134,663 used machines on RESALE, but how to find them? Machine Search
including roller conveyor system Auction-ID: A1-49836-39
material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...
Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,
New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-49902-53
Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...
Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70-110, 150-195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg
Equipped with: Ladder, metal stock of approximately 50% stainless steel, 35% Steel, 15% Aluminum see stock list for the exact figures Auction-ID: A1-47360-1
Metal transport crate from military/depot stocks 29.5 x 15.5 x 18.0 cm (LxWxH) - Weight each: 2.30 kg Auction-ID: A1-50015-79
Metal transport crate from military/depot stocks 29.5 x 15.5 x 18.0 cm (LxWxH) - Weight each: 2.30 kg Auction-ID: A1-50015-47
Metal transport crate from military/depot stocks Dimensions: approx. 46.0 × 15.5 × 25.0 cm (L × W × H) Weight each: approx. 6.40 kg Auction-ID: A1-50015-45
Metal transport crate from military/depot stocks Dimensions: approx. 46.0 × 15.5 × 25.0 cm (L × W × H) Weight each: approx. 6.40 kg Auction-ID: A1-50015-56
Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg
Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus Auction-ID: A7-49882-162
Machine number: 22674 Table dimensions: 780 x 740 mm incl. welding strap and whetstone Reference: Hanon - Lot 14 Auction-ID: A7-49882-271
Operating voltage: 380 V Frequency: 50 Hz Connection: 1.1 kW Speed: 2795 rpm Press force: 6 t incl. small hand press and suitable tool Reference: Lebendigig - Lot 15 Auction-ID: A7-49882-207
used
ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg
6 parts per page = 12 parts 8 metal shelves each = 96 pieces Dimensions: 100 x 60 x 250 cm each Shelf load: 300 kg 2 bollards without content
Machine number 139/6238/11
- Including types C75, U75. - Lengths 400cm and 260cm. - A total of approximately 230 pieces. - Without yokes. Auction-ID: A1-49374-210
Professionally dismantled and stored - all that remains is to be packed and loaded safely for transport Auction-ID: A1-50085-11
Technical data of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 4 mm. Maximum cutting capacity in stainless steel 2.5 mm. shape of the stamp, Rectangle The HBM E nibbles are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50084-190
Häner Metal Shears HMS18.25 Excavator weight: 18 - 25 t Operating weight: 2,350 kg Dimension A: 2,760 mm Dimension B: 950 mm Dimension C: 520 mm Dimension D: 730 mm Rotation: 360° Front cutting force: 160 t Rear cutting force: 110 t Interchangeable blades: yes Hydraulic Hoses Turn: 1/2 inch Hydraulic hoses open/close: 1 inch Oil flow rate rotation: 30 - 40 l/min Operating pressure on/off: 280 -300 bar Oil flow rate open/close: 180 - 240 l/min Cutting performance: Steel plates: 30 mm U-beam: 300 x 100 x 15 mm H-beam: 300 x 100 x 15 mm T-beam: 320 x 15 mm Angle iron: 200 x 200 x 18 mm Round steel: Ø 70 mm Steel tube: Ø 245 x 10 mm Cycle time: 8 - 12 s Auction-ID: A1-50077-1620
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40
Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137
Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46
Combi machine, sheet metal roller, Beveling and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-50084-113
Sheet metal bending machine 3 rollers - 2 driven rollers - Footswitch - Emergency stop facility Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roller diameter 90 mm Total power requirement 1.5 KW Machine weight approx. 0.7 t Space requirement approx. 2.5 x 0.7 x 1.3 mm Auction-ID: A7-50084-84
Technical data of the sheet metal nibbler. Motor power 625 watts. Maximum cutting capacity in steel 3 mm. Maximum cutting capacity in stainless steel 1.8 mm. shape of the stamp, Rectangle The HBM E nibbles are supplied as standard with: Practical storage case. Universal adjustable nibbler head. Extension for handle. Set of additional carbon brushes. Condition: never used / new (5) Auction-ID: A7-50084-170
Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-50084-206
Combined sheet metal processing machine with: - bending, Tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. - Rolling, Roll diameter 42mm - scissors, max. 1015 x 1mm Material width 1015 mm Material thickness 1 mm Speed by hand Weight 0.25 t Dimensions L x W x H 1.4 x 0.6 x 0.75 m Condition: never used / new (5) Auction-ID: A7-50084-65
Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68
WITH 6 SHELVES (BLIND DEFECTIVE) 2 SHELVES, 2 PCS TOOL CARRIER SHELVES HSK 63 Auction-ID: A1-50085-113
Sheet metal gripper Load capacity 1000Kg Sheet thickness 1 - 15mm Weight 8.0Kg Dimensions 350 x 200 x 100mm Condition: never used / new (5) Auction-ID: A7-50084-193
Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41
Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.
Automatic metal detector, battery powered, never used Overall dimensions: 1070 x 270 x 170 mm Weight: 10 kg Auction-ID: A7-50208-116
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-161
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50065-61
Set of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high-speed steel. Auction-ID: A7-50065-261
Set of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high-speed steel. Auction-ID: A7-50065-161
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-261
Automatic metal detector, battery powered, never used Overall dimensions: 1070 x 270 x 170 mm Weight: 10 kg Auction-ID: A7-50208-280
Cable stripper up to 5cm diameter, not used much in working condition. Auction-ID: A3-46161-17424
et of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, characterized by a hardness and resistance to high temperatures much higher than HSS high speed steel. Auction-ID: A7-50066-61
Power: 0.75 kW per conveyor Year: 2022 Manufacturer: Ortbauer Metall- und Maschinenbau GmbH Model: Siebanlage Stand Alone PS 2.0 Serial No.: 1121-4-01-2 / 21144/11 / 4211 0065-0066 Features: Stand-alone screening system with control cabinet, two conveyors and Topoz motorization, 3×230/400 VAC 50 Hz power supply, 24 VDC control, 16 A current rating, IP54. Dimensions (mm): est. 6000 x 3000 x 3500 Weight (kg): est. 1200 Auction-ID: A1-50223-104
Automatic metal detector, battery powered, never used Overall dimensions: 1070 x 270 x 170 mm Weight: 10 kg Auction-ID: A7-50065-353
Cable stripper and processor, can separate metals from the residual product. 937 operating hours Auction-ID: A3-46161-17426
Cable stripper up to 5cm diameter. In working order. Auction-ID: A3-46161-17425
maximum number of results exceeded
please refine your search
2.000 € 
