thread grinding machine used for sale

workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread rolling machine ORT RP18 B 2-roll, overhauled, LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine UPW 25.1

Five older Mikron thread milling machines are available: 2x Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01, and 1x Mikron 106.01. An on-site inspection is possible.

Thread rolling machine, ESCOFIER H20Z, 2-roll, 2 moving heads (in sync), 2 - 20 Ton rolling pressure, workpiece diameter: 75mm max., tool diameter: 140-200 mm, Max plunge width 160 mm, Shafts dia: 69.95, Swivelling: +/-6°,, New: 2003, under power in our warehouse, M i M u machine tools

Inv. Num. : 8649 Type: R16A-II Producer: TSUGAMI Generated: Parameters: Rolling force: 160 kN Max. diameter: 75 mm Max. length: 150 mm Weight: 2500 kg

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

General Manufacturer: Monnier & Zahner Type: M651 Year of Make: 2007 Control: Fanuc Series 21i MB Travels: X 80 mm, Z 250 mm, A swivel axis +/-45°, W 250 mm Other axes: C-axis workpiece spindle, V-axis loader Working spindle Speed: 3,000 rpm Dimensions and weight Dimensions: 2,400 mm x 1,410 mm x 2,250 mm Weight: approx. 2,400 kg Condition Condition: Used Functional: Tested and fully functional

Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-44803-343

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-44803-205

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

diameter range 10-24 mm Forging power 7-20 to thread length plunge method 195 mm daylight 160 mm max. pitch 3,5 mm roller bore 80 mm roller width 235 mm roller length 195 mm

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

vibratory feeder diameter range 3-8 mm shaft length under head 150 mm max. thread length 80 mm output pieces/min 400

diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

FRUSCH – Tie Rod Threading Machine General data: Manufacturer: Frusch Machine type: Tie rod threading machine Maximum diameter: 125 mm Weight: approx. 1000 kg Dimensions (L x W x H): approx. 1800 x 1250 x 1900 mm Description: Industrial threading machine designed for processing tie rods and similar cylindrical components. The machine allows precise and efficient threading operations, making it suitable for heavy-duty industrial applications. Auction-ID: A7-45351-23

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of pressure (Ton), speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

a threading machine > - Manufacturer: Rothenberger > - Model: Supertronic 4 SE > - Age: approx. 1 year > - Condition: Very good, technically perfect, little used > - Accessories: 2 threading heads included > - Invoice: available

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

Various threaded rollers

Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg

Threaded drilling machine with up to 10 spindles, adjustable drilling pattern