thread used for sale

bore capacity in steel (diameter): 100 mm arm length: 3150 mm workpiece height max.: mm threading:: 63 mm column diameter: 700 mm bore head horizontal movement: 2580 mm drilling head vertical adjustable: 1250 mm spindle stroke: 500 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 8-1000 U/min feed range: 0,06 - 3,2 mm/U tool taper: MK 6 total power requirement: 13 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4780 x 1630 x 4600 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head ...

bore capacity in steel (diameter): 125 mm arm length: 4000 mm workpiece height max.: mm threading:: 80 mm column diameter: 800 mm bore head horizontal movement: 3400 mm drilling head vertical adjustable: 1190 mm spindle stroke: 560 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 6,3-800 U/min feed range: 0,06 - 3,2 mm/U tool taper: metr. 80 total power requirement: 18 kW weight of the machine ca.: 28,5 t dimensions of the machine ca.: 5910 x 2000 x 5120 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilli ...

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

thread dia.: M3 - M12 mm : 400 U/min. : 25 Nm air pressure: 6 - 8 bar working area: Radius 1000 mm weight of the machine ca.: 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English optional: - Clamping table with T-slots clamping surface 900 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

threading: 30 M bore capacity in steel (diameter): 40,0 mm workpiece height max.: 380 - 785 mm arm length: 985 mm spindle taper: 4 MK boring head swiweling right/left: -80 / +80 Grad turning speeds: 50 - 2000 U/min table surface area: 1210 x 520 mm column diameter: 220 mm column diameter: 220 mm table surface area: 1.210 x 520 mm quill stroke: 200 mm feed range - spindle: 0,08 - 0,5 mm/U total power requirement: 2,2 kW weight of the machine ca.: 2.800 kg. dimensions of the machine ca.: 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in th ...

bore capacity in steel (diameter): 35,0 mm bore capacity in cast iron: 40,0 mm throat: 320 mm threading: M 24 in Stahl morse taper: 4 MK bore stroke: 160 mm turning speeds: 65 - 3250 U/min table:: 500 x 420 mm throat: 320 mm weight: 375 kg range L-W-H: 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve  ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

thread dia.: M3 - M12 mm : 400 U/min. : 28 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm weight of the machine ca.: 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, chuck flange, intermediate flange for lathe chuck and face plates WMW outer- Ø: 390 mm height: 110 mm machine side: flange: Ø 125 / 168 mm (inside / outside) female thread: M120 x 6.0 Length: 60 mm 2 x locking thread: M10 x 1.5 lathe chuck side: 2 x slotted holes: Ø 28 x 90 mm, bolt circle: 210 / 334 mm 2 x bore: Ø 45 mm, bolt circle: 282 mm 2 x bore: Ø 21 mm, bolt circle: 235 mm 1 x bore: Ø 25 mm, bolt circle: 215 mm short cone: Ø 194 / 196 mm x 10 mm suitable face plate see MMZ666 ! used, tested ! Dimensions: 390 x 390 x 110 mm

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 760 mm turning dia. in gap: 515 mm voltage: 400 V spindle bore: 38 mm spindle turning speed - stepless: 30-405 / 165-2200 U/min number of feeds: 40 longitudinal feeds:: 0,067 - 1,485 mm/U face feeds: 0,033 - 0,742 mm/U face slide travel: 170 mm thread - mm pitch: 0,4 - 7,0 mm thread - inch: 8 - 120 inch. adjustment of table: 165 mm dimensions of the machine ca.: 1660 x 740 x 1180 mm total power requirement: 2,5 kW weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 450 mm -4: jaw chucks -Admission: thread -Thread inside: Ø 69 mm -Weight: 40 kg

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior [https://it.wikipedia.org/wiki/Fatica_(scienza_dei_materiali)]) or the creation of a thread [https://it.wikipedia.org/wiki/Filetting z more resistant than the one obtained by turning [https://it.wikipedia.org/wiki/Tornitura], thanks to a greater hardening [https://it.wikipedia.org/wiki/Incrudimento] of the material., Power (Ton): 18, Number of rollers: 2, PLC: Siemens

Minimal diameter of the gear wheel : 350 mm Maximum diameter of the gear wheel : 280 mm Max. thread diameter : 200 mm Min. thread diameter : 3 mm Max. length : 700 mm

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

thread dia.: M3 - M16 metrisch : 300 U/min. working area: max. 1050 mm engine output: 0,6 kW weight: 25 kg dimensions: 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Adjustable angle. Quick change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Optional: Clamping table with grooves, type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mm threading: 22 M bore stroke: 125 mm throat: 280 mm morse taper: 3 MK table:: 450 x 380 mm / 14er Nut turning speeds: 70 - 3.500 U/min feed: 0,1 / 0,2 / 0,3 mm/U column diameter: 110 mm weight: 320 kg range L-W-H: 500x800x2.100 mm total power requirement: 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing s ...

bore capacity in steel (diameter): 28,0 mm threading: 12 M bore stroke: 130 mm throat: 250 mm table:: 375 x 375 mm morse taper: 3 MK turning speeds: 75 - 3.200 U/min total power requirement: 1,1 / 1,5 kW weight of the machine ca.: 215 kg. range L-W-H: 450 x 600 x 2.020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 °), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of  ...

bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm bore capacity in cast iron: 50 mm spindle taper MT: 4 table-size: 560 x 560 mm spindle turning speed - stepless: 0 - 1800 U/min transmission ratio: 2 : 730 x 500 mm thread dia.: 27 mm base plate: 730 x 500 mm column diameter: 150 mm spindle feeds:: 0,1 - 0,2 mm/U : M 24 total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 730 x 560 x 2400 mm description Industrial gear column drilling machine. The Gears are hardened and ground. The table is rotatable, equipped with T-slots and one Coolant device. The drilling depth stop can by means of the automatic depth stop. T he chuck protection is secured by a switch. Features: - stepless speed - Electromagnetic quill feed - 2-stage motor - Spindle with left / right rotation - Tool ejector - Machine lighting - automatic thread cutt ...

turning diameter over bed: 440 mm turning diameter over slide rest: 250 mm turning length: 1000 mm spindle bore: 62 mm spindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mm metrical thread cutting: 0,5 - 112 mm/U thread - inch: 1/4 - 56 inch. total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,6 x 1,1 x 1,50 m Qick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425 The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

turning diameter over bed: 280 mm turning diameter over slide: - mm turning length: 500 mm spindle bore diameter: 28 mm turning speed range: 15 - 3100 U/min feeds - longitudinal: 0,016 - 1,14 mm/U feeds - cross: 0,002 - 0,18 mm/U thread - inch: 112 - 4 inch. thread - mm pitch: 0,2 - 7 mm centre height: 140 mm total power requirement: 2,2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,5 x 0,6 x 1,2 m - Forkhardt 3-jaw Chuck F 160 - Chuck guard - Lamp - Tailstock MK 3 - change gears - div tool holders, steels, tailstock tips - collet chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Spindle speed infinitely variable electronic 40-4000 1/min Spindle: MK 2 Table height adjustment with rack Thread cutting performance max M12 Setting the thread cutting depth via digital depth display digital speed display digital drilling depth display Drilling depth stop via stop ring Feed / by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Mouth diameter 70 mm Usable table area (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg max distance spindle/table/foot 300/ 370/ 420 mm Motor AC with frequency converter 230 V , 0.54 kW OPTION Drilling package B16 (No. 296570) - Vice felix 80 - Quick-release drill chuck 1-13 mm Price: € 539,- Factory warranty: 3 years Free domicile including packaging (Germany only) Delivery time: immediately from ...

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used

Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 05 cycles per minute | dosing volume: max. 20cm? | tea bag dimensions LxW: 75x75 mm | tea bag capacity: 5-8g | roll width tea bag material: 155 mm | suitable tea bag material: 16.5-21g/m?, one side heat sealable | 3-side sealed sachet dimensions LxW: 82x75 mm | sachet material: heat sealable mono films or laminated composite film | power supply: 220/380V | power consumption: 3kW | compressed air required: 0.6 MPa | compressed air consumption: 100-300l/min | machine dimensions LxWxH: 2800x1310 ...

bore capacity in steel (diameter): 50 mm arm length: 1600 mm workpiece height max.: - mm threading:: 40 mm column diameter: 350 mm bore head horizontal movement: 1250 mm drilling head vertical adjustable: 580 mm spindle stroke: 315 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1250 mm turning speed range: 25-2000 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2500 x 1060 x 2840 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling hea ...

bore capacity in steel (diameter): 80 mm arm length: 2500 mm workpiece height max.: mm threading:: 63 mm column diameter: 550 mm bore head horizontal movement: 2000 mm drilling head vertical adjustable: 1000 mm spindle stroke: 450 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2000 mm turning speed range: 16-1250 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 6 total power requirement: 7,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3730 x 1400 x 4025 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling hea ...

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

PRECISION LATHE / HAMLET COMMODOR 180 GSD Year of construction 2022 / NEW MACHINE Tip height 180mm Center width 1000mm Circumferential diameter over bed 380mm Orbit diameter via face slide 215mm Spindle head DIN 55027 - size 6 Spindle bore 56mm Inner cone MK 6 Cgvnfcyuff Main drive 4 KW Speed range 25 - 2000 1/min Number of gear stages / 9 pieces Number of speed stages / 16 pieces Number of feeds - 200 pieces Longitudinal feeds 0.026 - 0.9 mm/rev Feed rates 0.013 - 0.45 mm/rev Thread /metric 0.3 - 10mm Thread / inch 80 - 2.75 g/inch Quill diameter 80mm Quill stroke 150mm Pinolenkegel MK 4 Coolant device Work light Chip back wall 3 - Axis Digital Display Type - Sino Three-jaw chuck - 200mm Quick-change holder with insert Complete documentation Dimensions: LxWxH 2,6x1.3x1,6 Meter Weight 1800Kg

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 460 x 460 mm turning speeds: 75 - 3200 U/min engine output: 1,5 kW column diameter: 125 mm thread: M16 ST60 feed: 0,10/0,18/0,26 mm/U dimensions: 800 x 500 x 2200 mm weight: 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M5 - M24 metrisch : max. 200 U/min. working area: max. 1200 mm engine output: 1,2 kW weight: 25 kg dimensions: 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mm throat: 360 mm bore stroke: 220 mm morse taper: 4 MK table:: 570 x 480 mm threading: M 42 Stahl turning speeds: 50 - 2.200 U/min feed: 0,08 - 0,50 mm/U column diameter: 180 mm total power requirement: 3,0 kW weight: 575 kg range L-W-H: 750 x 950 x 2380 mm The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tal ...

pneumatic cylinder, round cylinder, double-acting CAMOZZI 24N2A16A200 stroke: 200 mm piston diameter: Ø 16 mm rod diameter: Ø 6 mm rod thread: M6 x 1,0, Length: 15 mm pmax: 0.1 - 1.0 MPa ( 1 - 10 bar ) Mounting thread: M16 x 1.5, Length: 15 mm Mounting socket: Ø 6 mm, Length: 12 mm New ! Dimensions: 312 x 21 x 20 mm

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) n max: 13000 rpm diameter: Ø 40 mm sleeve length: 208 mm tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( cone 1 : 7,, 5 ) thread: M10 x 1.0, length: 10 mm, left-hand thread flange: 85 x 56 x 8.5 mm, bore: Ø 22 mm used, tested ! Dimensions ( spindle ): 261 x 85 x 56 mm Dimensions ( packaging ): 365 x 85 x 125 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting, 3 pieces SMC 1x C85N8-10 2x C85N10-10 stroke: 10 mm piston diameter: Ø 8 / 10 mm rod diameter: Ø 4 mm rod thread: M4 x 0,7, Length: 12mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M12 x 1.25, length: 10 mm Mounting socket: Ø 4 mm, length: 8 mm width across flats: 19 / 15 mm New ! Dimensions ( without nut ): 97 x 15 x 15 mm

Flow rate: 550 ltr./min Head/pressure: 30 m / 3.0 bar RPM: max 400 1/min KW / Voltage: 3,0 / 400 V Suction side / pressure side: DN 100 milk thread / DN 100 milk thread Type: Stationary on galvanized bearing block, pump head in stainless steel, for highly viscous liquids, built in 2017, L 1,180 mm, W 500 mm, H 720 mm Type: Spiral piston pump 07.014 Manuf.: Herold & Co. GmbH Product number: 2023001

Oil brake cylinder, shock absorber, shock absorber, adjustable, pushing single-acting FESTO YDR-16-20 System Schnetz 14900 W: max. 32 J ( 32 Nm ) stroke: 20 mm Rod diameter: Ø 18,0 mm, Length: 28 mm Thread: M20 x 1,0 thread length: 53 mm with two nuts, width across flats: 24 mm New ! Dimensions ( without nut ): 185 x 20 x 20 mm

Shock Absorber, Shock Absorber ACE CONTROLS MC 600 EUM ( MC600EUM ) MC600M stroke: 25,4 mm rod diameter: Ø 8.0 mm, length: 30.5 mm thread: M25 x 1.5 thread length: 100 mm with nut, width across flats: 30 mm with hexagon socket, width across flats: 10 mm New ! Dimensions ( without nut ): 141 x 25 x 25 mm

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse -Counter holder for the return is missing -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.3 kg

Shock Absorber, Shock Absorber ACE CONTROLS MC 150 EUM ( MC150EUM ) MC150M stroke: 12,7 mm rod diameter: Ø 4.8 mm, length: 17.5 mm thread: M14 x 1.5 thread length: 60 mm with nut, width across flats: 17 mm with hexagon socket, width across flats: 6 mm New ! Dimensions ( without nut ): 87 x 14 x 14 mm