three used for sale

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer -Manufacturer: SBA, transformer type ETK 153-003 -Power: 100/209VA 50/60Hz -Technical data: see photo identification plate -Number: 2 x transformer available -Price per piece -Dimensions: 90/85/H90 mm -Weight: 1.5 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA, transformer type ETK 168-0110 -Power: 1840/4340VA -Technical data: see type plate -Dimensions: 175/165/H150 mm -Weight: 20.3 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Block, transformer type B 9412234 -Power: 8000 VA -Technical data: see photo identification plate -Number: 6 x transformer available -Price per piece -Dimensions: 295/120/H280 mm -Weight: 32 kg/pc.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Block, transformer type B 9403139 -Power: 7500 VA -Technical data: see photo identification plate -Number: 13 x transformer available -Price per piece -Dimensions: 295/120/H280 mm -Weight: 31 kg/pc.

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 242mm -Passage: Ø 78 mm -Bolt circle: Ø 185 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: FD, three-jaw chuck mount SK40 -Chuck size: Ø 85 mm -Passage: Ø 16 mm -Weight: 2.3 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRKL 16 -Power: 0.5 kVA -Primary: 3x380 V -Secondary: 24 V -Dimensions: 205/200 / H140 mm -Weight: 8.9 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: from Meuselwitz lathe, chuck size drm. 315 mm - Passage: Ø 103 mm / cone Ø 120 mm -Hole circle: Ø 190 mm -Weight: 49 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size: Ø 190 mm -Throughout: Ø 61 mm -Hole circle: Ø 174 mm -Weight: 11 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: May & Christe, transformer type T 40 E 5113.0920.208 -Power: 1000/4600 VA -Technical data: see photo nameplate -Dimensions: 160/150/H140 mm -Weight: 13.8 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer type CST -Power: 0.5 kVA -Technical data: see photo nameplate -Dimensions: 150/105/H140 mm -Weight: 7.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Ismet, three-phase transformer type DAW -Power: 0.384 kVA -Primary: 220/380V -Secondary: 24V 16A -Dimensions: 150/120/H160 mm -Weight: 6.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Indramat, three-phase transformer type DST/S 2.0 -Power: 2,0 kVA -Primary: 440/415/380V -Secondary: 220V - 5.3A -Dimensions: 200/115/H200 mm -Weight: 12 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Ismet, three-phase transformer type DAW -Power: 0.480 kVA -Primary: 220/380V -Secondary: 24V - 5.3A -Dimensions: 180/135/H160 mm -Weight: 10.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRK 25KM -Power: 0.63 kVA -Primary: 3x380-400-420V -Secondary: 24V DC -Dimensions: 190/190/H170 mm -Weight: 1.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm -Weight: 9.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

With EdmoLift leveling posts, items can effortlessly be raised to a working height of 1,100 mm. The level lift offers leg and foot clearance on three sides, ensuring smooth operation thanks to its excellent accessibility. In addition, with our dolly accessory, the leveling lift becomes mobile and thus offers two extremely practical advantages: Firstly, it can be easily moved during cleaning and cleaning. Second, it can serve multiple jobs, making your investment even more worthwhile. Pallets or containers are placed with the hand pallet truck or forklift directly on the leveling lift. The TSL models have a minimum height of 70 mm, with the TSE models, this is only 10 mm. Type TSLN leveling feet are equipped with a stepless inclination function and can be tilted by 40 ° to the left or to the right. This is a considerable reduction in workload, as it opens up an ergonomic window that help ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo nameplate -Dimensions: 1000/570/H760 mm -Weight: 388kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer, unstab. DC power supply, Contactor -Manufacturer: Block, Unstab. DC power supply -Type: SDV 400/24-15 -Entrance: 3Ph. 400V V -Output 24V - 15A -Technical data: see photo nameplate -Dimensions: 170/200/H270 mm -Weight: 8.5 kg

Description: consisting of clamping jaws, one height gauge, various steel holders, one SMW three-jaw chuck (diameter: 160 mm), two further RÖHM three-jaw chucks (diameter: 200 mm and 200 mm) and one dividing head with a three-jaw chuck (diameter: 130 mm) Approx. Onsite Dimension. (l x w x h): 800 x 650 x 1,400 mm, weight approx.: 150 kg

Description: The system was overhauled for every single component before it was originally installed. Disassembled sawmill plant. , Below is a description of the parts making up the plant (excluding parts not included in the sale, which are absent from the original plant). In order from the first photo (after photo 'disassembled components'):  , Band saw control panel. Saw carriage with 2 vices and variable distance. Saw carriage rope drum. BONGIOANNI saw body Diameter: 1300 mm No. 2 motors of 55 kW power for STORTI multi-blades, No. 1 motor for BONGIOANNI band saw, No. 1 variator for saw carriage. STORTI multi-blade saw Switchboard for BONGIOANNI saw and for automation. Exhausts. Rear roller conveyor of mitre saw with No. 2 stops. Roller conveyor for introduction to STORTI multi-blade saw. Band saw unloading roller conveyor. Three-way conveyor. Lower flywheel o ...

Description: Lot consisting of 2 'Concentration plants': OI 40M concentrator - year 2017 Typical operating conditions: Quantity of water extracted: approximately 20,000 l/h Processing cycle: 10-18 h Concentration ratio: about 5 times Quantity of water processed per cycle: approximately 25,000 l/h Typical operating pressure OI: 25-35 bar Maximum temperature: 50° C The system is substantially composed of: AISI 316 L stainless steel washing tank of approximately 5 quintals Stainless steel preload centrifugal pump complete with three-phase motor 400 V, 50 Hz, power 4.5 kW 1 stainless steel bag safety filter 1 pressurization pump (multi-rotor centrifugal) in stainless steel complete with three-phase motor 400 V, 50 Hz, power 22 kW, regulation with inverter 2 stainless steel recirculation pumps complete with 400V three-phase motor, 50 Hz, 15 kW power, inverter regulation. hyd ...

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs The equipment unit is a device assembly manufactured for cooling the oil of a large machine icon. More information can be seen from the signs in the pictures and by asking. The device has three identical condenser units and they are available for use separately. The device can be adapted for many different purposes.

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

Vices, in three levels adjustable with hand crank with scaling at the three levels of adjustment 1) GRANLUND (green) Jaw width 80 mm Opening width 80 mm Jaw height 20 mm 2.) RID (Silver) Jaw width 80 mm Opening width 80 mm Jaw height 25 mm 3.) RID Bckenbreite 130 mm Opening width 140 mm Jaw height 30 mm Sale is carried out individually or as a package!

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...

USED NX418 DECANTER REF.: C2858 NX 418 RECONDITIONED DECANTER. Carbon steel platform, with 4-leg fixings for ground anchoring. Carbon steel frame, fixed by silemtblock to the platform. Side engine support with belt tension plate. Anchorage of main bearings. Stainless steel bowl in conical trunk shape, in three removable pieces. screw solid discharge built in stainless steel troco-conical shape with contribution of crest tostene and wing advance. Stainless steel top enclosure with three rear hinges for easy opening, screw closure. Feeding tube built in stainless steel Cam type cycle reducer. Main engine at a speed. Power from 18Kw to 3000 Rpm 400V / 50 Hz Properly oversized bearings installed according to manufacturer's standard. Rolling unit driven by 6 V-belts. Save integral protection straps. General characteristics: Model NX418 Weight 1600 kg

1. ) Lawn fan three-point attachment, frame with 9 heavy cast iron discs equipped with 8 triangular knives each, penetration depth up to 11 cm. Working width approx. 170 cm. 2.) Lawn fan three-point attachment, frame with 9 heavy cast iron discs equipped with 8 3/4" hollow spoons, penetration depth up to 12.7 cm. Working width approx. 180 cm. Other aerifiers as well as verticuators with rotating tools stock. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Code: N0004 Brand: SICAR Model: SEGA 315 - Norme CE Professional panel saw SEGA 315 with carriage 3200 mm , blade 315 and scoring unit with separate motor - CE Standard Three-phase main motor 7,5 hp. Parallel guide on round bar with cast iron support and micrometric adjustment, blade lifting and tilting by handwheels, tilting blade unit with integrated scoring unit, aluminium carriage sliding on ball bearings, fence on extendable frame with two reversible stops. TECHNICAL DATA: Main worktable mm 910x550 Additional worktable mm 910x760 Additional lateral worktable mm 500x550 Main blade speed rpm 4000 Scoringunit speed rpm 8000 Blade diameter mm 300x30 Scoring diameter mm 120x20 Cutting height at 45° mm 75 Cutting height at 90° mm 100 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5,5  ...

STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

The Siemens three-phase asynchronous motor is unused, therefore as good as new! Name: Asynchronous Motor Manufacturer: Siemens Type: 1PH72282HF0101BB9-Z Year built: 2011 Hours of operation: 0 Std. Empty weight: weight 870 kg Construction form: V5 Dimensions: length: 1500 mm, width 600 mm, height 700 mm Speed: 1500 / 1750 / 2000 rpm Operating voltage: 340 /395 /450 V Type of protection: 55 IP Description: three-phase asynchronous motor/squirrel-cage motor Technical documentation: yes (PDF) Performance: 160 / 179 / 196 kW Frequency: 51 /59 /67 Hz Rated current: 350 / 342 /332 A. Torque: 1750 /2000 Nm Message: max. coolant temperature: 40°C, max. speed: 4500 rpm Price: on request

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...