thread rolling machine used for sale

Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

Auction-ID: A3-46110-13145

Auction-ID: A3-46110-13147

PLC – controlled universal thread chasing machine suitable for all external and internal threads, as well as for peeling operations on rods and shafts (with peeling heads of different sizes), with 7" color touch screen. External and internal threads from M10 to M60 can be cut with the machine on all rotationally symmetrical workpieces such as pipes, bushings, shafts and reinforcing steel rods (taped external threads, drilled internal threads or rolled external threads with rolling heads). All thread types - male and female - metric ISO thread - Whitworth thread - trapezoidal thread - pipe thread - round thread - saw thread - UNC/UNF - and other USA threads etc. Strehlkopf speeds infinitely variable from 25 to 300 rpm Hollow spindle bore Ø 64 mm Maximum thread length 300 mm in one clamping (optional up to 600 mm length) The strehlkopf can also be used to peel wave-shaped  ...

Automatic Thread Processing Machine Multitapper 1212 CoastOne - Made in Finland Exhibition machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

Automatic tapping machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

workpiece diameter: 200/250 mm workpiece diameter: 200/250 mm threading length: 500 mm threading length: 500 mm thread pitch: 6 - 72 mm thread pitch: 6 - 72 mm grinding diameter - min.: 1 mm grinding diameter - min.: 1 mm centre distance: 800 mm centre distance: 800 mm max. module: 8 max. module: 8 spindle speeds: 0,19 - 32 U/mm spindle speeds: 0,19 - 32 U/mm pitch angle: 40 ° pitch angle: 40 ° relief of the tap: 0,015 - 4 mm relief of the tap: 0,015 - 4 mm grinding wheel diam. min/max.: 275 / 350 grinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kW total power requirement: 11 kW weight of the machine ca.: 3,6 t weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm

Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mm threading length: 3000 mm thread pitch: 2-16 mm total power requirement: 25 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg  ...

workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 460 mm threading length: 900 mm thread pitch: 100 mm total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm : max. 600 U/min. working area: max. 1100 mm engine output: 0,6 kW weight: 30 kg Electric tapping machines for M3 - M12 threads, 8 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English! Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 3 - 10 mm Tools speed: 120 - 600 U/min table-size: 250 x 350 mm throat: 250 mm voltage: 380 V threading length: 80 mm total power requirement: 0,55 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,7 x 0,7 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 mm : max. 187 U/min. working area: 180 - 2000 mm engine output: 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M10 - M33 mm : 35/115 U/min. : 320 Nm air pressure: 6 - 8 bar working area: 400 - 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: - mm threading length: - mm throat: ca. 2000 mm total power requirement: 0 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,30,82,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...

General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional

Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000m ...

Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

spindle taper: 2 x SK 40 forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm workpiece dia. with double equipment: max. 135 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coo ...

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

a threading machine > - Manufacturer: Rothenberger > - Model: Supertronic 4 SE > - Age: approx. 1 year > - Condition: Very good, technically perfect, little used > - Accessories: 2 threading heads included > - Invoice: available

Thread milling machine WMW GFL 400x2000 with change gears.

MAX DIAMETER 320 , MAX LENGTH 500

Key data: 12 mm, 3000 1/min, 1250 mm

Automatic thread processing machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4; only retrofittable) 2x threading, molding; 1x Lowering Station Microlubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files Warranty: 36 months after installation Immediately available; Subject to prior sale Viewing under power possible at any time by arrangement

thread dia.: bis 4 / 100 mm threading length: ? mm thread pitch: div. mm accessories:: 4 Schneidköpfe total power requirement: 0,75 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 1,511,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software so ...

grinding length: . mm grinding width: . mm workpiece height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 861 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: . mm grinding width: . mm workpiece height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 865 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 16 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can  ...

thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping  ...