thread rolling machine used for sale

A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.

Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

Key data: 1000 mm, 450 mm

Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Type: BW500/420 Year of Make: 1975 Machine Type: Cold Rolling Mill / Strip Rolling Mill Modernization: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel Rolling Mill Year of Make: 2015 Operating Voltage: 3AC 400V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24V Location: Pforzheim

Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures

Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures

Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg

Plastic Film Processing Machine General data: Machine type: Plastic film processing line Manufacturer: Unknown Model: Unknown Year of manufacture: Unknown Serial number: Unknown Condition: Used Weight: approx. 8000 kg Dimensions (L x W x H): approx. 6000 x 2500 x 3500 mm Technical details: Power: Unknown Includes unwinding and rewinding stations Multiple heated zones Control panel with temperature regulators Ventilation hood and cooling system Description: Industrial plastic film processing line designed for converting plastic rolls into finished or semi-finished film products. The machine operates through heating, shaping, and rewinding processes and is typically used for applications such as polyethylene film embossing, perforation, or lamination. Auction-ID: A7-45365-1

The rolling storage box is a robust handling equipment, designed for the storage and transport of equipment in a professional environment. Sold as is, this model has dimensions of L172 x W105 x H190 cm for a weight of 260 kg, offering a large storage capacity and a structure suitable for intensive use in workshops, warehouses or production areas. Auction-ID: A1-44765-348

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T

Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB

GAMOR threading machine model RHG-2B. Year of manufacture 2004. Machine number 655. Threading capacity from M2 to M36. Low-end working speed from 22 to 105 rpm. High-end working speed from 130 to 630 rpm. Maximum working pressure 140 kg/cm². Engine power 3 HP (≈ 2.2 kW). Electrical connection 380 V. Machine with CE marking. Articulated arm configuration for threading operations. Suitable for series production and repetitive work. Approximate dimensions. Auction-ID: A7-44864-4

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

Semi-automatic short-threaded cutting machine for the production of external and internal thread Gr. via cross slide: 160 mm Gr. via cross slide guide: 240 mm tip wiete 250 mm nSpindle=180-2240 rpm spindle bore: 61 mm gr. threaded length/deep 100/6 mm

REMS MAGNUM 4010 LT pipe threading machine was built in 2020 in Germany by REMS GmbH & Co KG. This extremely versatile tool is designed for threading all kinds of pipe and bolt threads. The clamping chuck used prevents material slippage during machining, making the process very stable. The large distance between the clamping chuck and the centring chuck, in turn, allows long pipes to be clamped securely. After machining, the edges of the material are smoothed by an internal deburring device with two blades. The MAGNUM 4010 LT pipe threader on offer weighs approximately 80 kg. Technical specifications of the REMS MAGNUM 4010 LT pipe threading machine - thread types: R, NPT, G, NPSM, Pg, M, UNC, BSW - pipe thread diameter: 16-63 mm / ½ – 4″ - bolt thread diameter: 18-60 mm / ½ – 2″ - pipe thread length (cylindrical): 150 mm - bolt thread length: unlimited - spindle rotat ...

Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price

Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping machine, pipe thread cutter -for pipe size: max. 2 inches -with: cutting jaws -Speed: rpm -Foot switch with emergency stop function Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1200/660/H1250 mm -Weight: 166 kg

Thread cutting machine, pipe thread cutter, thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -for: Pipe size: max. 2 inches -Cutting jaws: 1/2-2 inch -Operating voltage: 240 volts -Dimensions: 1000/600/H1114 mm -Weight: 80 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2-2 inches -Operating voltage: 380 volts -Weight: 100 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm

Equipped with foot pedal and cover. Auction-ID: A1-41992-113

On and including pallet Auction-ID: A1-45383-27

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...