thread roller used for sale

Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven -Drive motor: Flender Himmel 0.37 kW with variable gearbox -Speed: 3.75 to 70.2 m/min -Roller width: 140 mm -Roller diameter: 50 mm -Axle spacing: 140 mm -Conveyor length: approx. 4400 mm -Base: height adjustable -Dimensions: 4480/360/H1045 mm -Weight: 131 kg

Machine is in perfect condition. Was only in operation intermittently, 3900 operating hours run Drive motor: 250 KW Engine data: see nameplate

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3400 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ------- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable ...

We sell SKF 24036CC spherical rollers or SKF NJ 2228 ECML ball bearings unused items

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5700 € : 110.01 € : 1550 mm : 1 mm : 68 mm : 1.5 kW : 2110 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance

Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf) from the manufacturer Hubtex, model TRPA. The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Master Data & Weights Manufacturer: Hubtex Maschinenbau GmbH (Fulda) Model / Type: TRPA Engine Number: 39080 Maximum load capacity: 2,750 kg Length approx. 5000 mm Permissible unload (imbalance): max. 500 kg Net weight of the system: 1,200 kg Capacity: approx. 14–16 support rods / roller places Electrical connected loads Mains voltage: 380 V 3 N~ + PE 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Degree of protection: IP 44 The carpet and floor coverings for the circulation shelf can be purchased for € 1000 net extra. Item location: Frankfurt am Main Period: The collection m ...

Graule RO-ST60 Roltafel met aanslag en pneumatische rem Merk: Graule Type: RO-ST60 Lengte: 3.0 meter (netto) Maat instelling: Grof en fijn verstelling Nauwkeurigheid: 0.1 mm Condition: functional checked

Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 105 Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer Böttcher Böttcher KBA RA 105 Roller 0905480 B 1902 Böttcher KBA RA 105 Roller 0905495 B 1903 Böttcher KBA RA 105 Roller 0905473 B 1703 Böttcher KBA RA 105 Roller 0905472 B 1702 Böttcher KBA RA 105 Roller 0905476 B 1511 Böttcher KBA RA 105 Roller 0905476 B 1601 Böttcher KBA RA 105 Roller 0905476 B 1606 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905470 B 1702 Böttcher KBA RA 105 Roller 0905474 B 1604 Böttcher KBA RA 105 Roller 0905470 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1605 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905473 B 1606 Böttcher KBA RA 105 Roller 0905495 B 1605 Böttcher KBA RA 105 Roller 0905480 B 1605 Böttcher KBA RA 105 Roller 0905472 B 1605 Böttcher KB ...

Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE

Der Schrägrollentisch dient zur Überbrückung von Höhenunterschieden und Maschinenzwischenräumen. Außerdem benutzen Sie den Schrägrollentisch als Basisstation für den Cardtipper (mit GWG), den Tapesspender (mit GWG), die OUE-Einrichtung oder zum Gummieren. The inclined roller table is used to bridge height differences and gaps between machines. You can also use the inclined roller table as a base station for the card tipper (with GWG), the tape dispenser (with GWG), the OUE device or for gumming. Schrägrollentisch / Inclined Roller Table GUK RT 46 Baujahr / Year 1994 - Serial-No. 34088 fahrbar und höhenverstellbar / mobile and height adjustable

Key data: 3000 KG, 2900 mm, 2300 mm

For sale are two used roller floor racks from Lützenkirchen Lagertechnik GmbH with foldable stem model "4007" - Width approx. 2,900mm - Depth 2,650mm (unfolded) - Height 2,300mm - 5 roller floors each with a payload of 3,000kg - Drawers: Ball bearings with rollers - Net usable area per drawer 2,600x1,300mm with 1 cover shelf each - Pull-out trolley can be swivelled, with brake - Colour RAL 5012 light blue The price shown is "net" per shelf. If you are interested, please feel free to contact us.

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: MOSCA, Roller conveyor driven inclined conveyor -Type: SCHÄGFR.F. -Drive motor: Lenze 0.37 kW -Speed: 27 m/min -Roller width: 475 mm -Roller diameter: 50 mm -Axle spacing: 65 mm -Conveyor length: approx. 1500 mm -Base: height adjustable -Dimensions: 1530/710/H1040 mm -Weight: 143 kg

Driven roller conveyor Length 3100 mm A total of 16 rolls Of which 14 are powered Diameter 80 mm Roll length 600 mm Working height 920 mm Feed speed 14 m/min. Motor power 0.55 kW Mobile on castors Dimensions 3400 mm x 740 mm x H 1050 mm Weight approx. 350 kg (Previously stood in front of four-sided planer copper mill)

Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical d ...

Width 56 cm Year of construction 2017 Inclined roller table for alignment Height adjustable H version with round plug Delivery date: Immediately

Glue spreading machine with two horizontal application rollers, glue trays, handwheel adjustment and start/stop push-button controls. Mounted on castors. Auction-ID: A1-50699-37

Pendulum circular crosscut saw for wood, equipped with an electric motor, enclosed belt drive, circular blade guard and manual operating handle. Mounted on a steel support frame with roller tables and longitudinal workpiece fence. Motor-mounted push-button controls. Auction-ID: A1-50699-44

Checkweigher for boxes and crates, This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet., The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/checkweigher-with-roller-conveyor/, Type: Checkweigher with roller conveyor, Weigh platform: Roller conveyor, Controls: Touchscreen with product data and statistics, Construction: Stainless steel, on adjustable feet

Used security roller shutter (roll-up shutter) for a shop entrance. Width: 5.80 m (5800 mm). Height: 3.80 m (3800 mm). Condition: used. Suitable for shop fronts, warehouses, workshops and other commercial or industrial openings. Dismantled/installed condition and the operating mechanism are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-124

Used Track length: 11000 cm Scissor Tracks Length: 11 meters Scissor roller conveyor (short): 4.2 meters Roller width: 610 mm Web width: 900 mm Roll diameter: 40 mm Heart to Heart: 120 mm Min. height: 800 mm Track height max: 1,150 mm

Used 4-metre roller conveyor (auxiliary roller support / helper) by OMGA. • Auxiliary support for carrying long workpieces in front of or behind a machine. • Suitable for metal fabrication and woodworking shops. • For exact technical specifications and current operating condition, please contact us. Auction-ID: A7-50988-129

Auxiliary roller support (outfeed/infeed roller stand), left-hand version, 4 metres long, model N705/895. • Used as an auxiliary support for long workpieces, positioned on the left side of the machine it serves. • Suitable for metal fabrication and woodworking shops. • For exact technical specifications and current operating condition, please contact us. • new old stock Auction-ID: A7-50988-100

Type: 4 m transfer roller conveyor • Model: N899/2101 • Construction: Aluminum wheel with aluminum driver; aluminum frame guide accepts length and meter sticks easily; includes iron wheel and iron frame sections for durability. • Application: Ideal for supporting material handling near hacksaws or other cutting equipment. Designed for easy integration and manual transfer in fabrication and workshop environments.in very good condition, ready to work Auction-ID: A7-50988-92

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Vibratory roller, diesel engine, double vibratory roller, electric ignition, power steering, water system, never used Overall dimensions: 2000 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-50798-18

For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-447

galvanized, electrically driven, with control box, cabling, 400 Volt; Including transport frame. First Photo for illustration Auction-ID: A1-50707-87

Pair of manual roller unwinders/winders for reels minimum maximum wheel distance 35/60 cm wheel diameter 20 cm Auction-ID: A7-51362-16

Technical details Type: Noodle cutting knife assembly Quantity: 3 units Configuration: - Ribbed stainless steel cutting roller - Mobile support frame - External drive connection for gearbox/motor Application: - Cutting dough sheets into noodle strands - Pasta and noodle production lines Construction: - Stainless steel cutting assembly - Industrial frame construction Dimensions (per unit): - Length: Approx. 1200 mm - Width: Approx. 500 mm - Height: Approx. 1000 mm Weight (per unit): Approx. 90 kg Condition: Used Observed condition: - Visual condition cannot be verified from the available information - Operational status unknown Auction-ID: A7-51359-11

For conveyor belt, approx. 1400 mm long Included: Pallet Auction-ID: A1-51285-443

Average: approx. 440 mm, approx. 8000 mm long Auction-ID: A1-51285-431

For conveyor belt, approx. 1400 mm long Included: Pallet Auction-ID: A1-51285-446

general engine and hydro motor overhaul and installation required, battery and engine are missing; Auction-ID: A7-51358-3

Used for chain conveyors, scraper conveyors and industrial transport systems Auction-ID: A1-51321-89

For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-445

For conveyor belt, approx. 1750 mm long Included: Pallet Auction-ID: A1-51285-444

Used for chain conveyors, scraper conveyors and industrial transport systems Auction-ID: A1-51321-88

approx. 4000 mm long Included: Wooden box Auction-ID: A1-51285-432

Batch of roller conveyor and parts, various lengths and widths, including: 192x47cm, 72x107cm, 353x67cm, 269x700cm, various supports, bends, braces, electronics components, drive motors, in 4x pallet box and on 12 pallets (pallets have various sizes) Auction-ID: A1-41281-45

Working length 2000 mm Working width 360 mm Roller width 360 mm Roller diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5) Auction-ID: A7-51438-569

3m roller conveyor with manual length stop. Working length 3000 mm Working width 360 mm Roller width 360 mm Roller diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Machine weight approx. 0.050 t Dimensions L x W x H 3.1 x 0.45 x 0.6 m Condition: never used / new (5) Auction-ID: A7-51438-575

Model: DM750-1000 Speed: 0-6 km/h Air-cooled four-stroke diesel engine Climbability: 30% Power: 13 hp/9 kw, 3600 rpm Fuel tank: 5.5 litres Static line load (before and after): 77/56 N/cm Vibration Frequency: 75Hz Width of steel wheels (front and rear): 700 mm Thrilling power: 30KN Diameter of the steel wheels (front and rear): 530 mm Working data: Length 2100 mm. Width: 860 mm Hydraulic drive - stepless speed control. Dual drive on front and rear wheels. Vibration: Vibration-electromagnetic coupling Turning: Hydraulic steering Water method: Electronically controlled high-pressure water spray Weight: +- 970 kg Auction-ID: A3-46111-21553

Roller width 400mm Roller track length 2000mm Roller conveyor height 750 - 1000mm Weight 80Kg Condition: never used / new Auction-ID: A7-51438-468

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; The mileage, operating hours and other data are to be understood as non-binding guideline values. No guarantee is given for the accuracy of the information ; Auction-ID: A1-51152-200

Ammann AR 65 compactor roller from 2006, equipped with a Hatz diesel engine with electric start. Machine for compaction work with age-appropriate condition of use, with traces of use, works perfectly Hatz engine – power 5.1 kW – weight approx. 715 kg. Auction-ID: A3-46111-36362