thread roller used for sale

workpiece diameter: 200/250 mm workpiece diameter: 200/250 mm threading length: 500 mm threading length: 500 mm thread pitch: 6 - 72 mm thread pitch: 6 - 72 mm grinding diameter - min.: 1 mm grinding diameter - min.: 1 mm centre distance: 800 mm centre distance: 800 mm max. module: 8 max. module: 8 spindle speeds: 0,19 - 32 U/mm spindle speeds: 0,19 - 32 U/mm pitch angle: 40 ° pitch angle: 40 ° relief of the tap: 0,015 - 4 mm relief of the tap: 0,015 - 4 mm grinding wheel diam. min/max.: 275 / 350 grinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kW total power requirement: 11 kW weight of the machine ca.: 3,6 t weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm -Weight: 160 kg

Thread cutting dies, replacement thread cutting dies, thread cutting head with Strehler dies, thread cutting die, thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, Thread cutting die set, unused, original packaging -Type: 3/4 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1 kg/set

Threading dies, replacement dies, threading head with chaser dies, threading stock, threading machine, pipe thread cutter -Manufacturer: Ridgid, thread dies set unused original packaging -Type: 1/2 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1kg/set

ORT RP18B overhauled

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 811A 1/8 to 2 inch -Pipe size: 1/8 to 2 -Bolts: 1/4 to 2 -Dimensions: 260/240/H70 mm -Weight: 5.6 kg

Machine comes from the Daimler Benz technical center X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Speed range 6,500 rpm Spindle holder SK 40 WZ changer 24-fold Control Siemens 840 D Total power 20 kW Machine weight 5500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition very good

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Thread cutting head with chaser jaws, thread cutting stock, die head, thread chaser -Manufacturer: Bucki, Thread Chase Thread Restorer -Type: 61060 -Outer Diameter: 1 3/4 to 4 -Dimensions: 350/125/27mm -Weight: 1,7 kg

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 100 kN, Ø Pieces: 2mm min; 40mm max, Passed: 3.5mm max, Grooving step: 1.75mm max, Roller width: 70mm, Ø roller: 80mm min; 120mm max, Speed of roller shafts: 32 51 95 150 rpm, Ø roller bearing shaft: 40 standard, Wheelbase: 80mm min; 165mm max, Work career: 7 min, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 3 Kw, Electrical power consumed: 4.68 Kw, Tank capacity: 80 L, Weight approx.: 750 Kg

Lamination pressure: 220 kN, Ø Parts: 3mm min; 75mm max, Passed: 6mm max, Grooved pass: 2.25mm max, Roller width: 160mm max, Ø roller: 145mm min; 200mm max, Roller shaft speed: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 130mm min; 200mm max, Working travel: 15min max, Advance: from 0.5mm/s to 6mm/s, Rolling time: from 0.1s to 100s, Pause time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Capacity deposit: 130 L, Weight approx.: 2100 Kg

Lamination pressure: 220 kN, Ø Parts: 3mm min; 75mm max, Passed: 6mm max, Grooved pass: 2.25mm max, Roller width: 160mm max, Ø roller: 145mm min; 200mm max, Roller shaft speed: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 130mm min; 200mm max, Working travel: 15min max, Advance: from 0.5mm/s to 6mm/s, Rolling time: from 0.1s to 100s, Pause time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Capacity deposit: 130 L, Weight approx.: 2100 Kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg

Laminating pressure: 160 kN, Ø Pieces: 3mm min; 50mm max, Passed: 5.5mm max, Grooving step: 2mm max, Roller width: 100mm max, Ø roller: 133mm min; 165mm max, Speed of roller shafts: 32 40 51 59 81 95 118 150 rpm, Ø roller bearing shaft: 54mm standard; 69.85mm special, Wheelbase: 135mm min; 205mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, Inclination of roller-carrying axes: +/- 5º, main engine: 5.5 Kw, Electrical power consumed: 7 Kw, Tank capacity: 130 L, Weight approx.: 1700 Kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 2x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, thread cutting quick-change chuck -Tapping chuck: Tapping quick-change chuck -Type: M12 Ø9X 7 -Total dimensions: Ø50 x 71 mm -Weight: 0.5 kg

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 75 - 100 mm M 0.8 - M 6 incomplete! with protective box Dimensions: 310 x 140 x 40 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 125 x 40 mm

Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm

Threaded Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 110 x 35 mm

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Tapmatic, thread cutting device -Type: SK40 mount -Dimensions: Ø 63 x 158 mm -Weight: 0.8 kg

Tapping Machine PROGRESS MWB Model 71 1/2 to 2 inch 220 V 1.05 kw with sawing device ! with 2nd set of jaws and 2nd cutting head !' Dimensions: 950 x 500 x 1200 mm

Threaded Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 110 x 35 mm

Thread cutting chuck, thread chuck, tapping chuck, thread cutting apparatus -Thread cutting chuck: Thread cutting device 3 pieces -Recording: MK3 -Bore: 2x Ø16 mm / 1x Ø14 mm -Delivery/Price: complete -Transport dimensions: 280/190/H88 mm -Weight: 9.7 kg

Ratchet thread cutter with 6 cutting heads RIDGID D 286 30118 with cutting heads 12-R 1/2, 3/4, 1, 11/4, 11/2, 2 very good condition !' Dimensions: 750 x 300 x 110 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMSSZEUGFABRIK SUHL Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

Thread cutting chuck, thread chuck, tapping chuck, thread cutting apparatus -Thread cutting chuck: Thread cutting device 2 pieces -Recording: MK2 -Bore: 1x Ø14 mm / 1x Ø10 mm -Delivery/Price: complete -Transport dimensions: 163/87/H260 mm -Weight: 6.1 kg

Threaded Measuring Screw, Threaded Bracket Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 2.5 incomplete with protective box Dimensions: 255 x 110 x 35 mm

Threaded Measuring Screw, Threaded Bracket Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 50 - 75 mm M 0.7 - M 5.5 incomplete with protective box Dimensions: 300 x 130 x 35 mm

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4 -Shaft: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg

Threaded Measuring Screw, Threaded Bracket Measuring Screw Feinmesszeugfabrik Suhl Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 115 x 35 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw Feinmesszeugfabrik Suhl Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder -Type: SH 3/4 -Shaft: Ø 40 mm -Dimensions: 265/130/H160 mm -Weight: 7.1 kg

Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Thread Measuring Screw, Threaded Bracket Measuring Screw Feinmesszeugfabrik Suhl Range: 25 - 50 mm M 1 - M 5 with protective box Dimensions: 265 x 120 x 35 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 20 - 75 mm M 0.5 - M 6 204194B with protective box Dimensions: 200 x 155 x 55 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 75 - 200 mm M 0.4 - M 7.5 204194B with protective box Dimensions: 310 x 150 x 55 mm

Female thread gauge LEHRMESS SCHMALKALDEN range: 75 - 200 mm M 0.4 - M 7.5 with protective box Dimensions: 310 x 150 x 55 mm

Threaded Screw, Threaded Bracket Gauge, Threaded Screw Gauge with Fine Knife CARL ZEISS Range: 100 - 150 mm M 0.6 - M 10 Measuring Tip M 0.4 - 0.6 is missing ! with protective box used, tested ! Dimensions: 445 x 180 x 50 mm

Thread gauge, fine thread good gauge FWP M 55 x 2 Ø 100 x 26 mm used ! Dimensions: 100 x 100 x 30 mm