tie bar size used for sale

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

TIPPER TIE KDCM 90 CLIPPER, UNUSED AS NEW

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

A versatile casing stuffing/clipping system. Suitable for applications such as: sausage, deli meats and ham; fresh ground meats; whole muscle meats; netted meats; non-meat sausage, hams, and deli meats; fresh ground fish; surimi/fish sausage paste; raw/frozen/refrigerated pet food; pumpable cheese; soup; sauce; ground fruits and vegetables

Has been used for small chubs of cheese.

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Height=1.85 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 177 kg,

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

Used Palletizer TIEMME PT42 up to 3000 bph Introduction to the Used Palletizer TIEMME PT42 up to 3000 bph This specific palletizer exemplifies advanced mechanization in the bottling industry. TIEMME Automazioni manufactured this model and introduced it in 2000. Subsequently, they overhauled it significantly in 2015 and upgraded its electrical panel in 2023, demonstrating a commitment to maintaining the equipment with modern technologies. Capacity and Versatility This palletizer achieves a capacity of 3000 bottles per hour (BPH), marking remarkable efficiency for medium-scale operations. Moreover, it handles formats ranging from 200×200 mm to 400×400 mm, adjustable through the configuration of the gripping jaws. There are 3 typologies of grippers included in the machine that can adapt it to various typologies of formats. Thus, it showcases the machine’s versatility to meet ...

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

Technical data for the Tiefensteg: Manufacturer: SSI Schaefer The scope of delivery includes: 01x Tiefensteg, used Material colour: grey Total length: approx. 1,108 mm f. column depth: approx. 1,100 mm Clear span: approx. 999 mm Truss support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / pcs.: approx. 8,020 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Pressure gauge, flow meter, measurement and control technology, liquid flow meter -Manufacturer: Siegel and Tiefenbach, flow meters -Measuring range: 1-6 l/min -Dimensions: 224/58/H110 mm -Weight: 1.0 kg

Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm

Used Tiede crack detection system in very good condition, industrial quality. System for longitudinal/transverse crack detection with manual or fully automatic demagnetization. Special accessories: UV super light, large area shower, blackout cabin.

-Blower hammer mill with 45 kW -Rotor should be prepared

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

1) Drill pipe BTA Ø 43 x 2700 - 20 pcs; 2) Drill pipe BTA Ø 26 x 2700 - 40 pcs; 3) Drill pipe BTA Ø 22 x 2700 - 24 pcs;

Welding device, welding device -Transfer in current condition as seen -pneumatic: exciting -Dimensions: 210/170/H370 mm -Weight: 11.3 kg

diameter: 0 mm workpiece length: 0 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crack testing device for large series of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg : Packing: ca. 10 Lademeter m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Drilling, Milling, Tapping for heatexchanger bases and plates   - Swivable A Axis + 25 to - 15 Degrees - Filtration and Coolant system 1000 L - Cip conveyor 2000 x 1200 height out put - Milling tool changer Tower Station 20 positions - Capacity ELB Drilling 3 - 35 mm  - Capacity Milling 250 ccm/Min   - Feed rates all axis 15.000 mm/Min X-Y-W-Z - Cutting hours ca 15.000 - Large tooling package

Working width 150 cm, with teeth, with Verachtert CW30/40 mount

NEW, - 40 cm working width, - 105 kg dead weight, - suitable for 8.5 - 9 t excavator, with Lehnhoff MS08 mount,, photos are only for example photos!, Hardox cutting edge, bucket holder hook, many other sizes and buckets available on order!

30 cm working width, pick-up width 21 cm, pick-up height 24 cm

60 cm working width, 92 l volume

Dimensions LxWxH: 60x40x40 cm,

: 414312067 voltage: 380 V frequency: 50 Hz rated capacity: 13 kVA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701

Working width 35 cm, with Martin M10 mount

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 167 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 130/16/H5 mm -Weight: 0.005 kg/piece

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 82 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 91/16/H5 mm -Weight: 0.005 kg/piece

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

FRUSCH – Tie Rod Threading Machine General data: Manufacturer: Frusch Machine type: Tie rod threading machine Maximum diameter: 125 mm Weight: approx. 1000 kg Dimensions (L x W x H): approx. 1800 x 1250 x 1900 mm Description: Industrial threading machine designed for processing tie rods and similar cylindrical components. The machine allows precise and efficient threading operations, making it suitable for heavy-duty industrial applications. Auction-ID: A7-45351-23

The depth bar is suitable for a column depth of 1,050 mm and a truss width of max. 60 mm. The scope of delivery includes: 01x Tiefensteg, used Material color: blue Total length: approx. 1,060 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 928 mm Technical data for the Tiefensteg: Shelving system: SSI Schaefer Profile dimensions: U 50 x 50 mm Truss support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.