tipper tie technopack used for sale

BIG backhoe bucket 55cm

2025 BIG backhoe bucket 80cm with MS03 Symblock attachment, Technical specifications:, - Weight: 191 kg, - Recording width: 80 cm, - Contents: 278 liters, - CAT 4 - suitable for 4.0 - 5.5 t excavators

2025 BIG backhoe bucket 70cm with OQ45 attachment, Technical specifications:, - Weight: 215kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

BIG backhoe bucket 60cm working width

BIG backhoe bucket 50 cm working width, with teeth, with quick-change mount, Dimensions of the mount:, Bolt diameter: 40 mm, Handle/mounting width: 210 mm, Wedge lock at the rear, suitable for 2.5-4 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

BIG backhoe bucket 65cm working width with Atlas attachment, with welded cutting blade and teeth, Dimensions of the mount:, Bolt diameter: 100 mm, Rear locking bolt: 40 mm, Handle/mounting width: 250 mm, Bolt spacing [Center - Center]: approx. 350 mm, suitable for 6-12 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

BIG backhoe bucket 45 cm working width with Arden attachment, with teeth, Wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 45 mm, Handle/mounting width: 225 mm, LxWxH: 47x70x62, suitable for 4-7 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

BIG backhoe bucket 30 cm working width, with 2 teeth outside, fixed bolted, Dimensions of the mount:, Bolt diameter: 40 mm, Handle/mounting width: 160 mm, Bolt spacing [Center - Center]: 240 mm, LxWxH: 30x75x78, suitable for 3-6 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

90 cm working width, 17 cm intake width

Paal / BIG backhoe bucket 38 cm working width, with cutting edge without teeth, with quick-change mount, with wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 40 mm, Handle/mounting width: 220 mm, LxWxH: 38x60x60, suitable for 3-6 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

15 cm working width, pick-up width 19.5 cm

BIG backhoe bucket 55 cm working width, with screwed on teeth, with quick-change mount, Wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 45 mm, Handle/mounting width: 250 mm, LxWxH: 55x60x70, suitable for 5-9 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

50 cm working width, with Lehnhoff MS01 holder

Original JCB, 30 cm mounting width

30 cm working width, with 2 teeth

50 cm working width, pick-up height center - center 30 cm, pick-up width 20 cm

30 cm working width, pick-up width 21 cm, pick-up height 24 cm

60 cm working width, with teeth

60 cm working width, 92 l volume

BIG backhoe bucket 60cm working width

BIG backhoe bucket 60cm working width

LxWxH: 50x55x60 cm

LxWxH: 40x46x45 cm,

Dimensions LxWxH: 60x40x40 cm,

90 cm width

NEW, 30 cm wide, with Lehnhoff MS01 Symlock mount, 39 kg net weight, suitable for 1.9 - 2.7 t excavators

BIG backhoe bucket 130 cm working width, with teeth (damaged), dimensions of the backhoe:, bolt diameter: 60 mm, handle/pick-up width: 270 mm, pick-up width for bone: 210 mm, bolt spacing [center - center]: 295 mm - optionally also 390 mm, suitable for 16-22 t excavators, further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

NEW, 40 cm wide, with MS01 Symlock mount, 47 kg net weight, suitable for 1.9 - 2.7 t excavators

Backhoe bucket with 80cm working width

Loading area length: 2.98 m, loading area width inside: 1.28 m, height of loading area inside: 50 cm, height of floor to platform 40 cm, gross vehicle weight 2000 kg, payload 1390 kg, 610 kg dead weight, total length 3750 mm

NEW, 50 cm width, with Martin M03 mount, 78 kg dead weight, suitable for 2.8 - 3.9 t excavators

: 414312067 voltage: 380 V frequency: 50 Hz rated capacity: 13 kVA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701

Used Tiede crack detection system in very good condition, industrial quality. System for longitudinal/transverse crack detection with manual or fully automatic demagnetization. Special accessories: UV super light, large area shower, blackout cabin.

With 50mm bolt, mounting width 190mm,, matching VTN - Nino de Martis, Martin (old version) recording

Pull-off trolley for 240cm deep pull-offs NEUWagen profile 40x40mm screwedExternal dimensions: W: 251cm D: 64cm H: 190cmInternal dimensions: W: 243cm D: 64cmSee pictureWe have various large pullers and pull-off trolleys in stockDetails see pictures

Pull-off trolley for 80cm deep pull-offs NEWagen profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cm10 CushionsInterior dimensions: W: 118cm D: 64cmThe trolley is suitable for 80cm deep and 60cm wide ovenSee pictureWe have various large pullers and pull-offs in stockDetails see pictures

Scraper for 194cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 207cm D: 64cm H: 180/190cm10 supportsInterior dimensions: W: 197cm D: 64cmSee pictureWe have various large pullers and pullers in stockDetails see pictures

Pull-off carriage for 60cm deep pull-offs NEUWagen profile 40x40mm screwedOuter dimensions: W: 101cm D: 84cm H: 180cm10 supportsInterior dimensions: W: 93cm D: 84cmThe trolley is suitable for 60cm deep and 80cm wide oven. See pictureWe have various large pullers and pullers in stockDetails see pictures

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Pullers Hooks  NEW!  ( 2 pieces )For 580 mm deep, 40 mm thick pullers7 screwsBracket bottom Made of stainless steel see picture for details 

ALU Puller with Cloth for 200 cm Deep Stoves NewProduct DescriptionCondition: NewMaterial Puller: AluminumSuitable for 200 cm Deep StovesWith Side FasteningDimensions Puller: Width 58 cm, Length 240 cm, Height 5.6 cmDimensions Cloth: Width 56 cm, Total Length 470 cmDetails see pictures.

Pullers 160cm deep for deck ovens NEUNew pullers / puller apparatus for deck ovensPullers made of ALUAspullers for 160cm deep ovenPuller dimensions : W: 194cm D: 58cm H: 4cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Attachment hook at the bottomideal for pizza, rolls, small bread, baquettes, croissant etc.

Pullers ALU for 160/180cm deep furnace NEWAductors made of ALUApullers for 160/180cm depth furnacePuller size : W: 200cm D: 58cmWe have various large pullers in stockDetails see picture 

Pullers with pullers for 160cm deep furnace NEWused pullers good condition stainless steel on rollers with 15 pieces  New ALU pullersTrolley Outer dimensions : W: 203cm D: 62cm H: 190cmPullers for 160cm deep ovenPuller dimensions : B: 194cm D: 58cm Height : 4cmthe price is for 15 pullers and trolleysWe have different large pullers in stockDetails see picture

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers for deck ovens 80cm deep NINEew pullers / pullers for deck ovensPullers made of ALUAspullers for 80cm deep ovenPuller dimensions : W: 115cm D: 58cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Fastening hook belowideal for pizza, rolls, small bread, baquettes, croissant etc. do we have various large pullers in stockDetails see picture 

with original HDM hot foil stamping device

Pullers with puller carriage for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 126cm D: 64cm H: 184cmInternal dimensions: W: 118cm D: 64cm10 pieces Pullers made of ALUAducts for 80cm deep ovenPuller dimensions: W: 115cm T: 58cmWe have various large pullers in stockDetails see picture 

with original HDM hot foil stamping device