thread milling machine used for sale

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 135 Operating hours: 1012 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Digital readout number of ...

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Digital display Anilam Table 1250 x 350 mm Longitudinal path 850 mm Crosspath 250 mm Vertical path 470 mm Spindle speeds 45 - 2000 rpm. Recording ISO 40

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Vice Coolant system Lamp

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 10 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse:: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Digital readout number of axis:: 3 Coolant system Tool storage

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/min Z axis: 5 - 2000 mm/min W axis: 5 - 50 mm/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 100 kW Overall dimensions about: Length: 21000 mm Width: 7800 mm Height: 6622 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 250 mm Longitudinal travel (X-axis): 330 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 475 mm Spindle speeds: number (steps): 12 from: 63 rpm up to: 2800 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 4 mm/min up to: 500 mm/min vertical from: 2 mm/min up to: 200 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.2 HP Machine´s weight about: 950 kg Overall dimensions machine: Length: 1600 mm Width: 1100 mm Height: 1650 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 210 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y axis): 175 mm Vertical travel (z axis): 400 mm Distance from vertical spindle to table: 320 mm Spindle speeds: number (steps): 9 from: 60 rpm up to: 1200 rpm Taper in spindle: 30 ISO Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 216 mm/min vertical from: 12.0 mm/min up to: 216 mm/min Rapid traverse: longitudinal: 1.0 m/min vertical: 0.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 880 kg Overall dimensions machine: Length: 1100 mm Width: 1100 mm Height: 1600 mm

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Technical data Table length: 600 mm Table width: 210 mm Longitudinal travel (X-axis): 260 mm Transversal travel (y axis): 150 mm Vertical travel (z axis): 310 mm Distance from vertical spindle to table: 310 mm Distance from horizontal spindle to table: 410 mm Spindle speeds: stepless from: 58 rpm up to: 2000 rpm Taper in spindle: 30 ISO Feeds steps:: 10 longitudinal from: 12.0 mm/min up to: 400 mm/min vertical from: 12.0 mm/min up to: 400 mm/min Rapid traverse: longitudinal: 1.2 m/min vertical: 1.2 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 3.0 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 1600 mm

Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Coolant system Lamp

Control: HEIDENHAIN TNC 135 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm

Key data: 900 , 530 Dialog 11, 560

Table length: 900 mm Table width: 530 mm Longitudinal X: 560 mm Cross Y: 500 mm Vertical Z: 450 mm CNC Model: Dialog 11 X – Travel:              560mm Y – Travel:              500mm Z – Travel:              450mm Table Length:            900mm Table Width:             530mm Table load:              450Kg Feed rate X-Axis:        3.600mm/min. Feed rate Y-Axis:        3.600mm/min. Feed rate Z-Axis:        3.600mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:        7.5kW Speeds / ranges:         5000Rpm Number of controlle ...

Key data: 800 Heidenhain, 400 TNC 124, 600

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm  Weight:         2.200 kg 

Key data: 12550 , 350 , 850

Table length: 12550 mm Table width: 350 mm Longitudinal X: 850 mm Cross Y: 250 mm Vertical Z: 470 mm Make: Reiden Swiss Type: FU 150 YOP: 1980 3 Axis digital read out Rapid feed all 3 axis Power 5kW X-Axis:         850mm Y-Axis:         250mm Z-Axis:         470mm Table Length:   1.250mm Table Width:    350mm Table load:     400Kg Spindle speeds: 2000Rpm Feed rate X-Axis:2.700mm/min. Feed rate Y-Axis:2.750mm/min. Feed rate Z-Axis:1.100mm/min. Length:         2.000 mm  Width:          1.700 mm  Height:         2.000 mm  Weight:         2.000 kg 

Table length: 0 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 450 mm CNC Brand: _Unknown / Other Make: MAHO Type: MH700C Control: 432 YOP: 1989 NC Rotary table (B-Axis) 630 mm CNC 432 with handwheel Pinole 100 mm X – Travel:              700mm Y – Travel:              500mm Z – Travel:              450mm Table  Ø:                630mm Feed rate X-Axis:        6.000mm/min. Feed rate Y-Axis:        3.000mm/min. Feed rate Z-Axis:        11.400mm/min. Spindle Taper:           40ISO/Bt/Mk Speeds / ranges:         3150Rpm Number of controlled axis:3 + 1  Length:  &n ...

Key data: 1600 Heidenhain, 1000 TNC 426, 1400

Table length: 1600 mm Table width: 1000 mm Longitudinal X: 1400 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 Make: CME Type: FS-1 Control: HeidenHain TNC 426 YOP: 2002 X-Axis:         1.400mm Y-Axis:         1.000mm Z-Axis:         1.000mm Table Length:   1.600mm Table Width:    850mm Table load:     2.500Kg Power on spindle:22kW Spindle speeds: 4000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:20.000mm/min. Feed rate Y-Axis:20.000mm/min. Feed rate Z-Axis:20.000mm/min. Length:         4.260 mm  Width:          2.500 mm  Height:         2.600 mm  Weight:         9.900 kg  Swi ...

Table length: 1200 mm Table width: 305 mm Longitudinal X: 950 mm Cross Y: 290 mm Vertical Z: 475 mm CORREA - F2U-E Horizontal & Vertical Milling Machine MACH - ID 6363 Make: CORREA Type: F2U-E YOP: 1988 X-Axis    950 mm Y-Axis    290 mm Z-Axis    475 mm Table Length        1.200 mm Table Width            305 mm Spindle speeds     1800 Rpm Feed rate X-Axis       3.000 mm Feed rate Y-Axis        3.000 mm Feed rate Z-Axis       1.000 mm Length     2.800 mm Width      2.000 mm Height     2.100 mm Weight    2.300 kg

Table length: 1650 mm Table width: 360 mm Longitudinal X: 1270 mm Cross Y: 280 mm Vertical Z: 400 mm OPTIMUM - OPTImill MT 200 Universal milling machine 1290 x 280 x 400 mm MACH - ID 6340 Make: OPTIMUM Type: OPTImill MT 200 YOP: 2013 X-Axis    1.270 mm Y-Axis       280 mm Z-Axis       400 mm Table Length       1.650 mm Table Width          360 mm Table load             450 kg Spindle speeds      1750 Rpm Feed rate X-Axis      420 mm Feed rate Y-Axis       393 mm Feed rate Z-Axis       168 mm Stroke pinole             ISO 50 mm Dimensions Length       2.160 mm Wi ...

Table length: 1200 mm Table width: 228 mm Longitudinal X: 800 mm Cross Y: 400 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Teach in ProtoTRAK - SMX Teach in Teach in Milling 800 x 400 x 500 mm MACH - ID 6333 Make: ProtoTRAK Type: SMX Teach in Control: ProtoTRAK SMX X-Axis    800 mm Y-Axis    400 mm Z-Axis    500 mm Table Length     1.200 mm Table Width        228 mm Table load           600 kg Power on spindle     3 kW Spindle speeds       3600 Rpm Spindle Taper        40 ISO/Bt/Mk Control      SMX Dimensions Length     3.200 mm Width      2.800 mm Height     2.300 mm Weight     2.000 ...

Table length: 1600 mm Table width: 550 mm Longitudinal X: 1100 mm Cross Y: 700 mm Vertical Z: 500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 310 CME - FC 1100 Universal milling machine 1100 x 700 x 500 mm MACH - ID 6332 Make: CME Type: FC 1100 Control: Heidenhain TNC 310 YOP: 1998 X-Axis    1.100 mm Y-Axis       700 mm Z-Axis       500 mm Table Length       1.600 mm Table Width         550 mm Table load            300 kg Power on spindle      7.5 kW Spindle speeds         1800 Rpm Spindle Taper           40 ISO/Bt/Mk Dimensions Length      3.800 mm Width        2.800 mm Height&nb ...

Table length: 6000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 MACH - ID 6109 Make:    Nicolas Correa Type      :L30-43 Control  :HeidenHain TNC 426 YOP      :1997 X-Axis    4.300 mm Y-Axis     1.200 mm Z-Axis     1.500 mm Table Length      6.000 mm Table Width       1.000 mm Table load         10,000 kg Power on spindle        25 kW Spindle speeds         3000 Rpm Spindle Taper          50 ISO/Bt/Mk Feed rate X-Axis      15,000 mm Feed rate Y-Axis      15,000 mm Feed rate Z ...

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 350 mm Vertical Z: 400 mm CNC Brand: _Unknown / Other MACH-id       6029 MAKE            Kunzmann Germany TYPE              WF 4/3 YOP               2007 SPECIFICATIONS X-Axis         400 mm Y-Axis          350 mm Z-Axis          400 mm Table Length        650 mm Table Width         350 mm Table load            250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis        5000 mm/min. Feed rate Y-Axis        5000 mm/min. Feed rate Z-Axis       ...

Table length: 1250 mm Table width: 200 mm Longitudinal X: 600 mm Cross Y: 500 mm Vertical Z: 400 mm MACH-id      5556 MAKE          TOS OLOMOUC TYPE             FA 3 C YOP               2003 SPECIFICATIONS X-Axis       600 mm Y-Axis       500 mm Z-Axis        400 mm Table Length          1250 mm Table Width              200 mm Table load                 100 Kg Spindle speeds         2000 Rpm DIMENSIONS Length        2000 mm Width         1800 mm Height        1550 mm Weight    &nbs ...

Table length: 1800 mm Table width: 630 mm Longitudinal X: 1400 mm Cross Y: 700 mm Vertical Z: 600 mm MACH-id      5369 MAKE           TOS CZ TYPE             FGS 63 T Plus YOP               1998 SPECIFICATIONS X-Axis        1400 mm Y-Axis           700 mm Z-Axis           600 mm Table Length        1800 mm Table Width            630 mm Table load              1800 Kg Spindle speeds       4000 Rpm Feed rate X-Axis         4000 mm/min. Feed rate Y-Axis          4000 mm/min. Feed rate Z-Axis      & ...

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 320 mm Vertical Z: 400 mm MACH-id    5479 MAKE         Kunzmann TYPE           WF 4/3 YOP            2010 SPECIFICATIONS X-Axis       400 mm Y-Axis        320 mm Z-Axis         400 mm Table Length       650 mm Table Width        350 mm Table load         250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis      10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis           10.000 mm/min. DIMENSIONS Length          3000 mm Widt ...

Table length: 700 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    5459 MAKE        Deckel Maho TYPE          FP3A YOP            1991 SPECIFICATIONS X-Axis      400 mm Y-Axis      400 mm Z-Axis       400 mm Table Length       700 mm Table Width         460 mm Table load            400 Kg Spindle speeds      4000 Rpm DIMENSIONS Length       2600 mm Width         2400 mm Height        2100 mm Weight        2000 kg

Longitudinal X: 620 mm Cross Y: 420 mm Vertical Z: 380 mm Spindle taper: 0   Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC MACH-id    5450 MAKE       AVIA Poland TYPE         FNF-40 C YOP           1998 SPECIFICATIONS X-Axis          620 mm Y-Axis           420 mm Z-Axis            380 mm Table Length        800 mm Table Width     400 mm Table load        400 Kg Spindle speeds       3150 Rpm Feed rate     X-Axis     4000 mm/min. Feed rate Y-Axis         4000 mm/min. Feed rate Z-Axis          4000 mm/min. DIMENSIONS Length&n ...

Table length: 670 mm Table width: 320 mm Longitudinal X: 320 mm Cross Y: 240 mm Vertical Z: 300 mm MACH-id    5175 MAKE        VOLZ Germany TYPE          EURO-MILL FUS 22 M YOP            2007 SPECIFICATIONS X-Axis        320 mm Y-Axis        240 mm Z-Axis        300 mm Table Length       670 mm Table Width        320 mm Table load in kG       75 Kg Stroke Pinole           60 mm Spindle taper            iso 40 Mk/Bt/ISO/HSk Spindle speeds         2240 Rpm Feed rate X-Axis       630 mm/Min Feed rate Y-Axis       630 mm/Min Feed rat ...

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

Table length: 1000 mm Table width: 450 mm Longitudinal X: 1000 mm Cross Y: 450 mm Vertical Z: 600 mm CNC Brand: Heidenhain CNC Model: TNC 310 MACH-id   4184 MAKE        DUFOUR Vernier France TYPE         GD 258 TNC 310 YEAR        1999 SPECIFICATIONS X - Travel       1000 mm Y - Travel         450 mm Z - Travel          600 mm bed / plano / portal / moving column Horizontal & Vertical milling machine Controll      HeidenHain TNC 310 Table Length x Width     1000 x 450 mm Table load in kG   500 Kg Spindle Taper     ISO 40 kW power on spindle  6.6 / 9.3 kW Spindle speeds / ranges     4000 / 2200 Rpm Number off controlled axis  3  ...

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Table length: 1250 mm Table width: 600 mm Longitudinal X: 1040 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Distance between uprights: 0 mm CNC Brand: Heidenhain CNC Model: iTnc 530 MACH-id   3989 MAKE       Deckel Maho TYPE         DMC 104 V Linear YEAR        2007 SPECIFICATIONS X - Travel    1040 mm Y - Travel      600 mm Z - Travel      500 mm bed / plano / portal / moving column    Portal Controll     iTNC 530 Table Length x Width   1250 x 600 mm Table load in kG   800 Kg Spindle Taper    Sk 40 kW power on spindle   30 kW Spindle speeds / ranges    12000 Rpm ATC tool changer   30 Coolant true spindle / Bar    10 Bar Number off  ...

Table length: 1250 mm Table width: 800 mm Longitudinal X: 1000 mm Cross Y: 800 mm Vertical Z: 700 mm Positions ATC: 30   Distance between uprights: 1300 mm CNC Brand: _Unknown / Other CNC Model: Dialog 112 MAKE  Deckel Maho TYPE   DMC 100 V YEAR   1998 SPECIFICATIONS X - Travel  1000 mm Y - Travel   800 mm Z - Travel   700 mm bed / plano / portal / moving column   Portal milling Controll    Dialog 112 Table Length x Width   1250 x 800 mm Table load in kG   1250 Kg Spindle Taper    Sk 40 kW power on spindle   10 kW Spindle speeds / ranges   8000 Rpm ATC tool changer   30 Number off controlled axis   3 Distance between columns    1300 mm DIMENSIONS Length   4500 mm Width    3200 mm  ...

Table length: 1200 mm Table width: 600 mm Longitudinal X: 1000 mm Cross Y: 600 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11 MAKE  Deckel Germany TYPE    FP 6 - 100 YEAR   80 er SPECIFICATIONS X - Travel   1000 mm Y - Travel     600 mm Z - Travel     500 mm bed / plano / portal / moving column   Universal CNC milling machine Controll   DIALOG 11 Table Length x Width    1200 x 600 mm Table load in kG   600 Kg Spindle Taper   Sk 40 kW power on spindle   11.5 kW Spindle speeds / ranges   5000 Rpm Number off controlled axis   3 DIMENSIONS Length    4000 mm Width      3200 mm Height    2850 mm  

UWM BORING MILLING MACHINE TYPE 40A -MK4 -75/1600 t/m -Draait right en linksom -Tapfunctie -Boorgedeelte is in hoogte verstelbaar -Boorgedeelte is kantelbaar -Tandwielaangedreven -Beschermkap -Noodstop -Boorkop Zelfspannende -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Table length: 1400 mm Table width: 630 mm Longitudinal X: 1120 mm Cross Y: 630 mm Vertical Z: 500 mm MACH-id    372 MAKE        TOS Kurim TYPE          FGS 63 YEAR         1997 SPECIFICATIONS X - Travel    1120 mm Y - Travel      630 mm Z - Travel       500 mm bed / plano / portal / moving column          Universal conmventionel milling machine Table Length x Width   1400 x 630 mm Table load in kG     1500 Kg Spindle Taper    ISO 50 kW power on spindle    15 kW Spindle speeds / ranges     1800 Rpm DIMENSIONS Length     3700 mm Width       2500 mm Height     2700 mm  

Table length: 1230 mm Table width: 370 mm Longitudinal X: 700 mm Cross Y: 315 mm Vertical Z: 180 mm CNC Brand: _Unknown / Other MAKE  Fehlman Swiss TYPE   PICOMAX 80 3/2 YEAR   1992 SPECIFICATIONS X - Travel    700 mm Y - Travel    315 mm Z - Travel    180 mm W - Travel   495 mm bed / plano / portal / moving column CNC Milling machine Controll   HeidenHain TNC 407 Table Length x Width   1230 x 370 mm Table load in kG     250 Kg Spindle Taper    Sk 40 ? Number off controlled axis   3 DIMENSIONS Length    2150 mm Width     2400 mm Height    2200 mm

Table length: 3900 mm Table width: 1500 mm Longitudinal X: 3800 mm Cross Y: 1500 mm Vertical Z: 650 mm Positions ATC: 52   Distance between uprights: 2210 mm CNC Brand: Heidenhain CNC Model: TNC 426 MAKE   AXA Germany TYPE    UPFZ 40 YEAR   2001 SPECIFICATIONS X - Travel    3800 mm Y- Travel     1500 mm Z - Travel     650 mm bed / plano / portal / moving column   Portal milling Controll    HeidenHain TNC 426 Table Length x Width    3900 x 1500 mm Spindle Taper    Sk 40 kW power on spindle  20 / 100 % or 30 / 40 % kW Spindle speeds / ranges  100 - 15000 Rpm ATC tool changer   52 Number off controlled axis   5 Axis CNC Automatic milling head / Gr.    2.5 Gr .Distance between columns    2210 mm DI ...

Table length: 500 mm Table width: 400 mm Longitudinal X: 510 mm Cross Y: 510 mm Vertical Z: 460 mm CNC Brand: Mazatrol CNC Model: 640 M 5 X MACH-id  3538 MAKE  Mazak TYPE  Variaxis 500 - 5X YEAR  2007 SPECIFICATIONS   X - Travel  510 mm Y - Travel  510 mm Z - Travel  460 mm Controll  Mazatrol 640M 5X Table Length x Width  500 x 400 mm Table load in kG  300 Kg Spindle Taper  Bt 40   kW power on spindle  22 kW Spindle speeds / ranges   12000 Rpm ATC tool changer  40 Coolant true spindle / Bar  Yes, 20 Bar Number off controlled axis 5  

2 pieces of SCHAFFNER F.17.34 milling machines, table 750 / 180, with 2-fold vertical milling head Further: 2 pieces of SCHAFFNER 17.3 also horizontal milling possible

Table length: 730 mm Table width: 280 mm Longitudinal X: 420 mm Cross Y: 240 mm Vertical Z: 450 mm CNC Brand: Heidenhain CNC Model: TNC 355 SPECIFICATIONS X - Travel   420 mm Y - Travel  240 mm Z - Travel   450 mm bed / plano / portal / moving column   Coordinate Milling machine Controll    Heidenhain TNC 355 Table Length x Width   730 x 280 mm Table load in kG   75 Kg kW power on spindle  4 kW Spindle speeds / ranges  9000 Rpm Number off controlled axis  3 DIMENSIONS Length   2000 mm Width    1400 mm Height  2300 mm

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...