137,844 used machines on RESALE, but how to find them? Machine Search
used
GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface1400 x 600 mmDimensions (L x W x H)2,74 x 2,74 x 2,86 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z1100/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.6950 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel
used
GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsMaximum load (table centre)1000 KgDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsDrive power (40% DC)13 kWMax. torque83 NmTorque (100% DC)57 NmDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1400 x 560 mmWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 20 bar with chip conveyorProduction Package ...
used
GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,6 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque121 NmTorque (100% DC)84 NmDrive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmMaximum load (table centre)1000 KgWeight approx.6200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Option ...
used
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque121 NmTorque (100% DC)84 NmDrive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmMaximum load (table centre)1000 KgWeight approx.6200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 1 with Chip ConveyorProductio ...
used
GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 3 with Chip ConveyorProduction Package 3 Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarfPrep. 4th axis EA 510.L indirect (Heidenhain ...
used
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...
A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.
Universal Milling Machine Deckel Maho DMU 50 BJ 2004
Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spraying device Milling area: 300 x 120 mm Stroke: 115 mm Weight: approx. 200 kg
Vertical milling machine Viktor 1 1/2 VA BJ 1976
Panhans 261 Tenoner Manufacturer: Panhans Type: 261 Year: 1987 M-Nr.: 1112 Specifications: Saw: 2.6 KW, 3.000 rpm, Tooldiam.: ø400 mm, spindellength 160 mm vertical spindel: 7.5 KW, 4.000 rpm, Tooldiam.ø400 mm, tenon length 170 mm, Spindellength: 160 mm Table: Solid steel table with pneumatic product clamps 80 mm adjustable Fence: Swiveling, for angular jobs Dimensions: ca. 1.9 m 1.6 m 1.7 m, plus Tenon table: 0,50,8 Meter 600 KG Condition: Fully functional
Okoma PN 2 Tenoner Manufacturer: Okoma Type: PN2 Year: M-Nr.: Specifications: Saw: 3,0 KW, 2.800 rpm, Tooldiam.: ø400 mm, spindellength 140 mm, with revolver head for height-setting vertical spindel: 7.5 KW, Tooldiam.ø40 mm- 4.000 rpm, tenon dept max. 170 mm, Spindellength: 160 mm Table: Automatic feeding table, solid steel, with pneumatic product clamps Table height: 80 mm adjustable Fence: Swiveling, for angular jobs Dimensions: ca. 2.2 m x 1.6 m , 1.7 m hoch, plus Zapfentisch: 0,50,8 Meter Weight: 600 KG
Masterwood chisel mortiser Type: OMB1 (horizontal mortiser) Chissel: 2.2 kW electric movement with hydraulic drive stroke Table: electric sideward driven, with stops Fixation: 2 top/vertical hydraulic product clamp 2 horizontal hydraulic clamps
Verboom PN5 Left Manufacturer: Verboom Type: PN5 Left Year: Norm: EU-conformity Specifications: Saw: 2.2 KW top positioned aggregate; axial and radial positioning with analog reading Horizontal spindels: 2 2.2.kW, horizontal positioned spindels over each=other with Siko analog-digital counters for exact positioning 1st vertical spindel: Vertical spindle, 20040 mm, motor: 5,5 KW ; axial and radial positioning with analog reading 2nd vertical spindel: Vertical spindle, 120 mm, motor: 4,0 KW ; axial and radial positioning with analog reading Table: Large solid steel table with manual product clamps Length measurement: Analog cross cut fence extendable Swiveling, for angular jobs Dimensions: 3.5 (0.9+0.9) 1,6 m
CNC mortising milling machine MASTERWOOD OMB1 CN3KF • Year : 2005 • Working dimensions: 5600 × 300 mm • Numerical control: SINCRO on Windows PC • Router head: 4 kW • Vertical bar presser for top routing • Digitally controlled retractable backgauges • Table with motorized belt and side stops• Motorized vertical loader and side unloader• Automatic horizontal press (20–220 mm) • Vertical press (18–160 mm) – working up to 33 mm from the milling pin • Power supply : 400 V / 13.4 A / 50 Hz • Weight : 2000 kg Auction-ID: A1-50215-36
For sale is a single-spindle copy milling machine from Elumatec, type AS 70/44, built in 2007. The machine was overhauled in the workshop (almost overhauled). As part of the overhaul, the following new spare parts were installed: - both bearings on the spindle, - both bearings on the engine, - Straps, - all linear bearings (10 pieces), - Gas pressure spring, - Both clamping cylinders including rubber buffers - Copy lever, - Öler (Festo), - Pressure reducers (Festo), - Foot valve with protective tube, - Clamping lever (5 pieces), - Copy scales, - CEE plug, - all hoses and plugs. In addition, the large horizontal and two vertical shafts were re-chromed. Most of the galvanized parts were re-galvanized. All information without guarantee. The price quoted is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site ...
x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...
• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm • Incl. 3-axis digital readout manufactured by HEIDENHAIN
With six slots and an attached vise, jaw width: 100 mm.
Attention: without the machine vises seen in the photos! • incl. three axis digital read out • incl. universal milling head
• Table with 7 slots • Incl. 3-axis digital readout manufactured by HEIDENHAIN
Table dimensions 2700 x 850 mm AFK bi-rotary head with 2.5° A and B shaft Auction-ID: A7-50261-1
60 tool positions, tool clamping force 25 kN, control voltage 24 V, main fuse 160 A, connected load 60 KVA, rapid traverse/feed X/Y/Z axis each 20000 mm/min with 15000 N Auction-ID: A1-50260-7
x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 350 mm y-travel: 260 mm w-axis: 450 mm z-axis: 110 mm tool taper: SF 32 Quickchange-System turning speed range - stepless: 50-6300 U/min table surface area: 670 x 320 mm table load: 0,2 t feed range - table: manuell mm/min feed for quill 1:: manuell mm/U total power requirement: 2,9 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: BTH 1,47 x 1,34 x 2,10 m Infinitely variable electronic spindle speed control: 50–6,300 rpm (with 5 memory presets) Power: 2.9 kW (100%), 40 Nm max. Clockwise/counter-clockwise thread cutting Adjustable quill depth stop Precision height adjustment with fitted column wedge Includes machine base with integrated tool cabinet Fine depth feed via handwheel Precision coordinate table incl. direct measuring system Heidenhain digital position display Swiveling tool rack for 12 SF32 tools Incl. Heidenhain digital readout Incl. coolant pump ...
milling machine, year 1998, CNC 2400. Used machine. More info & price on IndustrialBuyer.
Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
MTE” FIXED BED MILLING MACHINE Mod. BF-1700 FEATURES: CONTROL UNIT: • Model: TNC 410 • Brand: HEIDENHAIN MAIN TRANSMISSION: • Spindle speed range: 40 – 2500 rpm • Max spindle speed: 3000 rpm • Taper: SK 50 TRAVEL: • X-axis travel: 1500 mm • Y-axis travel: 1000 mm • Z-axis travel: 1000 mm WORK TABLE: • Table length: 1700 mm • Table width: 1000 mm • Max table load: 5500 kg
MTE” FIXED BED MILLING MACHINE Mod. BF-2700 CARACTERISTICS: • MACHINE LENGTH: 7000 MM • MACHINE WIDTH: 3000 MM • MACHINE HEIGHT: 3000 MM CONTROL UNIT: • MODEL: TNC 410 • BRAND: HEIDENHAIN MAIN DRIVE: • SPINDLE SPEED RANGE: 3000 1/MIN • SPINDLE TAPER: SK 50 TRAVELS : • X-AXIS TRAVEL: 2500 MM • Y-AXIS TRAVEL: 1000 MM • Z-AXIS TRAVEL: 1000 MM WORKING TABLE: • EXTERNAL LENGTH: 2700 MM • EXTERNAL WIDTH: 1000 MM • POWER CONSUMPTION: 40 KW
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
8 pieces diameter 16 mm; 4 pieces diameter 20 mm; 2 pieces diameter 32 mm; unused and in original packaging Auction-ID: A1-49785-198
2 pieces diameter 63 mm; 2 pieces diameter 100 mm; 1 piece diameter 125 mm; 1 piece diameter 160 mm Auction-ID: A1-49785-136
Incl. peripherals and documents Dismantled for transport Video available! Auction-ID: A1-40982-13
Control Conventional Horizontal/vertical Horizontal and vertical Power [kW] 3.0 Number of axles [pcs.] 3 X-axis travel [mm] 400 Y-axis travel [mm] 300 Z-axis displacement [mm] 400 Table length [mm] 750 Table width [mm] 300 Tool holder SK40 Main spindle power [kW] 2.2 Min. spindle speed [rpm] 40 Max. spindle speed [rpm] 1600 Options Digital readout └ Type of digital readout Heidenhain Auction-ID: A1-40982-30
x-travel: 1250 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Brand: Friedrich Deckel, Munich Type: FP1 Serial Number: 35968 Features: universal milling machine with vertical and horizontal spindle head, adjustable height, cross table with handwheels on X/Y, protective cover/splash guard above the spindle Speeds and feeds (type plate cutting data) Horizontal spindle speeds (positions I/II): 60-1200 rpm in multiple steps (60, 95, 120, 150, 190, 235, 300, 375, 475, 600, 750, 1200) Vertical spindle speeds: 95-1900 rpm in steps (95, 120, 150, 190, 235, 300, 375, 475, 600, 750, 950, 1200, 1900) Feed (mm/min): from 0 to 475 mm/min in several steps, adjustable both horizontally and vertically via lever positions Cutting speed diagram (m/min) present on nameplate for cutter diameters 4 to 130 mm Associated fate Cabinet with attachments/parts is offered with this machine Auction-ID: A3-46126-11324
X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible.
maximum number of results exceeded
please refine your search
100 € 
