three used for sale

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Posiweigh Triple200 Three lane linear weighing line Serial: 3054 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30W Baujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Jenbacher 208 60HZ Phase 3 Stamford alternator. This low-hour phase 3 Stamford alternator is in great condition and is from a Jenbacher 208 that ran approx. 3,000 hrs. Machine ID Number: A09E186991 Frame / Core: HC.I53402 Stamford BS5000 VDE0530 Model: Stamford Hours: 3,000 HZ: 60 RPM: 1800 Volts: 400 / 346 Type rating H KVA: 644 Cont rating KVA: 588 Cont rating kW: 470 Please note this alternator is 60HZ. Price: Please Apply Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

E Motor VEM 160KW 1480 min-1 electric motor Three-phase motor Part Number : K21R MX4 New part from stock. May show traces of storage.

Three-way valve with pneumatic actuator AMG SAF020 F07-17/45 RS20A16A DN25 Flange 115 mm Flanges VA Dimensions: 320 x 240 x 200 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm -Short taper: 6 -Recess: 157 mm -Weight: 38 kg -with: signs of usage but functional

Riggs 1000 Three head filler Serial: TT1737 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Machine vise PAGUS jaw width: 125 mm jaw height: 40 mm span: 80 mm on graduation table 360° rotatable 90° tiltable Dimensions: 320 x 250 x 185 mm

Key data: 55 KW, 2970 1/min

Power: 55 kW Rated Speed: 2970 1/min 400V / 93 A

Key data: 37 KW, 2955 1/min

Power: 37 kW Rated Speed: 2955 1/min Weight: approx. 258 kg Price of an electric motor

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Recess: Ø 160 mm -Weight: 12.6 kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 50 mm -Weight: 13.5 kg

Machine vise PAGUS jaw width: 125 mm jaw height: 40 mm span: 0 mm... 80 mm on table with graduation 360° rotatable 90° tiltable used, tested ! Dimensions: 320 x 250 x 190 mm

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Three-way valve with pneumatic actuator MECAFRANCE, MF DN25, PN40 Mounting dimension: 163 mm Flange diameter: Ø 115 / 70 mm , Bolt circle diameter: Ø 85 mm Material: stainless steel pneumatic actuator: AMG SAF020 F07 DBP 1601746 Control pressure: max. 10 bar New !' Dimensions: 185 x 160 x 310 mm

Pneumatic power chuck, Diameter 400 mm, Big Bore 140 mm 3 jaws, centrically clamped

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 160 mm -Passage: Ø 41mm -Weight: 8.7 kg

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 110 mm -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Weight: 12.6 kg

Marelli AC Generator MX 400 SC/4 AC synchronous generator from 1991 with unknown operating hours, 1 available. 400 volts/50 Hz, 825 KVA. Manufacturer: Marelli Model: MX 400 SC/4 Type: AC Synchronous Generator Serial Number: ML-3700 Power [KVA]: 825 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,190 Speed [1/min]: 1,500 Year of Make: 1991 Weight [kg]: 1.795

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 190 mm -Passage: Ø 56 mm -Weight: 10.6 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Conditi ...

Dreimesserautomat / Three Knife Trimmer Wohlenberg FA 38 Baujahr / Year 1989 Format / Size max. 315 x 410mm Thicknes max. 100 mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Dreischneider / Three Knife Trimmer Perfecta SDYEZ-0 Serial-No. 48966

Three-jaw chuck key, three-jaw lathe chuck -square size: 17 mm -Sleeve: Ø 38 mm -Number: 2x available -Price: per piece -Weight: 2 kg/piece

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Through hole: Ø 37 mm -Weight: 3 kg