tim used for sale

SUB: FOR SALE... NEW & RECON ORIGINAL PARTS L 48/60 AT STOCK HAVE A GDY SIR; WE'VE MANY NEW OR RECON SPARE PARTS OF MAN L 48/60 AT OUR STOCK. PLS FIND DTLS AT BELOW. MOST OF THEM SUPLIED FROM YOU IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. 1 NEW CYLINDER LINER X 1105003-7519 1 YOU 2 RECON EXHAUST VALVE 1140441 D 449216 1 3 RECON EXHAUST VALVE 11408100120560 1 5 RECON EXHAUST VALVE 114071002050560 1 6 RECON EXHAUST VALVE 1140441144 1 7 RECON EXHAUST VALVE 114071000960560 1 8 RECON EXHAUST VALVE 114061002560560 1 9 RECON EXHAUST VALVE 114091003053060 1 10 RECON EXHAUST VALVE 114071009960560 1 11 RECON EXHAUST VALVE 114091000500560 1 12 RECON EXHAUST VALVE 114071000950560 1 13 RECON EXHAUST VALVE 11406102640560 1 14 RECON EXHAUST VALVE 11408100120560 1 15 RECON EXHAUST VALVE 61953016796 1 16 RECON EXHAUST VALVE 6051953004859 1 17 RECON INLET VALVE 01 ...

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Industrial replacement monitor 12.1 TFT monitor High-quality anti reflective glass incl. cable with 15-pin. D-Sub-Plug Technical Data: TFT-LCD Monitor 12.1 inch Display/Resolution 800 x 600 Pixels Brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display range 246 x 185 mm External power supply 12V Operating power unit -10c +60 celectricity consumption max. 30 W connection D-Sub 15-pol, 2 row OSD control Brightness, contrast control, auto-adjustment phase position, clock, instalment speech, reset connection cable, power supply The Front panel is not included in the offer. The installation is carried out on the existing front panel. 24 Month Warranty! More monitors, new and used on request! ; New!

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

ndustrie replacement monitor 12.1 TFT monitor Matching for lid machines with dialog 11 control High quality anti reflective glass Technical data: TFT-LCD Monitor 12.1 inch display/exposure 800 x 600 pixels brightness 40 0 cd/m2 Contrast ratio 500:1 response time 8 ms frequency 60 hz display range 246 x 185 mm External power supply 12V operating power system -10c +60c power consumption max. 30 W connection D-Sub 9pol. 2 consecutive OSD control Brightness, contrast adjustment, auto adjustment phase position, clock, voice installation, reset accessory: cable, power supply 24 months warranty! More monitors, new and used on request!; New

NEW TUEV acceptance behind them. Sell the machine because we don't need it at the time. If you have questions we are gladly available.

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Our product range includes not only new mixer 3-75,000 litre mixing volume, but also machine, which partially or completely be overhauled. In addition we offer transmissions, swing arms, Auger gladly at any time use and Generalüberholten different mixer types (including V-mix, NAUTA - and Vriecomischer) with a comprehensive range of services and spare parts available.

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Continuous mixers, previously used for the polymer admixture INDAG DLM K-2. Stainless steel, great condition 3 kW, 1450 1/min, 16 bar, built in 2005. With replacement mechanical seal, once a new time needed. Operating instructions available.

Showroom machine Powder spray booth powder booth powder plant of Romer KPO-3 1 internal dimensions (mm) width x height x depth 2800 x 2100 x 1000 2 external dimensions of mm width x height x depth 2800 x 2300 x 1600 3 frequency 50 Hz 60 Hz 4 drive electric 5 mains voltage V 400 V + N + E 6 nominal output KW 2.2 7 filter polyester 8 Panel v/h/r/l right 9 filter surface M ² 22.5 10 filter holder quickly 11 filter cleaning pneumatic 12 filter cleaning type-automatic, time interval can be set. -Manually 13 fans type aluminum 14 fans number St. 1 15 doors St. / type no 16 air consumption m 3 /h 10.200 17 outdoor paint RAL 1013 18 warranty 12 months

Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957

Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.

; Delivery time is about 10 weeks

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER

Spiral mixer DIOSNA SP 120-Überholt-used machine in the obsolete State - for 120 kg of dough or 75 kg of flour - reconditioned - with Stubabdeckung - 2 time clocks - boiler and mixing arm stainless - incl. guarantee the machine can by arrangement like visited and tested. Transport: EUR 80-

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

Acoustic enclosures Aerzener Delta in different sizes in stock, short delivery time.

Fully automatic shrink machine for containers BVM 6030 W banding machine About 3000 mm length infeed conveyor- Adding links Shrink tunnel SC 6030 with steel net mesh bracelet band-width 600 mm - clearance of 300 mm heated zone 1000 mm All in very good condition The machine can be visited at any time! Individual prices: Products - 4.800,00 Shrink tunnels - 2800.00 Infeed conveyor - 1.500,00

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Various conveyor belts of various lengths from 3m to 25m; Width 800mm and 1400mm; Drive power from 1.5 kW to 5.5 kW. Very well maintained, has been little used. Extremely stable built. Visits by appointment at any time.

5 piece round timber sorting fields, make JUMPER, almost like new condition. Current series, built in 2007! Suitable for round timber length 3,0-5,0 m. With electric output er motor 3.0 kW. Reverse loading ready.

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Annealing oven box furnace KU500 all4-PCB from the Switzerland The investment is for the production of thin-film - photovoltaic modules CIS / CIGS (module size 1250 x 650) bildungsportal. The task of the furnace is to anneal coated substrates in the production process. Cycle time 50 sec (first stage) Year of manufacture 2010 300 running BRA, mint already properly decomposed, which is not the original on the images, which has eight dry fan New price 306.000,-net

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

Mfc.: OBRAM Type: ZP43 M00 Built: 2003 Revamped 2007 Capacity: 12 000 l/h Holding time / heat treatment of the product: 30 seconds Temperature: 96 - 98 ° C Washing CIP Controls on the controller: Siemens S7 Heating exchange with plates Overview Service unit: March 2014.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004

American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns

PRECISION SCALE Ser. No.: WF131434 Readability (d) : 0,01 g Weighing range (max) : 3000 g Reproducibility : 0.01 g Linearity : ±0,03 g Smallest part wight for piece counting : 20 mg Reference quantities at piece counting: 10, 20, 50, 100, 200 Weighing Units: g, ct, Ib, oz, d, ozt, dwt, mo, tl h, tl c, tl t, t, bt, n Recommended adjustment weight, not added (class): 3000 g (F1) Warm-up time: 2 hours Stabilization time (typical): 3 sec Operating temperature : + 5° C + 35° C Humidity of air: max. 80 % (not condensing)

480 m2 steel construction stage used, good condition, see pictures Length approx. 21 m Width approx. 23 m Height lower edge 2.45 m Height top edge 2.9 m fastened with screws and nut Grid distances adjustable in length without shelf shelves Negotiation price: € 14,000.00 net from stock Disassembled and loaded from stock Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers Changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure company clearances Operational resolutions Fast- flexibl ...

Rated power up to 300 kg/h engine power Drive motor 0.37 (0.5) Washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1280 mm width 870 mm He he 1350 mm 65 mm width 350 mm Band length 4900 mm application width 240 mm Application shoehe 0-50 (infinite) mm Weight 350 kg Material 1.4301 / AISI 304 Juice yield up to 75% Band speed 2 m/min Contact time 1 min Water consumption for cleaning 2 l/ min Connection for waste water 48.3mm Connection for juice drain 1 High juice drain 420 mm High sewage drain 120 mm Hoehe marc ejection 700 mm ; New machine - best condition

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated power up to 3000 kg/h engine power Drive motor 2.2 (3.0) Washing machine motor 0.37 (0.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3035 mm width 2080 mm He he 1690 mm Width 1200 mm Band length 9950 mm application width 900 mm application shoehe 0-65 (5 steps) mm Weight 2500 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.5-3.5 m/min Contact time 2-11 min Water consumption for Cleaning 6 l/min Connection for waste water 76.1mm Connection for juice drain 11.2 High-gasning 400 mm High-speed wastewater drain 250 mm Hoehe marc ejection 880 mm Supplied high-pressure cleaner, compressor ; New machine - best condition

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated power up to 1500 kg/h engine power drive motor 0.55 (0.75) washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2538 mm width 1463 mm He 1460 mm mm width 650 mm Band length 8120 mm application width 450 mm application shoehe 0-50 (infinite) mm Weight 1060 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.9 - 1.8 m/min Contact time 1.9 - 3.8 min Water consumption for cleaning 3 l/min Connection for waste water 75mm Connection for juice drain 2 High juice drain 400 mm Hoehe wastewater drain 210 mm Hoehe marc ejection 840 mm Supplied high pressure cleaner, compressor ; New machine - best condition

Used Puff Pastry Make-Up Line TROMP, Type: 180.01.011 -Reconditioned- - Table length overall: 7.900 mm - Conveyor belt width: 650 mm - complete with guillotine and filling depositor Condition: Very Good, reconditioned The line is in a very good condition and ready for operation. Inspection and test run are possible at any time.

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Rated power: up to 7000 kg/h Electrical connection: 3 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions dimensions: Laenge: 4 435 mm Width: 2 250 mm Height: 2 160 mm output or drop-in height: 1 430 mm Width: 1 100 mm 320 - 870 mm Application shoehe (infinitely adjustable): 10 - 50 mm Weight: 3 400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for Cleaning: 20 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 40 He juice drain: 200 mm High sewage drain: 100 mm Hoehe Marce ejection: 800 mm usable for core and stone fruit Scope of delivery: high-pressure cleaner, compressor Incl. New machine - top condition

FOR SALE. USED 320 CYLINDER HEADS. FIRST TIME OF THE ENGINE. THESE HAVE NOT BEEN RECONDITIONED BEFORE AND ARE READY TO BE RECONDITIONED AND USED AGAIN. NO CRACKS, NO DAMAGE. IN VERY GOOD CONDITION AND CLEAN AND PRESSURE TESTED. WE HAVE 40 PCS. PRICE ON REQUEST. EX-WORKS UK WE ALSO HAVE 320 BLOCK, CRANK SHAFT-2 PCS IN EXCELLENT CONDITION AND MANY OTHER USED 320 PARTS FROM DISMANTLED/DECOMMISSIONED ENGINES.