmission (8+2). Used condition with age- and use-related wear; damaged seat upholstery, large hole/damage in left door trim, cracked bumper, scratches and corrosion visible. Offered in its current condition as shown in the photographs. Functionality, roadworthiness, mileage and completeness have not been independently verified. Auction-ID: A1-51215-1

New Lider LDR3T Red Hydraulic Tipper for truck of the year 2024. The tipper is new. The tipper has 1 panel on each side, both left and right that can be opened separately, at the back 1 large flap that can be opened. Documents available. Rear steering axle, front lift axle. Chassis number: NP9LDR3T1KR187001 For more info and details see photos and documents. Auction-ID: A3-46113-4628

ATLAS VON DER WEHL WEHL ZA 18 K two-axle drawbar tipper trailer, year 2007. Serial no.: W090072187LW03289. Permissible gross weight: 18,000 kg; permissible axle load: 9,000 kg per axle. High-sided tipping body, pneumatic braking system and drawbar coupling. Body and chassis show signs of use, weathering and surface corrosion. Offered in its current condition as shown in the photographs. Functionality, roadworthiness and completeness have not been independently verified. Auction-ID: A1-51215-13

Brand: Göweil Type: GHU 06/1200 DW Year: 2021 Serial Number: GHU12 07 006 21 013 Three-point tractor hitch Hydraulic cylinder allowing tipping of the bucket Opening rear panel Metal construction, blue color Condition: New Auction-ID: A3-46114-35367

MARTZ Tipper 360/2 C – 3.500 kg – Electric tipping (3-sides) Discover the MARTZ Tipper 360/2 C: a robust and versatile electrically operated tipper Tipper trailer that is ideal for both professional and private use. This powerful trailer offers a total weight of 3,500 kg, hydraulic electric tipping capability and a strong, durable construction that's made for intensive work. Key features Model: MARTZ Tipper 360/2 C – 3,500 kg Electric hydraulic tipping system: easy and fast tipping with electric control Robust construction: closed profile frame for extra strength and reliability Payload: approx. 2,480 kg, depending on configuration Dimensions of cargo space: approx. 3.64 m long x 1.70 m wide 2 axles: braked and stable when fully loaded Folding and removable side boards: flexible unloading and loading Steel floor and reinforced signs: suitable ...

Provided: according to the type plate: Volvo HYF 10-12, type approval T 006-FH, serial number 220365 and color code 2051. Axle 10x2 tipper (2 steered front axles, 2 driven axles and a tandem with two tag axles. Runs and does NOT work. Auction-ID: A1-47426-1760

MARTZ Tipper 300/2 C S – 2.7 T – Electric hydraulic tipper trailer Robust and versatile electric tipper for professional use The MARTZ Tipper 300/2 C S 2.7 T is a strong, practical and electrically operated tipper Tipper trailer that is ideal for contractors, gardeners, farmers and everyone else who wants to transport heavy material regularly and unload efficiently. This trailer combines strong construction, an electric hydraulic system and well thought-out functionality. Perfect for sand, soil, trash, building materials, and more. Technical specifications & features Model: MARTZ Tipper 300/2 C S – 2.7 T Permissible mass (DMC): 2,700 kg Payload: approx. 1,960 kg, variable depending on configuration Own weight: approx. 734 kg – 739 kg Dimensions of cargo space: approx. 3.03 m x 1.52 m (L × W) Frame: strong closed profile construction for  ...

Featured; Hydraulically driven; sieve chain by means of tubes; Camera; hydraulic brakes; Elevated; Loading height 390 Cm With current tires 580/70 R42 ( PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must name or export it on the spot with a third party, there are additional costs involved) Please note; Comes with smaller tires see photo. Auction-ID: A1-47397-2513

Hydraulic self-build tipper with chain floor Specifications: Branch driven chain floor Hydraulic tipping system Container: height 160 cm, width 217 cm, length 700 cm Joskin chassis 1 Joskin controlled drum shaft 1 DAF drum shaft Leaf spring suspension Tires: Alliance Flotation 331, 550/60-22.5 Features: Chain floor driven via PTO shaft Hydraulic control Particularities: The Joskin steering axle is currently not steered; The steering cylinder is disconnected. The axles are currently not driven; There are no drive shafts fitted. PLEASE NOTE no license plate There is a forklift and loading facility available Auction-ID: A1-47397-1176

GMC 3500 SL V8 5.7 pick-up / 3-sided dump truck – LPG – 1995 – automatic GMC 3500 commercial vehicle/pick-up from 1995, equipped with a 5.7 litre V8 engine, automatic transmission and Scattolini Bison 3-sided tipping body. Specifications: Brand: GMC Type: 3500 SL Year of construction: 1995 VIN/chassis number: 1GDHC34K7SE522701 Vehicle category: N2 Engine: 5.7 liter V8 Displacement: approx. 5,700 cc Power: 157 kW Transmission: automatic Fuel installation: LPG LPG tank: approx. 12 litres Odometer reading: Approx. 80,711 miles GVWR according to type plate: 4,536 kg Maximum axle load front: 1,760 kg Maximum rear axle load: 3,402 kg Tyre size according to type plate: LT225/75 R16 Features: Scattolini Bison superstructure Hydraulic 3-sided tipping bucket Aluminium side and rear panels Rear axle with double wheels Towbar Cab with bench seat Particulari ...