thread milling machine used for sale

Machine number: 344169 Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connection: 12 kVA Control: HEIDENHAIN Table dimensions: 650 x 350 mm with 5 grooves Groove spacing: 63 mm Max. load: 250 kg Travel X-axis: 400 mm Travel Y-axis: 320 mm Travel Z-axis: 400 mm Max. distances top of the table to horizontal spindle center: 140 - 540 mm Top of the table to vertical head bottom edge: max. 430 mm Tool holder: SK 40 Speed: from 0 - 4000 rpm Quill stroke vertical: 60 mm Vertiakl head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/min Rapid traverse longitudinal and transverse: 5 m/min Feed vertical: 0 - 2000 mm/min Rapid traverse vertical: 4 m/min Auction-ID: A7-49089-475

Machine number: F39455 Operating voltage: 400 V Control voltage: 230 V Frequency: 50 Hz Rated current: 100 A Connection: 50 kVA Control: SIEMENS SINUMERIK 840 C Travel X-axis: 5000 mm Travel Y-axis: 1200 mm Travel Z-axis: 1000 mm Rapid traverse: 0 - 10 m/min Feed: 0 - 4 m/min Speed: from 20 to 2800 rpm Milling head position vertical/horizontal/middle/horizontal right/horizontal left/horizontal top Universal milling head particularly suitable for milling with 5-fold spindle positioning Drilling Table dimensions: 3750 x 1250 mm with 9 grooves Tool holder: SK 50 Rotary table dimensions: 1250 x 1250 mm with 9 grooves and an attached RÖHM three-jaw chuck, diameter: 500 mm incl. large batch of clamping devices and a large batch of SK 50 tool holders, corresponding carriers incl. 60-fold tool changer incl. the tool holders in the tool changer shown in the photos incl. chip conveyor and coolant ...

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-8

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

Huvema X: 790 - Y: 420 - Z: 420 mm Max longitudinal travel X-axe: 790 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 420 mm Max height workpiece: 440 mm Power on spindle: 3 HP Max quill travel Z´: 127 mm Admission in boring head (ISO): ISO 40 Spindlespeeds: 50 > 3750 rpm Table size: 1300 x 260 mm Digital screen: yes Weight: 1760 kg

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm tool taper: SK40 spindle turning speed range: 110 - 1230 U/min table-size: 270 x 700 mm total power requirement: 3,7 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 1400 x 1400 x 1700 mm Features: - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12000 mm y-travel: 3600 mm z-travel: 1600 mm spindle turning speed - stepless: 5000 U/min spindle motor: 34 kW table-size: 13000 x 2500 mm feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 30 m/min no. of tools in the magazine: 100 Stück control: HEIDENHAIN TNC 640 total power requirement: 60 kW weight of the machine ca.: 88 t - CNC Control Heidenhain TNC 640 - Universal Milling Head, Automatic A/B Axis, MILLESIMAL POSITIONING - ATC for 100 tools (ISO 50) - Rotary Table 1500X1500mm, 15t - MOBILE WORKING PLATFORM - PERIMETER FENCES - STATIC RTCP OF ROTATING TABLES - STATIC RTCP IN THE SPACE - AUTOCAL - Vibration Detection Probe - Green Mode Function - Chip Conveyor - Laser Tool Setter - Coolant with Paper Band Filter (High-Pressure 40bar) - Touich Probe - Portable Handwheel Power On: 12400h, Machine ON: 6300h, Program Run: 3950h, Spindl ...

Key data: 2800 mm, 1000 mm, 1000 mm

CNC Bed Milling Machine Manufacturer: Zayer Year of manufacture 1989 Control Heidenhain TNC155 Monitor has already been replaced Table size 800 x 3000mm Travel X/Y/Z 2800/1000/1000 24 Way Tool Changer Tool holder SK50 Head swivels over program The machine is in a 100% functional condition. Machine is sold from the Saarland Illingen site. Loading can be done by us for an extra charge

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

SK40 milling head, with flange, with quill and tool clamping, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

Milling cutters, end mills, drop cutters, reamers, unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills ! Also have items with SK40 .

For sale is a REFORM UWF 32 D universal milling machine, built in 1996, in a robust industrial version. The machine is equipped with a HEIDENHAIN 3-axis digital display and has a generous milling table of approx. 800 × 400 mm. Thanks to its solid conventional design, it is ideally suited for tool and machine construction, maintenance, repair work, as well as the production of individual parts and small series. The machine is in a good used, age-appropriate condition. Signs of use and paint wear are present and can be seen in the pictures. Technical data Manufacturer REFORM Model / Type UWF 32 D Machine type: Universal milling machine Year of manufacture 1996 Serial No. 11.031 Power 1.87 kW Table size approx. 800 × 400 mm Digital display HEIDENHAIN Display 3 axes Operation conventional / manual Milling head vertical version Router Table T-slot Table Machine vi ...

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)

Maho MH 1000 S X: 1000 - Y: 560 - Z: 800 mm CNC Max longitudinal travel X-axe: 1000 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 800 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 1250 x 800 mm Control: Philips 432 Length: 4600 mm Depth : 2500 mm Height: 2300 mm Weight: 7,5 ton Toolholder: yes

bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 400 mm z-travel: 350 mm table-size: 920 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 40 - 2000 U/min quill stroke: 50 mm total power requirement: 2,4 kW weight of the machine ca.: 1,1 t dimensions: 1,4 x 1,6 x 2,1 m Equipment: - Heidenhain digital readout - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brass blank, brass plate, sides milled, L-345mm, W-230, H-70mm, weight: approx. 48kg. Price: Euro 480,-, net ex works !

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions

Deckel FP2 Milling Machine Component Type: Milling machine component Manufacturer: Deckel Model: FP2 Length: approx. 100 cm Height: approx. 31 cm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-59

Hexagon M&H RWP38 – Tool Setting Probe 3D ISO50 Auction-ID: A1-49922-67

Model: VP-2016 Machine Type: CNC Vertical Machining Center (likely gantry/portal style based on earlier photo) Origin: Plate suggests Asian manufacture (likely Taiwan/China OEM) Electrical Specifications Voltage (A.C.): 380 V ±10% Phase: 3-phase Frequency: 50 Hz Installed Power: 55 kVA Hydraulic & Pneumatic Hydraulic Pressure: 75 kg/cm² (~73 bar) Air Pressure: 5 kg/cm² (~5 bar) Tool clamping ATC operation Counterbalance / auxiliaries Machine Weight: ~25,000 kg (25 tons) Heavy-duty structure Likely gantry / bridge-type machining center Travels X: ~2000 mm Y: ~1600 mm Z: ~1000 mm Spindle Taper: ISO 50 Speed: 6,000 rpm Power: ~15 – 30 kW Tooling Automatic tool changer (ATC) Magazine: typically 40 tools Structure Fixed table, moving gantry or column Designed for: Molds & dies Medium-large plates Structural parts Auction-ID: A1-49922-15

YUNNAN 2M6015 Milling Cutter Sharpening Machine Type: Milling cutter sharpening machine Manufacturer: YUNNAN Model: 2M6015 Serial number: 800111 Accurate and adjustable sharpening system Fine adjustment of cutting angles Adjustable worktable Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-35

Year of manufacture 2010 TOP condition! Siemens Control Spindle 18000 rpm 10610 Spindle hours Tool changer for 30 tools IKZ el. Handwheel Chip conveyor

Used machine DMF200/8 Machine type: Universal milling center Model No.:DMF200/8 Manufacturer: DMGMORI Control: CELOS with Siemens 840D sl Operate Year of manufacture: 2023 Location:Germany Equipment: - Travelling column milling machine DMF 200/8 - NC swivel milling head (B-axis) - Motor spindle speedMASTER® - Tool holder SK40 DIN - Spindle speed 20 - 15,000 rpm 21 kW/16 kW - Chain magazine for 40 tools, - Chip conveyor (scraper belt) - Fixed table with integrated rotary table - Internal coolant supply 40 bar/600ll with paper belt filter - Oil and emulsion mist separators - Blowing air through the spindle center - Infrared probe PP60 optical - 3D quickSET - Laser tool measurement Blum LC50 Technical data Travel range X-axis approx. 2000 mm Y-axis approx. 800 mm Z-axis approx. 850 mm B-axis (head) +-120° ° Rotary table in table 800 mm Table size appro ...

Number of axes: 5, max. spindle speed: 50,000rpm, spindle taper: HSK E25, working area dimensions: 410x294x210mm, table dimensions: 450x300mm, T-slots: 12mm, spacing: 50mm, max. workpiece weight: 100kg, feed rate: 0-42,000mm/min, tool changer positions: 18 (linear), max. current consumption: 18A, connected load: 10kVA, length: 1995mm, width: 2480mm, height: 2080mm, weight: 3.2t, operating hours: 57,869h, spindle hours: 1,797h, an on-site inspection is possible.

Key data: 800 mm, 300 mm, 630 mm

Universal Milling Machine GAMBIN 11 M Travel X: 800 mm Travel Y: 300 mm Travel Z: 630 mm Cone: SA 30 Spindle speed: from 25 to 1800 RPM Table size: 1300 x 300 mm Horizontally + vertically tilting head Spindle motor: 4,8 KW Auto Feeds X - Y - Z Spindle body exit: 240 mm Lubrification Voltage: 380 V Width: 2000 mm Depth: 2100 mm Total height: 1800 mm Weight: approx 2,2 T

Key data: 1000 mm, 300 mm, 600 mm

Universal Milling Machine VERNIER type FV Travel X: 1000 mm Travel Y: 300 mm Travel Z: 600 mm Cone SA 40 Spindle speed: from 32 to 1500 RPM Table size: Length 1500 x Width 320 mm Horizontally + vertically tilting head Scale 3 axes ACURITE Feeds auto X - Y - Z Length: 2200 mm Depth: 2100 mm Total height: 1900 mm Weight: approx 2,5 T

Key data: 20000 mm, 7900 mm, 2500 mm

CNC Gantry Milling Machine Waldrich Coburg PowerTec 4500 Built in 1999 with Siemens 840C CNC control X 20,000 mm (longitudinal gantry) Y 7,900 mm (transverse travel of the milling ram) Z 2,500 mm (vertical travel of the milling ram) W 2,500 mm (transverse beam perpendicular) Distance between uprights 4,380 mm Distance from spindle to table max. 4,000 mm Spindle overhauled in 2023 Spindle motor power 105 KW Spindle speeds 2 – 2,500 rpm (2-stage gearbox) Torque S1 9,000 Nm Spindle holder ISO 60 / ISO 50 405-speed tool changer 5 milling heads Universal milling head automatic indexing 1° / 1° Offer number V(F)-7155

Key data: 800 mm, 300 mm, 500 mm

Milling Machine VERNIER FV 250 E Travel X: 800 mm Travel Y: 300 mm Travel Z: 500 mm Cone: SA 40 Spindle speed: from 45 to 2000 RPM Table size: 1060 x 250 mm Horizontally + vertically tilting head Auto Feeds X - Y - Z Lubricant pump Voltage: 380 V Width: 1600 mm Depth: 2000 mm Total height: 1700 mm Weight: approx 2 T

x-travel: 8000 mm y-travel: 1250 mm z-travel: 1250 mm table-size: 1250 x 8000 mm workpiece weight: 40 t spindle travel: 240 mm max. passage: 1600 mm spindle taper ISO: 50 total power requirement: -- kW total wight: -- t dimensions of the machine ca.: -- m overhauled in 2007 and equipped with digital display - 2 milling supports - 1 side support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm digital readout: 3 Achsen HEIDENHAIN spindle taper ISO: 40 spindle turning speed range: 40 - 2000 U/min quill stroke: 60 mm feeds -stepless-: 5 - 500 mm/min table-size: 600 x 210 mm rapid traverse: 1200 mm/min power capacity: 1,6 - 2,0 kW table load: 200 kg voltage: 400 V weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,15 x 1,15 x 1,65 m electric cabinet: 0,60 x 0,35 x 0,90 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20 ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 3,56 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)43 NmMax. torque64 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...

x-travel: 560 mm y-travel: 300 mm z-travel: 420 mm digital readout: 3 Achsen HEIDENHAIN table-size: 1100 x 250 mm spindle turning speed range: 40 - 1180 U/min spindle taper ISO: 40 feeds: 18 - 384 mm/min milling motor: 3,7 kW coolant: voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,45 x 1,70 x 1,90 m - Serial-No.: 6760 - 3-axis digital readout HEIDENHAIN - rapid traverse - central lubrication - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

We currently have several heavy-duty CNC machines available for sale: Leistritz LWN 300 PM - 2011 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Used, working condition Leistritz PW 190 HP – 2008 CNC Profile / Whirling Machine • 8,000 mm working length • Currently set up for whirling • Siemens SINUMERIK / SIMODRIVE Leistritz PW 300 PM – 2009 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Currently out of service due to a C1 rotational-axis motor requiring replacement • Replacement motor is already available on site Weingärtner Finish 450–8000 – 2014 CNC Polishing / Finishing Machine • 8,000 mm working length • Up to approximately 340 mm workpiece diameter • Flexium NCK control • Used, working con ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

We currently have several heavy-duty CNC machines available for sale: Leistritz LWN 300 PM - 2011 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Used, working condition Leistritz PW 190 HP – 2008 CNC Profile / Whirling Machine • 8,000 mm working length • Currently set up for whirling • Siemens SINUMERIK / SIMODRIVE Leistritz PW 300 PM – 2009 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Currently out of service due to a C1 rotational-axis motor requiring replacement • Replacement motor is already available on site Weingärtner Finish 450–8000 – 2014 CNC Polishing / Finishing Machine • 8,000 mm working length • Up to approximately 340 mm workpiece diameter • Flexium NCK control • Used, working con ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

We currently have several heavy-duty CNC machines available for sale: Leistritz LWN 300 PM - 2011 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Used, working condition Leistritz PW 190 HP – 2008 CNC Profile / Whirling Machine • 8,000 mm working length • Currently set up for whirling • Siemens SINUMERIK / SIMODRIVE Leistritz PW 300 PM – 2009 CNC Rotor Milling / Hobbing Machine • 8,000 mm working length • Currently configured for milling / hobbing • Currently out of service due to a C1 rotational-axis motor requiring replacement • Replacement motor is already available on site Weingärtner Finish 450–8000 – 2014 CNC Polishing / Finishing Machine • 8,000 mm working length • Up to approximately 340 mm workpiece diameter • Flexium NCK control • Used, working con ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel