129,286 used machines on RESALE, but how to find them? Machine Search
With Holz-her feeder. Tiltable shaft. Auction-ID: A1-47074-11
SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment
Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control
Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left
HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg
With feeder. On a pallet. Auction-ID: A1-47074-20
Maximum tool size 180mm. Inhibited. Auction-ID: A1-47074-5
Groen DEE 420 tilting kettle Serial: 67305 Stainless, floor standing tilting kettle, capacity 75L, manual tilt discharge, jacketed, 3Ph
used
1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW
Technical details: - Milling spindle swivels and height adjustable! - Adjustment displays of the milling spindle analogue on the handwheel - Spindle can be swivelled from -10° to +45° - Diameter of milling spindle (assembled): 30 mm - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm (mechanical changeover) - Display of spindle speed via indicator lamps - Mechanical spindle lock - Spindle right-left rotation - Milling mandrel mount: MK55 - Machine table length: 1,140 mm (without extension) - Max. table width: 840 mm - Working depth (up to cutter shaft): 430 mm -Table height: approx. 830 mm - 2 x adjustable milling stops (height: 150 mm, length: 430 mm (plus wooden extension) - Max. diameter table opening: 230 mm (3 rings) - 2 x suction nozzles, diameter 120 mm per nozzle Engine data: - Two-stage speed - Manual star-delta circuit - Voltage: 380 V - Current ...
Is about model of 100cm width. Auction-ID: A3-43543-13021
Is about model of 120cm width. Auction-ID: A3-43543-13022
Max. Capacity: 99 litres, internal pan dimensions: 1020x540x210mm, connected load: 14.4kW, 3 NPE AC 400V, fuse protection: 3x 32A, sensible heat output: 6480W, latent: 5760W, length: 1600mm, width: 850mm, height: 700mm, weight: 245kg. With appliance switch, limit switch, temperature controller, safety temperature limiter, control lamps, SUPRA contact heating element, contactor, fixed electrical connection and IPX5. On-site inspection is possible.
Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...
Key data: 1 mm, 10 kW, 30 mm
Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table ...
Key data: 3 mm, 10 kW, 30 mm
Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...
Key data: 3 mm, 8 kW, 30 mm
Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change ...
Key data: 3 mm, 6 kW, 30 mm
Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...
Key data: 3 mm, 10 kW, 3 mm
MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm
Key data: 2 mm, 8 kW, 40 mm
Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis ...
Key data: 1000 mm, 40 mm
SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment
Spindle moulder with tilting shaft SCM mod. T110I - CE -Volt. 400/50 - Matr. AB/118120 - Year 1998
Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.
Cup filler, make Schutten, year of manufacture 2005 with lifting and tilting device, - 2-lane rotary conveyor with matching lifting and tilting device for standard trolley 200 l, - Suitable for filling chunky masses (e.g. delicatessen salads), pasty products (e.g. mayonnaise, spreads), - Stations: unstacking cups, filling, sealing, ejecting, - Sealing foil from roll, sealing tool with integrated cutter, - Format set for butchers cups (112 x 86 cm), - Filling capacity: 15 – 35 cycles per minute (corresponds to 30 – 70 cups), power: approx. 19 bars / min (= 38 cups)
Tilting frying pan 150L with stirrer, - Agitator with Teflon wiper, - Heating with thermal oil 240 C°, - Temperature query heating thermal oil PT 100, - Lid operation manually, - Cover seal profile seal, - Control: Aditec microprocessor controller, Electrical values, - Power: 26 KW Voltage: 400V Frequency: 50 HZ Phase: 3 N/PE TN-S
MARTIN Swivel milling machine, type T 23, built in 1978, swivel range: -5 to 45°, spindle diameter 30mm, speeds: 4, height adjustment: handwheel, motor: 6 kW, table dimensions 1,100 x 940 mm, swivel adjustment handwheel
REX F-59S Built in 1988 Motor power: 6 / 8 kW (rated current: 16A) Swivel range from -10° to +45° Speeds: 3rd / 4.5 / 6th / 9,000 rpm Milling spindle: 30 + 40 mm Height and swivel adjustment by handwheel Selector switch for left/right rotation Control panel at the top (at eye level) Socket for feed rate Engine brake incl. 2 table extensions Table size: 97.5 x 88 cm Suction nozzle 2 x 120 mm Weight approx. 800 kg Transport dimensions W x D x H (approx. dimensions): W: 110 cm T: 132 cm H: 179 cm
The hydraulic automatic tilting kettle with a capacity of 600 liters is designed for professional use in the food processing industry. The hydraulic tilting system ensures easy and safe emptying of the contents. The double jacket with thermal oil provides even heat distribution and precise temperature control, making it suitable for cooking, mixing, and thermal processing of soups, sauces, jams, creams, and ready meals. Manufactured from high-quality stainless steel, it ensures durability, hygiene, and long service life. Technical specifications: Hydraulic automatic tilting kettle Manufacturer: Sind With cover Double jacket- thermal oil Volume: 600 liters Power: 30.7kW Made out of stainless steel Machine dimensions in cm: Length: 205 Width: 158 Height: 123
Fermentation belt carrier tilting planks with trolley32 pieces tipping planks with trolleyManufacturer: RingoplastType: Baked goods CombiDimensions: 580x390x48 mmInner dimensions: 567x377x45 mmMaterial: PolypropyleneWeight: 950 gWe have several in stockShipping costs please ask for details see picture
Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg
roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, solid design -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 108 mm -Axle distance: 150 mm -Conveyor length: approx. 2800 mm -Tilt function: hydraulic, approx. 20° -Total dimensions: 3100/2300/H2000 mm -Weight: 1390 kg
roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, without hydraulic unit -Drive motor: kW rpm -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 110 mm -Axle distance: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Total dimensions: 3100/2300/H2000 mm -Weight: 1180 kg
Metos Viking Combi 300EM Mixing Kettle 2015, Stainless, 300L cooking kettle, electrically heated, 41.5Kw, variable speed and temperature controls, guarded lid, tilt to discharge, 3Ph
Electrolux Smart Variomix 200L Boiling pan 2017, Stainless, 200L cooking kettle, electrically heated, 39.7Kw, max temp 127'c, with spare mixing arm and spare parts, 3Ph
Electrolux Smart Variomix 300L Boiling pan 2021, Stainless, 300L cooking kettle, electrically heated, 52Kw, max temp 127'c, with spare mixing arm and box of spare parts, 3Ph
Excellent condition - Fully operational - Loading / Transport possible! Motor rating: 5 / 6 kW Rotational speeds: 3/4/5/ 6/ 8/ 10,000 rpm Spindle stroke : 150 mm The machine has the following optional accessories Digital display in the controller of the infeed fence jaw position Motorized fence positioning via the machine's electronic system Motorized table opening for tools with diameters from 70 mm up to 250 mm Motorized feed support Table extension ( 2400mm) with extensible workpiece support length 3000 mm, 700 mm extendable to the front Integral fence jaws swinging support for fence. The fence will be lifted via handwheel from the table Wegoma feeder Variomatic 4N, 4 rolls - feed speed 0,5 - 24 m/min
Excellent condition - Fully operational - Loading / Transport possible! Motor power: 7.50 KW 5 rotation speeds: 3000/4500/6000/7000/10000 rpm MK5 interchangeable spindle, spindle diameter 50 mm, spindle with reverse rotation, useful spindle length approx. 140 mm Table size 1200 x 730 mm with 2 lateral tables of dimensions 700 x 420 mm Maximum tool diameter under table approx. 320 mm FLEX fence with automatic movement Glazing bead unit, motor power 2.60 KW EASY TOUCH 7" mobile control panel With 4 rollers feeder SCM FEED 44
Excellent condition - Fully operational - Loading / Transport possible! Saw blade inner diameter 25 mm Saw blade diameter max. 200 mm, min. 180 mm Distance saw blade center to table 115 to 200 mm Saw blade thickness max 30 mm Cutting height with 200 mm saw blade 50 mm Suction nozzle diameter 80 mm Main motor 2.2 kW Table depth 730 mm Table length 1,200 mm Spindle speed 5,000
spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;
spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manuell; read out spindle height: digital; read out tilting: digital; read out fence: digital; spindle diameter: 30 mm; speed: 3000, 4500, 6000, 9000; power consuption: 5 / 6 kW; motor brake: Ja, automatisch; suction connection: 2 x 120mm; machine length: 2500mm; machine width: 1400mm; weight: 1100kg;
Swivel spindle milling machine KÖLLE F45 with feed and integral stop very good condition, the machine comes from a small model making company and has been used only a little everything works perfectly all bearings and guides are OK, the machine has a very smooth running Year of construction 1992 on the milling fence a stop jaw can be adjusted in depth, with fine adjustment and scale, so that dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, this allows very precise and fast adjustments, the milling depth can be read off on a digital display with spindle lock by lever the machine has the control panel at eye level with AIGNER integral stop the chips can be discharged very well, with 2 suction nozzles 125 and 100mm with 30mm spindle, which can be s ...
spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine
Excellent condition - Fully operational - Loading / Transport possible! Table dimensions 1255 x 900 mm, table height 900 mm, motor power 6 kW, speeds 3000/4500/6000/9000 rpm, tool holder SK 40, double-sided electromotive spindle adjustment, electromotive table opening switching 72/105/160/225/305 mm, spindle diameter 30 mm, integral fence AIGNER, extendable workpiece support, spindle height adjustment 150 mm, 4-roll-feed unit MAGGI STEFF 2044, 8 feed rates 4 to 66 m/min, Electromotive Integral Fence Adjustment, Double-sided Table Extensions 580 mm plus Swivelling Stop per Side.
Tilting device for steel containers, with approx. 20 containers
Aigner guides. Feeder.round router protection. Auction-ID: A1-47074-1
Technical details Manufacturer: Kogast Type: Industrial tilting bratt pan / cooking kettle Construction: Stainless steel Configuration: - Rectangular cooking basin - Manual wheel-operated tilting system - Counterbalanced stainless steel lid - Dual thermostatic control knobs - Front drain/outlet valve - Freestanding commercial unit Estimated internal dimensions: - Length: Approx. 700 mm - Width: Approx. 600 mm - Depth: Approx. 200–220 mm Estimated usable volume: Approx. 80–100 liters Application: - Industrial kitchens - Catering production - Bakery filling preparation - Sauce and soup cooking - Meat cooking - Institutional food service Dimensions: - Length: Approx. 1100 mm - Width: Approx. 900 mm - Height: Approx. 950 mm Weight: Approx. 180 kg Condition: Used Auction-ID: A7-47053-33
maximum number of results exceeded
please refine your search
100 € 
