tilting table used for sale

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg

Description Brand Cleveland Model TKET-6T ID 7296 Status Active Price 1.500 € + VAT Year of manufacture 1999 Location Oradea (RO) Twin steam jacketed tilting kettle, Cleveland TKET-6T manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. The temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate), Operating temperature range from 145° - 260°F (63°C - 127°C), control panel includes: LED indicator for heat cycle, LED indicator for low water, power ON/OFF switch, adjustable temperature control dial. Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone", safety valve for pressures greater ...

According to the PDF prospectus!

Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...

Tilt tray sorter 2x 80 targets – second-hand - : Price on request! Manufacturer: Kosan Crisplant a/s Type: S2000-750 Year of construction: 1993 Sorter: Total length of the entire loop: 168.75m Number of changeovers: 80 Number of erecting units: 2 set Number of linear motors: 7 Number of bowls: 225 Shell pitch: 750mm Shell width: 700mm Speed: 1.5m/s 2 Scanners 160 slides 4 Infiltrations Number of sorter targets: approx. 2 x 2 x 40 targets (sorted to the right and left) Linus based controls Smallest size: approx. A4 x 8cm Maximum size: approx. boxes of 60 x 60 x 80cm Sorting capacity approx. 6 - 10,000 / hour Condition: good Available from. ca. Mid-2024 (possibly earlier on request) Location. Area Berlin More photos, videos and plans on request!

Plastic planks / tilting planks 60x40cm approx. 1000 pieces in stock

Tilting planks with trolley Stainless steel 17 tilting planks Dimensions: 80,5x60cm W/D The car has 18 editions Dimensions of the car: Height:177cm Width: 87cm Depth: 61cm

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

Use for containers [cm] 140 x 90 x ok. 130 cm Price: on request Power supply: 380V Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

MARTIN T26 swivel spindle milling machine very well maintained, in good facilities: Swivel angle: from +/-45.5 degrees, electrically adjustable according to LED display Digital dimension correction when the height is adjusted, the correction factor for the swivel angle is displayed in the upper display Height adjustment: stroke 150mm, electrically adjustable according to LED display Speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, Quick-change system: Dornfix quick-change spindle with torque wrench electr. Pneum. Spindle blocking Comfort stop with mechanical indicators for overall adjustment and inlet jaw individually T2600 CENTREX protection T2601 control panel can be swivelled above T2621 table extension with extendable workpiece support T2635 Swivel device for milling stop T2628 guide strips in anodized design Type 1376 tenon cutting  ...

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

spindle tilting: yes-5 bis +45°; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: manual; read out height: digital; read out tilting: digital; read out fence: scala; spindle diameter: 30 mm; speeds: 1500, 3000, 4500, 6000, 9000, 12000 U / min; motor power: 5 / 6 kW; motor brake: yes, automatically; suction connection: 2 x 120 mm; machine length: 1200 mm; machine width: 1400 mm; weight: ca. 950 kg;

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manual; altitude display: digital; swivel angel display: digital; tilting fence display: Scala; spindle diameter: 30 mm; speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000; power consuption: 7,5 kW; motor brake: yes, automatic; suction connection: 2 x 120mm; machine length: 2400mm; maschine width: 1400mm; weight: 1100kg;

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Martin Type: T25 M-No.: V 245411 Year of construction: 1997 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: eye level with digital display, stop position with digital display Spindle height 150 mm electromotive heights adjustment with digital readout Inclined position: -5° - +45° electromotive angle adjustment with digital readout Feed: 4 roll feed device Optional: Stop: Aigner Integral stop Milling protection cover: Aigner Centrex

Martin T25 swivel spindle cutter with 5 axis control Brand: Martin Type: T25 M-No.: V232232 Year of construction: 1996 Engine power: 7.5 / 9.5 kW or 10 / 13 HP, 2 speeds Dalander engine Swivel milling spindle: -5° - +45° Milling mandrel ø30 mm Spindle holder: ISO quick change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: NC control at eye level with LCD screen Spindle height NC-controlled electromotive angle adjustment (program controlled or manual operation) Inclination -5° - +45° NC-controlled electromotive spindle height adjustment (program controlled or manual operation) Stops: NC-controlled electromotive of the two stops adjustment to the milling mandrel (program controlled or manual operation) NC-controlled ele ...

Motor: 7.5/9.5kW, control panel at eye level, spindle ø30, table extension and spreadfront, console feed, feed jaw with digital readout Optional: Haffner 4 Roller Feeder

Code: N0133 Brand: FIMAL Model: TX 160/L Spindle moulder with tilting shaft +/- 45° - motor hp 10 Optional: Automatic star delta starting Electric shaft height display Table extensions

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T grooves: 3 -rotatable and swiveling -fits for Deckel Mikron WMW and other milling machines -Weight: 95 kg

Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device -Tilting device for: tilting container -Load capacity: 1500 kg -Recording: forklift -Dimensions: 1270/930/H700 mm -Own weight: 80 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt with a small trough -Conveyor belt can be tilted sideways pneumatically -Drive motor: 0.37 kW 93 rpm -Band speed: 32 m/min -Belt width: 290 mm -Drive roller: Ø 100 mm -Conveying length: 3000 mm -Belt height: 800 mm -Number: 1x belt conveyor belts available -Price: per piece -Transport dimensions: 3000/700/H800 mm -Weight: 210 kg / piece

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt with a small trough -Conveyor belt can be pneumatically tilted sideways in both directions -Drive motor: 0.37 kW 93 rpm -Band speed: 32 m/min -Belt width: 300 mm -Drive roller: Ø 100 mm -Conveying length: 2500 mm -Roller conveyor length: 500 mm -Belt height: 980 mm -Number: 1x belt conveyor belts available -Price: per piece -Transport dimensions: 3060/700/H980 mm -Weight: 222 kg/piece

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

spindle tilting: Ja -5 bis 45°; height adjustment: elektrisch; tilting adjustment: elektrisch; fence adjustment: manuell; read out spindle height: -; read out tilting: Scala; read out fence: Scala; spindle diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg;

General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU349U857 LocationBarneveld MakeHywema TypeKV 12-B No.69397/01 Year of construction2021/12 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight1000kg Hydraulic drivecheck With hydraulic unitcheck Motor2,2kw, 220/380Volt Information Mounted on framecheck With switchcheck With switchgearcheck Weight1350 kg CEcheck Floorspace2,1x2 m Total height3m Extra SpecificationsThe Hywema is equipped with a vibration motor and a dosing lock.  : Vibration motor data: Brand: Venanzetti vibrazion Type: VV05N/2 C1 Voltage: 230/400 Volt Power: 0.17 kW Equipped with CE and EX  : Dosing lock data: Brand: Baumgarten Type: 200aL VA Motor: 0.25 kW, 230/400 Volt Lock speed: 15 rpm Outlet diameter: 200 mm Equipped with CE Lifting/tilting machinesHywemaConveying systems > Lifting/tilting machine ...

General SKU277T631 LocationBarneveld MakeGlatt TypeELD 60 Year of construction2016 Main Features MaterialStainless steel Motor0.75 KW Height2700 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4571 (316Ti) Lifting machinecheck Lifting + tilting machinecheck Max. weight200 kg Lifting height2700 mm Hydraulic drivecheck With hydraulic unitcheck (Ex) Motor0,75 kW 230/400 Volt Information Mounted on framecheck With switchcheck Floorspace2x0,6 m CEcheck Total height3,9 m Weight900 kg ATEX compatiblecheckLifting/tilting machinesGlattConveying systems > Lifting/tilting machinesBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU025C042 LocationBarneveld MakeServo-Lift GmbH / Pharmatech TypePharmalift Hoist No.E-4398 A Year of construction1992 Main Features MaterialStainless steel Motor1.5 KW Height2550 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machineSlewable IBC hoist (1x) Max. weight150 KG Lifting height695-2550mm Hydraulic drivecheck With hydraulic unitcheck Motor1,5 KW, 230/400 Volt Information With switchgearcheck Floorspace1,8x1,0 M Total height2,9 M Extra Specifications- With 1x IBC (316), Dim. 500x500x400mm, Conical bottom 350mm Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...

General SKU236T270 LocationBarneveld MakeBohle TypeHS300 No.0641536001/2 Year of construction2006 Main Features MaterialStainless steel Height2500 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight200 kg Lifting height2,5 m Mechanical drivecheck Motor0,55 kW 400 Volt Information Mounted on framecheck With switchcheck Weight750 kg Floorspace1,9x0,8 m Total height2,5 m Extra Specificationsmaximum height: 2.5 m rotatable on bottom plate with PIAB transport vacuum system, SN: 17949 (SKU: 236T264) Lifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please v ...

General SKU244K215 LocationBarneveld MakeFördertechnik AG Münchenstein TypeFT-150 S, Slewable No.96310-130/17079 Year of construction1996 Main Features MaterialStainless steel Height2400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting + tilting machine(1x) Max. weight150 KG Lifting height± 2400mm Mechanical drivecheck Motor400 Volt (Ex) Suitable for product sizes± 800x800mm Information With switchgearcheck Floorspace2,0x1,2 M Total height3,1 M Weight500 KG ATEX compatiblecheckLifting/tilting machinesFoerdertechnikConveying systems > Lifting/tilting machinesBrand > Foerdertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnev ...

General SKU900WP043 LocationGermany MakeMeiller (DE) TypeHubstapler Mach.No.135271 Specified Features - Lifting/tilting machine MaterialMild steel Information Year of construction2010 Mounted on wheelscheck Weight180 KG Extra Specificationslifting capacity 100 kgLifting/tilting machinesMeillerConveying systems > Lifting/tilting machinesBrand > Meiller What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Robust swivel milling machine 245 medio from Panhans - Hokubema swivels from 45 to +45 degrees in very good equipment and rolling table Ideal machine for window manufacturers due to roller table Positioning control in 2 axes for spindle height and spindle inclination Reinforced drive motor 7.5kW with automatic motor brake and stepless speed control from 1500 to 10,000 rpm R/L barrel Swivel angle from -45 to +45 degrees, electrically adjustable Height adjustment electrically adjustable HSK-80 Rapid shaft change spindle with 30mm diameter, change to other diameters is possible quickly Comfort stop with digital display of the total adjustment, adjustment by hand crank Stop with comfort lifting device hydraulically swivel away (for bow milling work, etc.) Zeromaster Reference Device for Milling Height Adjustment Table extension on the right with extendable workpiece support Tab ...

Key data: 1000 mm, 4 kW, 35 mm

SPECIFICATIONS: Workbench mm: 1000 x 1000 with 4-roller Europa drive with variator Installed capacity KW: 4.0 Diameter of spindle mm: 35 Tilting spindle shaft Max. vertical stroke mm: 210 Tilt: 0° - 45°

SECOND-HAND SPINDLE MOULDER WITH TILTING SHAFT SCM MOD. TI120 - CE RULES - tenonig carriage model TL - spindle shaft diam. 40 mm. - motor Hp 7,5 - year 2008

Classifieds Home & Garden DIY Your Ad Visits: 17 Wishlist: 0 Ends on: 26.05.2024 Edit Reserve Lengthen Delete Print a sales sign Highlight Ad Duration Price Push up Get new attention! Your ad will look like a new ad. one-time 3,95 € Highlight: Up to 2x more visibility! Your ad will be highlighted in color. 7 days 4,95 € Up to 5x more visibility! Your ad will be pushed up every day for a week. 7 days € 16.95 Up to 10x more visibility! Your ad is at the top of the list! 7 days € 19.95 Gallery: Up to 15x more visibility! Your ad will appear on the home page! 10 days € 49.95 All prices incl. VAT. Swivel Spindle Milling Machine FELDER F38 Rotary Milling Machine Table Milling Machine Feed in Langenbach Swivel Spindle Milling Machine FELDER F38 Swivel Milling Machine Table Milling Machine Feed €5,652 Pick-up only 85416 Bavaria  ...

General SKU394U1144 LocationBarneveld MakeServolift TypeHF No.13261 Year of construction2014 Main Features MaterialStainless steel Motor1.5 KW Height2775 mm Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight290 kg Lifting height2775 mm Hydraulic drivecheck Motor1,5 kW, 400Volt. MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Information With switchcheck Weight850 kg CEcheck Floorspace1,86x0,94 m Total height3,6 m ATEX compatiblecheck Extra SpecificationsBarrel lifter,barrel size dia. 603mm,lift height min 440 mm, max 2775 mm,barrel cap. 300 Ltr.Swing angle 180°Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

Description: Technical details: Load capacity 300 kg, volume 250 L, pouring edge height 600 mm, dimensions L 850 x W 750 x H 840 mm, additional information: Tiltable, box-shaped trough with handle. Base frame with drive-in pockets. Oil and watertight welded. Protection against unintentional slipping and tipping. - Load capacity: 300 kg, - Supplied with 1 swivel and 2 fixed castors, - Volume 250 liters, - Dump edge height: 600 mm, - Dimensions: L 850 x W 750 x H 840 mm, - Weight: 54 kg weight approx.: 75 kg, Approx. Onsite Dimension. (l x w x h): 850 x 750 x 840 mm

Description: Forklift slots Approx. Onsite Dimension. (l x w x h): 1,600 x 1,200 x 1,000 mm, weight approx.: 200 kg

Proofing belt carrier tilting planks with trolley32 pieces Tilting planks with trolleyManufacturer : RingoplastType : Baked goods CombiExternal dimensions : 580x390x48 mmInternal dimensions : 567x377x45 mmMaterial : PolypropyleneWeight : 950 gWe have several in stockShipping costs please inquire about details see picture

Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg

Key data: 2540 mm, 35 mm

SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed

Long tables The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Tilting Lifter San Cassiano ER 2 Year of construction: 2006 Condition: checked & cleaned Suitable for San Cassiano bowls Motorized bowl discharge Incl. Mesh fence with safety switch