tim used for sale

Siemens MRI Symphony TIM 1.5 T Upgrade TIM 2017 Helium Level 0%

MRI Siemens Magnetom Espree 1.5T TIM Technology Channels 18 Gradient Z Engine Manufactured 2013 Bore size [cm] 70 Zero Boil off system

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - 5 Spindeln - Spindel FI 40 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min - Abrichtwelle, unten max. Werkzeug FI 145 mm - Rechte Vertikalwelle max. Werkzeug FI 200 mm - Linke Vertikalwelle max. Werkzeug FI 200 mm - Dickenwelle, oben max. Werkzeug FI 200 mm - 2. untere Welle max. Werkzeug FI 200 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 5,5 kW 3. linke vertikal 5,5 kW 4. oben 7,5 kW 5. untern 7,5 kW - Motor Vorschub 3,0 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 37,6 kW - Aufgabetischlänge 2000 mm - Satz Vorschubwalzen FI 140 x 35 x 50 mm,   FI 140 x 35 x 20 mm, FI 140 x 35 x 16 mm - Druckluftanschluss max. 6 bar - Absaugstutzen 5 x 150 mm - Abmessungen L=3760, B=1730, H=1750 mm - Gewicht 4500 kg INKLUSIVE: - hart verchromte Tische - CE Norm, TÜV Rheinland - pneumati ...

- Hobelbreite 20 - 320 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5 - 25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. untere Welle min./max. Werkzeug FI 110 / 200 mm Spindelanordnung: 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtanschluss 54,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm - Druckluftanschluss 8 bar - Spannung 400 V / 50 Hz - Abmessungen L=4191, B=2144, H=2000 mm - Gewicht 6500 kg inklusive: - obere Welle elektrisch verstellbar mit Vorschubsystem und digitaler PLC Anzeige - hart v ...

Technische Daten: - Hobelbreite 20 - 200 mm - Hobelhöhe 8 - 125 mm - minimal Werkstücklänge 590 mm (einzeln) / 250 mm (bei Serie) - 5 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 8 - 33 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 180 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 180 mm - Dickenwelle, oben max. Werkzeug FI 108 - 180 mm - Zweite Welle, unten max. Werkzeug FI 108 - 200 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. linke vertikale 5,5 kW 4. oben 7,5 kW 5. unten 5,5 kW - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 34,25 kW - Aufgabetischlänge 1600 mm - Druckluftanschluss max. 6 bar - Absaugstutzen 5 x 120 mm - Abmessungen L=3500, B=1780, H=1750 mm - Gewicht 3600 kg inklusive: - hart verchromte Tische - CE Norm, TÜV Rheinland - m ...

- Hobelbreite 20 - 230 mm - Hobelhöhe 20 - 200 mm - Sägebreite 60 - 190 mm - max. 5 Sägeblätter pro Sägewelle - min. Sägedicke 5 mm - 6 Spindeln - Spindel Hobelwellen FI 40 mm - Spindel Sägewellen FI 50 mm - Drehzahl Hobelwellen 6000 U/min - Drehzahl Sägewellen 6000 U/min - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min - Abrichtwelle, unten max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 110 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 110 - 200 mm - Dickenwelle, oben max. Werkzeug FI 110 - 200 mm - Rechte Sägewelle max. Werkzeug FI 180 - 280 mm - Linke Sägewelle max. Werkzeug FI 180 - 280 mm Spindelfolge: 1. unten 11,0 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 11,0 kW 5. rechte Sägewelle 22,0 kW 6. linke Sägewelle 22,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 96,6 kW - Aufgabetischlänge 20 ...

- Hobelbreite 20 - 330 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. obere Welle min./max. Werkzeug FI 110 / 200 mm - untere Welle min. /max. Werkzeug FI 110 / 200 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 67,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - 5 Stück angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm, gehärtete Ausführung - Druckluftanschluss 8 bar - Absaugstutzen 2 x 150 mm, 4 x 180 mm - Spannung 400 V / 50 Hz - Abmessungen L=4854, B=2144, ...

Technische Daten: - Hobelbreite 20 - 200 mm - Hobelhöhe 8 - 125 mm - minimal Werkstücklänge 590 mm (einzeln) / 250 mm (bei Serie) - 6 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 8 - 33 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 180 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 180 mm - obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - zweite obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - zweite unter Horizontalwelle max. Werkzeug FI 108 - 200 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. linke vertikale 5,5 kW 4. oben 7,5 kW 5. zweite oben 5,5 kW 6. zweite unten 5,5 kW - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 39,75 kW - Aufgabetischlänge 1600 mm - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 120 mm - Abmessungen L=4000 ...

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - min. Werkstücklänge 720 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - zweite Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 200 mm - Dickenwelle, oben max. Werkzeug FI 108 - 180 mm - zweite untere Horizontalwelle max. Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. zweite rechte vertikal 7,5 kW 4. linke vertikal 7,5 kW 5. oben 7,5 kW 6. zweite untere 7,5 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 47,25 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 150 mm - Abmessungen L=4750, B=1860, H=1760 mm - Gew ...

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - min. Werkstücklänge 840 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 200 mm - Dickenwelle, oben max. Werkzeug FI 108 - 180 mm - zweite obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - zweite untere Horizontalwelle max. Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. linke vertikal 7,5 kW 4. oben 7,5 kW 5. zweite obere 7,5 kW 6. zweite untere 7,5 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 47,25 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 150 mm - Abmessungen L=4960, B=1900, H=1700 mm - Gewicht 5600 ...

Technische Daten: - Hobelbreite 30 - 260 mm - Hobelhöhe 10 - 200 mm - min. Werkstücklänge 840 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 50 mm - Drehzahl 6500 U/min - Vorschubgeschwindigkeit stufenlos 8 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 - 140 mm - Rechte Vertikalwelle max. Werkzeug FI 118 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 118 - 200 mm - obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - zweite obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - untere Horizontalwelle max. Werkzeug FI 118 - 250 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 11,0 kW 5. zweite obere 11,0 kW 6. untere 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung Vorschub 0,75 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,18 kW - Gesamtleistung 71,68 kW - Drucklu ...

Technische Daten: - Hobelbreite 50 - 330 mm - Hobelhöhe 8 - 250 mm - min. Werkstücklänge 700 mm (einzeln) / 300 (bei Serie) - stufenloser Vorschub 8-36 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere horizontale Welle min. /max. Werkzeug FI 140 mm - rechte vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - linke vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - obere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 2. obere horizontale Welle min./max. Werkzeug FI 140 / 230 mm - untere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 15,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung Vorschub 1,5 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,37 kW - Gesamtanschluss 84 kW - Vorschub ...

Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - min. Werkstücklänge 720 mm (einzeln) / 280 mm (bei Serie) - 7 Spindeln - Spindel FI 40 mm - Drehzahl 6800 U/min - Vorschubgeschwindigkeit stufenlos 6 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 mm - Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - zweite Rechte Vertikalwelle max. Werkzeug FI 108 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 108 - 200 mm - obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - zweite obere Horizontalwelle max. Werkzeug FI 108 - 180 mm - untere Horizontalwelle max. Werkzeug FI 108 - 230 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 5,5 kW 3. zweite rechte vertikal 7,5 kW 4. linke vertikal 7,5 kW 5. oben 7,5 kW 6. zweite obere 7,5 kW 7. untere 7,5 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 54,75 kW - Druckluftanschluss max. 6 ba ...

-Feed roller at the top -example-link feeder roller REX HOMS 860 price EUR 2700.- -Spare part for REX planing machine, expert and fast

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

Waste Baler BTS-MF500LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 500 kg - Compact and low design with only 2249 mm height - Suitable for baling of cardboard, film, clothes, cans, PET, Canister, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:50 Ton Motor: 11 kW 32 Amp Power suppl: 380-400 V (3 Phase) Machine size (H x W x D): 2249 x 2041 x 1350 mm Tr ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

MRI, Siemens Magnetom TRIO ( A TIM SYSTEM ) - Year of construction 2007 - including HF cabin of the company Schwarz - Plant is under Siemens maintenance contract - still in clinical operation - very well maintained facility with many accessories

Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Accessories:, Pneumatic workpiece clamping,, Windows 7 PC + QCM 8.0, software VIALOGIC TIM Teach-In-Mode,, software package 1 (cylindrical tools sharp edge, corner and full radius),, software package 2 ( conical-spiral tools sharp edge, corner and full radius),, Software VIALOGIC Viascan,, QCM Network,, LightControlDevice,, Glass scales on the linear axes., Traverse X-axis: 200 mm, Y-axis travel: 350 mm, Z-axis travel: 250 mm, A-axis speed: 60 rpm, Workpiece holder: ISO 50, Workpiece diameter: 3 - 200 mm, Workpiece length: Max. 300 mm, Workpiece weight: max. 40 kg, Connected load: approx. ...

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

This is a portioning plant for the bakery industry the dough hopper has a capacity of 180kg (teflon-coated) the system consists entirely of stainless steel at the same time is still a height conveyor attached to the teigli, but the system is also variably available according to your wishes and ideas whether other dough size or other, or no conveying height

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Very ADDAX underground cable machine / New The cut range of 10 - 160 mm PVC, rubber, iron and lead cables can be processed. Drive: 15 hp/11 KW Weight: 1.3 T New ADDAX subterranian cable stripper can be used for cables with diameter of 10-160 mm out of pvc, rubber,iron and lead. Drive: 11 kw / 15 hp Weight: 1.3t Every time we have 12 different cable strippers on stock. New and second hand machines

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

AD 2360 / 22 Bottomer, two valve units, bottom patch unit, patch printing 2 colors, complete refurbished, newer opening station, delivery time 3 month with setting the order

Temperature Controllers Equipped with a Self-optimizing microprocess controller (+/-1 C) for temperatures up to 140 C. Powerful pumps (pressure up to 6 bar) guarantee a high flow of process water and thus a short preheating time and because of it's direct cooling design, a high cooling capacity. Year 2006

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Ladies and gentlemen, follow an offer for a field hospital. The equipment depends on the wishes of the buyer of the field hospital. Of course, containers can also be delivered instead of tents. Below and in the attached annexes, please refer to the corresponding configuration and components of a possible field hospital. They are welcome to adapt to their needs, accept or omit things. The field hospital for 100 people shown here. The equipment is basically optional. We are also happy to supply only the pure hardware component. We can also assist with the construction and operation at any time. If this product is of interest to you, we will be happy to provide you with a complete and detailed offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreement ...

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

We offer from stock zzügl. Packaging+Freight to: Timing belt 113 teeth a 42,-/piece Cylinder head LDW1204/1204T/1404 net 840,-/piece all prices to the tax mail= info@miw-zeven.de

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...

Control station Gema / ITW until the relocation of the plant 2009 the plant was maintained by ITW Gema, all units in the top state. 6 times unit static pistols 100 KV 2 times unit lifting device control for up to 4 pistols. Steering position and images to be followed by lifting devices as well as automatic pistols. If you have any questions, please, to the technology. In operation, handling .etc. of course I like to advise . Please send a short info to my AB with tel. I will contact you immediately . Mfg. Pradler Machine Service 05242 / 43186 Mobile 0171 / 4513691 email: info@pradler.com

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...