131,101 used machines on RESALE, but how to find them? Machine Search
-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016
KITTNER Lift-tilt device, type KHV-350/30L, for lifting and emptying 200 litre and 300 litre standard loading trolleys. Technical data: Tipping height: adjustable from 3,050 mm to 3,550 mm in 100 mm increments. Lifting weight: max. 300 kg Motor power : 0.75 KW Mains connection: 400V - 50 Hz Lifting principle: by means of roller chain Lifting speed: 5 m/min. Column height: 4,420 mm Total height: 4,480 mm, incl. 200 l trolley in tilted position! Degree of protection: IP 65 Execution: Lifting/tilting device in left-hand version, which means: The loading trolley is retracted into the lifting fork to the left of the mast at right angles to the slide axle! The mast, lifting fork and the fairing of the machine are completely made of stainless steel, material no. 1.4301, surfaces ground. The "slider" and the "slider axle" to accommodate the lifting fork are not made of stai ...
Weighted version of bucket Well maintained Auction-ID: A3-43529-19032
New equipment never used Auction-ID: A3-43529-36041
- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts
Lifting tipper Kemper HK150 - Boiler lifting tipper Kemper - Type: HK150 - 400 volts
Joskin 3565 tipper - 2024 - 3 axes - 12m Auction-ID: A3-43534-393026
Working condition, do what he has to do! Auction-ID: A3-43534-11944
Citroën jumper; 3-sided chickens; 7 persons; Auction-ID: A1-42018-148
Overall good start Auction-ID: A3-44486-11809
used lifting tipper HK 600 (table / tabletop device), suitable for Diosna 160 and 200 kneading machines, height 140 cm
Boiler lifting tipper Diosna HK 170 Bj: 2010 in used lifting tipper Diosna HK 170 is currently for sale. This machine is immediately available in our warehouse in Bielefeld. -Mobile on castors -380 volt plug -Tipping height approx. 120cm -Total height approx.: 155cm -External dimensions approx: 162cm deep and 120cm wide
Table lifting tipper approx. 600kg load capacity with dough slide shield Bottom 110cm Height approx. 130cm - Tested and cleaned
A used Kessel lifting tipper Diosna HK 224 is currently for sale. This lifting tipper is immediately available in our warehouse in Bielefeld. Boiler lifting tipper Diosna HK 224 - Boiler lifting tipper for Diosna spiral mixer SP 120 and SP 160 boiler - Dumping height approx. 200cm - Total height height approx. 295cm - Lifting tipper is mobile on castors - 380 Volt 50Hz
Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm
A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.
Lifting tipper suitable for Diosna boiler 240 Availability: immediately Shell size: Diosna 240 Instruction manual: available Test book: available
-Stage for lifting tipper -the platform is suitable for boilers from the Kemper Kronos 240A spiral mixer
- Lifting tipper for Diosna boiler - Manufacturer: Emil Kemper GmbH - Type: HK150 - suitable for spiral mixer boilers from Diosna SP 240 AD boilers
-Lifting tipper for Diosna spiral mixer boiler - Manufacturer: Diosna Dierks & Söhne GmbH - Type: HK170 - Lifting tipper is mobile on castors - for spiral mixer boilers from Diosna SPV160A and SP 160A
Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010
Lifting tipper Diosna HK 224 Stepless electrical adjustment Suitable for tank car Diosna SP 240 A Connection 400V, 16A-CEE plug Used machine from the bakery
Palamatic M7 Palpharmamove drum lifter tipper Stainless, Manual drum lifter and tipper, mobile, 250Kg safe working load
Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation
Forklift tipping containers, tipping containers, tipping skips, forklift skips, lift trucks -Tipping container: made of stainless steel -Manufacturer Bauer type: GU 300 9 -Content: approx. 0.3 m³ -with: holder for forklift tines -Max. Tine width: 205 x 70 mm -with: hydraulic tilting mechanism via the forklift battery 24 volts -Dimensions: 1880/680/H675 mm -Own weight: 208 kg
Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg
Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Manufacturer: holac, tilting device made of stainless steel -Use: for food or food industry with height-adjustable tilting function -Set tilting height: 2000 mm (can be changed to max. approx. 2500 mm for an additional charge) -Total height: 2960 mm -Individual components/dimensions: see photos -Transport dimensions: 2960/600/H1630 mm -Weight: 470 kg
Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.
Boiler lifter Kemper HK 200 for spiral mixer boiler from Kemper SP150AL - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200
Mobile lifting tipper, built in 2018 Good, used condition, ready for immediate use. If you are interested, we will be happy to send you a video link of the tipper in action Price € 5,500 net
Axel cofiguration: 4x4; Mileage: 580 000 km; Auction-ID: A7-46408-20
Marpol PMTS10 – tandem tipper 13 t (new machine built in 2025) General data • Machine type: Tandem tipper • Manufacturer: Marpol Trailer • Model: PMTS10 • Year of construction: 2025 • Permissible Total weight: 13,500 kg • Net weight: approx. 3,500 kg • Payload: approx. 10,000 kg • Condition: New machine Technical equipment • Robust steel construction • Tandem landing gear for high stability • Hydraulic tipping function (rear tipper) • Large-volume body with high side walls • Tyres: 550/45-22.5 • Air brake system • Mechanical support leg • Lighting system with warning signs • Ladder for easy access to the trough • Tailgate oscillating / opening Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and powerful tandem tipper for agricultural transport work – ideal f ...
Fliegl TDK 140 – tandem three-way tipper (new machine built in 2025) General data • Engine type: three-way tipper • Manufacturer: Fliegl Agrartechnik GmbH • Model: TDK 140 • Year of construction: 2025 • Type: Tandem • Permissible Total weight: approx. 12,000 kg • Condition: New machine Technical equipment • Three-way tilt function • Tandem landing gear for high stability • Robust steel bridge • High side walls with attachment • Swinging tailgate • Hydraulic tipping system • Air brake system • Tyres: 15.0/70-18 • Lighting system and warning signs Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and versatile three-way tipper – ideal for agricultural transport work and high payloads. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions. ...
Lifting tipper Diosna HKV 224 Year of Make: 2006 Condition: repaired Suitable for Diosna vat trolley (spiral mixer) Tipping height approx. 185 cm Pliers lock Automatic boiler emptying Pneumatic Dough Scraper
Equipped with hydraulic tailgate; ring towbar; feed pusher; tow bar; hydraulic brakes; Contents approx. 19.5 m3 Auction-ID: A1-40138-84
Equipped with ring tow bar; hydraulic tailgate; feed pusher; hydraulic support leg; 7-pin plug; hydraulic brakes; volume approx. 16.5 m3 Auction-ID: A1-40138-85
Equipped with ring tow bar; hydraulic tailgate; hydraulic brakes; volume approx. 18.8 m3; feed pusher; fall break sail; Auction-ID: A1-40138-86
Container size: 4500 x 2400 x 1100 mm. Equipped with PTO, PTO, braked, working. Auction-ID: A1-40138-291
Category: Tipper Truck Brand / Model: Iveco Daily (double cab) Configuration: 4x2, double cabin, tipper body Engine: Diesel engine Transmission: Manual gearbox Cabin: Double cab (crew cab) Seats: Multiple seats (crew configuration) Body Type: Steel tipper body Tipping System: Hydraulic tipper (rear tipping) Equipment: Roof beacon light Equipment: Warning road sign on roof Equipment: Side storage/tool compartment Remarks: Utility vehicle from INEO fleet Remarks: Suitable for construction and maintenance works Own mass: approx. 3,000 – 3,500 kg Auction-ID: A7-45990-68
Machine type: Tipper semi-trailer Manufacturer: SCHMITZ GOTHA Fahrzeugwerke GmbH Model: SKI 24/8.2 Vehicle ID number: WSK00000001223220 Technical details: - 3-axle tipping semi-trailer - Steel tipper body - Approved gross weight: 39,000 kg - Length: approx. 9,997 mm - Width: approx. 2,550 mm Condition: - Used condition - Typical signs of use for age and application Remarks: - CE marked - Romanian registration present - Truck unit not included (only trailer) Own mass: approx. 8,200 kg Auction-ID: A7-45990-18
The tipper is in good condition, working condition. With hydraulic tipping function. Auction-ID: A3-43534-34030
maximum number of results exceeded
please refine your search
150 € 
