140,465 used machines on RESALE, but how to find them? Machine Search
Used blister machine by Empak model PFR-7. New 1995. A lot of formats available.
Electrode diameter 0.5 to 3mm Travels 300x400x350mm CE certification proves the best possible safety Complete series in above-ground construction Electrodes Ø 0.5-3mm Travel X-axis 300mm Travel Y-axis 400mm Travel Z-axis 350mm Travel W-axis 300mm Speed C-axis 30-60mm/min Rapid traverse Z-axis 120mm/min Aspect ratio 300:1 Table dimensions 320x440mm max. working current 30A
For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures
For sale is a well-preserved bottle washing machine of the MAG brand. The machine was in use until about 4 months ago and is available now. Specifications: - Capacity: 9,000 - 18,500 bottles/hour - Year: ca. 1985 - Bottle cells for 0.5 litres, NRW, Vichy - Water baths/headboard made of stainless steel - Dimensions (LxWxH): 8,800x2,900x3,1600mm
Reference Num.: 4152 Brand: Laconda Type: 620 Construction year: 1988 Available: directly Status: Not in production Location: Deutschland Equipment: - 10 Stationen - Rütteltisch - Format A3
Ref. no.: 18142 Manufacturer: DEMAG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg
Ref. no.: 16369 Manufacturer: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: very l ...
Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg
Inv. Num. : 8066 Type: AGIECUT CLASSIC 2S Producer: AGIE Created: 2003 Parameters: Max. travel length of the X-axis: 350 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 256 mm Maximum workpiece length: 750 mm Maximum workpiece height: 250 mm Maximum workpiece height: 550 mm Maximum table load: 450 kg Machine height: 2305 mm Machine length: 1670 mm Machine width: 2040 mm Machine weight: 2580 kg
MEP AVT400 Capping machine Serial: 271221 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
Camera, hand button with display Max. gauge length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated probe camera Measurement accuracy ±(28 + 5 L/1000) μm Repeatability ±10 μm
Single-screw regranulation plant NGR Technical details: • Screw diameter : 85 mm • Production capacity: 500 kg/h • Screw L/D ratio: 21 • Degassing system: Yes • Engine power: 90 kW • Nozzle Type: Spaghetti • Suitable for (material) processing: PET,PE • Recently recycled material: PET • Suitable Material Form: Film Flakes, Trims • Use of the product: Sheet • SCREEN CHANGER: BSC160 Back-flushing screen changer • Screen Changer Type: Automatic Other specifications: Recycling machine for PET (non-food safe) and PE Material Output: PET/PE printed films (12pm PET + 30pm PE) Origin: Post-Industrial, Moisture: Dry (
Key data: 25 mm
Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg
Complete Britas filter with many spare parts. Off site, available immediately.
Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)
Drilling method ELB Full drilling 4-33mm Drilling depth max 737mm Spindle antrib 7,5 kw Spindle speed 550-6400rpm Working feed 35-320mm/min Rapid traverse 3500mm/min Coolant High Pressure Pump, Paper Filter, Chip Conveyor, Magnetic Separator Connection 20 KW Dimensions 4100 x 1650 x 1850mm Weight 3500 KG
Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction
Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system
Air table Polar; cleaned and tested; Format 75x35cm; height-adjustable. AIr table Polar; cleaned and checked; size 75x35cm; adjustable in hight.
Key data: 3600 mm, 4200 mm, 4800 mm
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,600 mm Circumferential diameter (max.) 4,200 mm Workpiece height (max.) 4,800 mm Total height of the machine 8,700 mm Maximum workpiece weight 80,000 kg. Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam in 100 mm increments 2,800 mm Crossbeam Support (Right) Horizontal adjustment support - 1,800 to + 2,200 mm Vertical displacement of the chisel slide valve 1,500 mm Cross-section of the chisel slide 240x240 mm Tool stations 20 pcs. Side Support (Right) Vertical adjustment support 2,800 mm Horizontal displacement of the chisel slide valve 1,000 mm Cross-section of the chisel slide 240x240 mm Turning diameter max./min. 4500/2500 mm Tool Changer Main Drive: Main motor power 105 kW Face plate speed ...
Used Meyn model 20U carcass washing device for the inside and outside. New 2002.
The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!
Machining tank inner dimensions (W x D) 1040×780 mm X,Y,Z Strokes 600,400,270 mm U x V axis stroke 80×80 mm Max. taper angle ± 15° (Thickness: 120 mm)
Screening Machine Fully functional Number of sieves: 3 Viewing by arrangement Location: 99099 Erurt am Haarberg District of Rohda
The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative
Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg
4 Buckles, Electronic knife Digital counter Digital program Belt delivery Free of damages.
Bottle washing machine PAC type: CB 12-0,5 R-6 CB year of manufacturing: 1995 capacity: approx. 6.000 bph control range: 3.000 - 6.300 bph bottle type: 0,5 ltr, Euro, NRW bottles bottles per row: 12 bottles inside the machine: 1.080 bottle carriers: 96 dimensions: length: 6.110 mm width: 1.545 mm height: 2.175 mm (without feet) weight: approx. 5.800 kg water consumption: 3,6 m³/h heat consumption 80°C: 480 kJ/h x 1000 electric consumption: 11 kW
Multivac tray sealer T 700 used for fresh meat with oxygen gassing Length: 4.9 mtr. Control IPC 05 Duplex vacuum pump: 600 cbm/h Shells/Tools: 190x144, Deep 75mm 227x178, Deep 50mm included in the price: 1 x Carsoe conveyor belt L 5 mtr. with 2 destacking heads
ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 5 mm polypropylene strapping Equipped with a baler Output approx. up to 36 packets/min Speed table hinges infinitely adjustable Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
Air table 2 side tables 3 knives Photocells Program Video available upon request
BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise, ...
used
MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5
WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 mm YEAR:1997
Key data: 1300 mm, 4 , 150 mm
WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm
Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...
Inv. Num. : 8106 Type: TP1260M Producer: Le Mans Created: 2023 Parameters: Maximum power: 6.6 kW Length of profiles: 12000 mm Maximum workpiece weight: 1000 kg Maximum profile: HEB 240 mm Maximum pipe diameter: 380 mm
used
Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg
Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup
2018 Type: 101-60 Machine No.:108141 electric double eyelet device with foot switch for inserting 2 eyelets at a fixed distance of 28mm Punches holes and eyelets in one operation. Eyelet type 8E, 8E 4long and 8E 5long Inner diameter 5.50mm Insertion depth 60mm Paper thickness 2 to 15 sheets (8E), 2 to 20 sheets (8E 4long) 5 to 25 sheets (8E 5long) Automatic eyelet feed via magazine Weight 49kg Available: immediately Located: Germany
Spindle Drilling Machine 1994 (Engine New 2015) Machine no.: PB04.08.94.261 4 drill heads Available: immediately Located: Germany
maximum number of results exceeded
please refine your search
