thyssen meta used for sale

Stick electrodes 2.5 x 250 -Type: Phoenix 120K -Price: per package -Number: 16 packages available -Weight per package: 3.3 kg

AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg

BVI / ThyssenKrupp Condensing steam turbine MARC6-C03 2005 power generator with 135,000 operating hours, without steam condenser and AC generator. Inlet pressure 89 bar, outlet pressure 0.11 bar, 21,000 KWel x 1,500 rpm, Steam turbine BVI / ThyssenKrupp MARC6-C03 Manufacturer: BVI / ThyssenKrupp Model No.: MARC6-C03 Type: Steam Condensation Serial number: P-900078 Power [KW]: 23,545 Pressure Input [bar]: 89 Temperature Input [°C]: 520 Pressure output [bar]: 0.11 Year of Make: 2005 Hours: 135,000 Weight [kg]: 58,000 Dimensions LxWxH [cm]: 510x400x340

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.

General SKU439X1388 LocationBarneveld MakeThyssen Henschel Main Features MaterialStainless steel Volume30 Ltr. Motor0.75 KW Specified Features - Universal mixer Universal mixer(1x) Capacity30 l. Vessel sizesø 400x235 mm With covercheck Manual operated outletø ± 65 mm With motor1,5 kW (400 V, 1420 rpm) Rotor speed86—535 rpm With lump breakercheck With motor0,5/0,75 kW, 400 V Rotor speed1500/3000 rpm MaterialStainless steel General TypeHU/G-30 Mach.No.800891 Year of construction1986 Mount.on stainless steel framecheck With switchcheck Floorspace1,00 x 0,50 m Total height1,30 m Weight290 kgPowdered foodsGeneric medicinesCatalysts & fillersUniversal mixersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicPaints & coatingsThyssen HenschelIndustries > Food & Fee ...

General SKU004U068 MakeThyssen Henschel TypeTK/D 125 No.850026 Year of construction1993 (has never been used) Mounted on framecheck Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Motor15 KW Specified Features - Cold mixer Cold mixer:Continuous high speed mixer: (1x) Capacity7,5 Ltr Vessel sizesdia. 125mm Max. temperature200 Degr. C. With jacket(2,5 Ltr) With motor15,0 KW + 5,5 KW, 500 Volt (Ex) Rotor speedOuter mixing tool 60-2000 Rpm/Inner 1500 Rpm MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld Floorspace3,5x0,5 M Total height1,0 M ATEX designedcheck Extra Specifications- Easy clean - 2 counter-rotating mixing toolsPowdered foodsGeneric medicinesTea, herbs & coffeeAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarAnimal ...

Various stackable IBC containers with lid and bottom outlet valve. Available stock by manufacturer: - 3 pcs. Thyssen - 5 pcs. Stöcklin

Manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grabber, column jib crane -Manufacturer: Thyssen, pneumatic manipulator type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Reach: max. 2900 mm -Hook height: min. 500 mm / max. 1500 mm -Swivel range: 360° -Minimum ceiling height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Empty weight: 610 kg

General SKU107T743 MakeThyssen Henschel TypeHU/G 1750 Mach.No.831952 Year of construction1987, in 1997 overhauled by Thyssen Henschel Specified Features - Universal mixer Material finishPolished inside and outside With jacketcheck Main Features MaterialStainless steel Volume1750 Ltr. Motor90 KW Specified Features - Universal mixer Universal mixercheck Capacity1750 Ltr Vessel sizesDia: 1788x700 mm With covercheck Pneumatic operated outletcheck OutletDia: 250 mm With jacketcheck With motor60/90 kW, 380 Volt Rotor speed60/120 Rpm With lump breaker(2x) With motor6,5/8,0 kW, 380 Volt Rotor speed1500/3000 Rpm MaterialStainless steel 1.4541 (321) General LocationBarneveld With switchgear(as is) Floorspace3,3x2,0 m Total height2,5 m Extra Specifications- Air purged packing glandsPowdered foodsGeneric medicinesCatalysts & fillersDiscountUniversal mixersDetergent & ...

Equipment: Insulation, Overpressure,Manufacturer: Thyssen Umformtechnik (UCON),Condition: used,Volume: 1,000,Max. overpressure: 2.00,Design: Container,Stand shape: Frame,Insulation: available,Insulation material: PU foam,Material insulating jacket: galvanized steel,Diameter inside: 1,100,Total width: 1,200,Total length: 1,200,Technical documents: TÜV papers,Manhole / dome: in the topsoil (DN 400),Type plate: No,Outlet: 76,Note: slight adhesions, pressure points on the Insulating sheath, traces of use, remarks: partly slight differences in the design Total height 1800 - 1960 mm

This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details.

Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

; neu, sofort lieferbar

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

· NON FERROUS SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 1000 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Metabo welding machine

Wir bieten Ihnen einen gebrauchten Metalldetektor an. Bitte kontaktieren Sie mich, wenn Sie interessiert sind.

approx. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum order: 50 pieces Manufacturer: Meta Type: Meta Clip Year of construction: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces Shelves are partially knocked out or slightly bent on the holders for the floor supports. But a blow with the hammer should be enough so that they can be hung up again without problems. Height: approx. 4cm Payload: unknown – would have to carry at least 100kg Condition: good Available: as of now Location. Frankenberg / Saxony

Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Metallkraft MTBS 3100-40 D The Metallkraft MTBS 3100-40 D is a heavy-duty, motorized metal shear designed for industrial use. Cutting Capacity: Maximum cutting length: 3100 mm Maximum sheet thickness: 4.0 mm Construction and Design: Heavy and stable welded construction Low cutting angle (1.3 degrees) for minimal distortion and burr-free cuts Equipped with plastic-coated material hold-downs, manually adjustable width stop, and angle stop Motor and Performance: Motor power: 7.5 kW (10 HP) Voltage: 400 V, 3-phase Cutting speed: 42 cuts per minute Dimensions and Weight: Overall dimensions: 3650 mm x 2260 mm x 1330 mm Weight: Approximately 3600 kg Additional Features: Electrically adjustable rear stop up to 750 mm (optional up to 1000 mm) Ergonomic working height Self-lubricating and adjustable slideways High-quality roller bearings Operated via foot pedal, allowing hands ...

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. In ...

REF-2563 METTLER TOLEDO SAFELINE METAL DETECTOR WITH REJECT SYSTEM Model: Signature. Year: 1999. Aperture: width 500 mm, height 350 mm. Overall dimensions: width 1,500 mm, length 3,200 mm, height 1,250 mm. OTHER SAFELINE MODELS ARE ALSO AVAILABLE. INQUIRE FOR MORE INFORMATION.

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

Small parts magazine, storage bin shelf, storage bins, drawer magazine -Small parts magazine: Metal drawer magazine with 32 open storage boxes -Accessories: incl. storage boxes/drawers see photos -Number: 1x small parts magazine available -Price: per piece -Dimensions: 310/155/H550 mm -Weight: 4.3 kg/piece

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG

REF-0 LOCK INSPECTION SYSTEMS MET 30+ METAL DETECTOR WITH REJECT SYSTEM Manufacturer: LOCK INSPECTION SYSTEMS Model: MET 30+ Serial no.: 36916-1 Date: 03-2008 Metal detector with integrated rejection system Electrical data: 100/240 VAC; 50/60 Hz; 3 A max. Aperture: width 450 mm, height 100 mm Overall dimensions: 1,290 x 1,050 x 1,170 mm (LxWxH) We have other LOCK INSPECTION detectors available. Inquire for more information.

REF-0 LOMA SYSTEMS IQ3 ST METAL DETECTOR Manufacturer: LOMA SYSTEMS Model: IQ3 + ST Serial no.: Q3B25-25-41021D Year: 2017 Detector electrical data: 100-240 V; 1PH; 50/60 Hz; 0.3 – 0.6 A Conveyor electrical data: 415 V; 3PH; 50 Hz; 3 A Aperture: 250 x 230 mm (WxH) Overall dimensions: 1,850 x 800 x 1,510 mm (LxWxH)

F03 Metal office desk in good condition. ✔️ Specification: Length: 121" L × 76" W × 79" H ✔️ Comes with built-in drawers for storage ✔️ Spacious surface, ideal for office or study use If interested, kindly contact : DAMIA, n.damia@topglove.com.my ARINA arina@topglove.com.my TG MEDICAL SDN BHD - FACTORY F03

New dual-sensor conveyor metal detector. Detects ferrous and non-ferrous metals (stainless steel, aluminium, copper, brass) on 1000 mm conveyor belts before they reach crushers, mills, granulators or shredders. - Upper and lower sensor, separable design for easy installation on existing conveyors - Adjustable sensitivity and interference settings - LCD control unit, dry-contact relay outputs for conveyor stop, alarm or diverter - PLC integration, optional rivet sensor, beacon and siren - Mechanical design adapted to the conveyor on site Made in Türkiye. Delivery FCA Ankara.

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

Dimensions: 1,200 x 900 x 900 mm (W x D x H) / incl. rolls We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 723 mm high 700 mm deep 02x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new  ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) / incl. rolls We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 723 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D  ...

- double-sided bubbling machine Metabo 7445 - Metabo 72730 - 4 kW - shaft diameter 35 mm - 1500 min-1; ready for use

- double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm - 1500 rpm; ready for operation

Dimensions: 1,200 x 900 x 900 mm (W x D x H) We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 888 mm high 700 mm deep 04x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x angle ...

Dimensions: 1,200 x 900 x 900 mm (W x D x H) We offer you here a new workbench of the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Werbank width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery are: 02x workbench stand, new Material colour: compl. galvanized Stand Type: TS4 incl. transverse and diagonal struts, Base plates The stands are pre-assembled (screwed truss) 888 mm high 700 mm deep 02x workbench trusses, new Truss Type: TS Profile abbreviation: 70 x 42 x 3 mm Clear width: 920 mm Material colour: compl. galvanized 01x Worktop, new Type of wood: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for attaching the worktop 04x fuse hook, new Mater ...

approx. 100.11 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 100,11 running meters Shelf offer 100,11 running meters ( 87 fields ) consisting of: 88 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 522 x traverse approx. 115 cm. 1044 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7350,00 € net plus legally valid VAT You will receive an invoice with VAT.

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg