thin used for sale

Automatic internal coating system for thin tubes from 2mm diameter For up to 6 tubes at the same time – up to approx. 120cm in length

Thin section creel NEVA type Orbit Plus TR 88 • Cutting height (mm): 250

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly

Peddimax 1002 combi punch/shear/notching with CNC Siemens X amp; Y positioning table for punchstation with CNC MPS pushfeed system gt; 6 meter for auto cutting flat steel (with hydraulic workpiece clamping) with conveyor belt for cut pieces central lubrification Dia x sheetthicknessdia: dia 31 in 25 mm / dia 90 in 10 mm Depth of throat 510 mm Max hole dia. Ø 90 mm Max cutting-thickness in plate: 500 x 20 mm Blade length 510 mm 90°-cut corner 150 x 150 xnbsp; 12 mm 45°-cut corner 100 x 100 x 12 mm Cut to length round/square 50 mm Max material -thickness by notching: 90 x 52 x 13 mm Punching pressure: 100 ton Power needed: 11 kW Length: 1980 mm Depth: 1020 mm Height: 2060 mm Weight: 3 ton

Section Cutting - round bar: 50 mm - square bar: 50 mm - C amp; I profiles: up to 160 mm Notching - rectangular: 52 mm - material thickness: 13 mm Punching - 33 x 20 mm - 30 x 20 mm - 55 x 12 mm - 38 x 15 mm - bending cap: 250 x 20/10 mm Shearing Flatbar - 380 x 20 mm - 480 x 15 mm - angletrim: 120 x 15 mm Angle Cutting - at 90°: 150 x 15 mm - at 45°: 80 x 10 mm Punching pressure: 85 ton Max sheet thickness by punching + nibbling: 33 x 20 mm Max punching dia: 55 x 12 mm Length: 1830 mm Depth: 790 mm Height: 1920 mm Weight: 2620 kg

max plate dimensions: 1005 x 500 mm toolchanger with 10 positions max 120 str/min with large selection of tools! Punching pressure: 20 ton Max sheet thickness by punching + nibbling: 6 mm Max punching dia: 40 mm Length: 2300 mm Depth: 1700 mm Height: 1900 mm Weight: 4,5 ton

with CNC X amp; Y positioning table for punchstation equipped with 3 punching units which can be selected with the CNC control Fagor Electric backgauge for flat shear Punching cap: 100 ton Dia x sheet thickness: 31 x 26 mm / dia 100 x 8 mm 28 strokes/min Depth of throat: 610 mm Max hole dia: Ø 100 mm Max cutting-thickness in plate: 600 x 15 mm /nbsp;400 x 20 mm Blade length: 605 mm 90°-cut corner: 152 x 152 x 13 mm 45°-cut corner: 70 x 70 x 7 mm Cut to length round/square: 50 mm Max material thickness by notching: 90 x 52 x 13 mm Power: 9 kW Weight: 3,3 ton

Model: Super 210 - 20 (electro mechanical) with electric backgauge with feed-in table with large selection of tools Punching cap: 100 ton Dia x sheet thickness: 30 xnbsp; 25 mm / 90 x 8 mm Max cutting-thickness in plate: 250 x 20 mm Blade length: 300 mm 90°-cut corner: 160 x 100 x 15 mm 45°-cut corner: 150 x 100 x 14 mm Cut to length round: 55 mm Cut to length square: 50 mm Max material thickness by notching: 16 mm Length: 2250 mm Depth: 1210 mm Height: 2420 mm Weight: 4250 kg

force: 80 ton punching cap: dia 25 x 23 mm / dia 50 x 12 mm stroke: 100 mm depth of throat: 310 mm power: 7,5 HP

with hydraulic plateclamp for shear Punching cap: 80 ton Dia x sheet thickness: 40 xnbsp; 15 mm / dia 60 x 10 mm Depth of throat: 510 mm Max cutting-thickness in plate: 500 x 20 mm /nbsp;400 x 19 mm Blade length: 510 mm 90°-cut corner: 120 x 120 x 13 mm 45°-cut corner: 90 x 90 x 10 mm Cut to length round: 45 mm Cut to length square: 40 mm Max material thickness by notching: 90 x 10 x 13 mm

punching force: 110 ton punching froce with Multi tool: 60 ton max punchingnbsp;capacity: dia 32 x 16 mm max punchingnbsp;capacity with Multi tool: dia 32 x 12 mm max punching capacity for big holes: dia 100 x 8 mm adjustable stroke: 80 mm adjustable stroke with Multi tool: 30 mm nbsp; Punching pressure: 110 ton Power needed: 9,5 kW Length: 3465 mm Depth: 1935 mm Height: 1900 mm Weight: 4400 kg

Power in tons 20 T Metal length 1275.0 mm CNC type MNC 4000 Metal width 1025.0 mm Max steel thickness 6.4 mm Many accessories/tools come along with machine User manuel and documentations are available

Type: 115XS Punching cap: 115 ton Dia x sheet thickness: 34 xnbsp; 26 mm / 55 x 16 mm Max cutting-thickness in plate: 380 x 25 mm Blade length: 610 mm 90°-cut corner: 150 x 18 mm 45°-cut corner: 80 x 10 mm Cut to length round: 55 mm Cut to length square: 55 x 55 mm Max material thickness by notching: 13 mm Power: 7,5 kW Punching pressure: 115 ton Length: 1880 mm Depth: 790 mm Height: 1990 mm Weight: 3,1 ton

DSB Singlehead NG XM / DSB 350 series Rated power of the main drive 32 kW Connection voltage 3 AC 400V / 50 Hz 3 AC 480V / 60 Hz 3 AC 575V / 60 Hz 3 AC 210V 50 / 60 Hz Max. cutting width 350 mm Band saw blade tension servo-pneumatic Band gear adjustment (band gear visible in the sight glass) Automatic adjustment of the belt run Feed speed, continuously adjustable (depending on Depending on the type of wood and dimension of the block) Standard feed rate: from 4 to 20 m/min Precision feed rate: from 1 to 15 m/min High-speed feed: from 8 to 45 m/min Band saw speed, infinitely adjustable Up to 60 m/s Diameter of band saw guide discs of band saw 915 mm Adjustment of band saw cutting height From 1.7 to 165 mm Band saw blade guide with increased durability Durability Carbon guide Compressed air connection Working pressure 7 bar Water connection 1/2 Cdooj7rci Required su ...

We sell 1200 x Lenovo ThinkCentre M92P, M93P, M72E In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from all these manuf ...

General SKU345S695 LocationBarneveld MakeGIG Grill & Grossmann (A) No.5049 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure shell6 Bar Main Features MaterialStainless steel Motor11 KW Surface7 m2 Specified Features - Film evaporator MaterialStainless steel 1.4571 (316Ti) Film evaporatorthin / wiped Notified body(DWBV) Heating surface7,0 m2 Capacity1500 Ltr Rotor sizesdia.584mm x3837mm Product inletDN25 Product outletDN150 Vapour outletDN300 With jacket(170 Ltr) Max. temperature-10/200 °C Rotor with fixed bladescheck Number of blades6 Motor11 KW, 400/690 Volt (EExDE II CT4) Information Total height7,4 M ATEX compatiblecheck Extra SpecificationsThe drive is equipped with a new John Crane mechanical seal. With:  : - 345S697(506.13): Barriquand Platular IJS - Shell and Tube Heat Exchanger - 345S699(506.15): Shell ...

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

Technical data: - max. workpiece dimensions 300 x 250 mm- min./max. Distance from the saw belt to the conveyor belt 4 - 125 mm- wide conveyor belt 285 x 5470 mm wheel diameter 711 x 51 mm- min. workpiece length 200 mm- feed speed infinitely 0 - 25 m/min. (standard:15 m/min., optional: - Sawband dimension 4267 x 51 mm- drive motor 15.0 kW- Hydraulic motor 2.2 kW- motor Height adjustment 1.5 KW- voltage 400 V / 50 Hz- Suction nozzle 4 x 100 mm- cooling device- pneumatic Discontinuation roller in the inlet with shock absorber pneumatic pressure roller for precise sawing - the combination of thin saw band and precise sawband guide enables the production of extremely thin lamella thicknesses at min. slat thicknesses of 1.0 - 2.0 mm- smooth, glueable saw cut- saw band cutting joint from 1.2 - 1.6 mm (50% material saving) - Schmitt accuracy +/- 0.5 mm- PLC control with user-friendly touchscreen ...

Automatic gas-atmosphere exchange system and ultra-high-vacuum-high-temperature furnace for thin tubes for molecular cleaning at 12 stations for thin tubes from 2mm diameter to 120cm in length and conditioning or replacing the gas atmosphere inside the tubes in one pass

Thin-cutting frame saw ORBIT Plus . The ORBIT Plus thin-cutting frame saw uses a new method of up/down movement of the saw frame for slat production. During the downstroke of the saw frame, the cutting process is absolutely straight. At the lower end of the stroke, the saw frame swings out of the cutting process in the direction of the wood feed. As soon as the saw frame has swung out of the cutting process, the upward stroke begins, whereby the saw frame remains swung out to the upper end of the stroke and does not come into contact with the wood. Use: parquet and technical floors, doors, windows, stairs, furniture, musical instruments, pencils, sports equipment (skis, snowboards, hockey sticks), wooden packaging for fruit and vegetables, etc.

Laser cutting machine Trumpf TruLaser 3030 with TruStore 1030 and SortMaster - Laser power 5000 watts. - Year of construction 2010 - Thin Sheet Productivity Package - Nozzle changer - Cross conveyor belt - Tilting container for transverse conveyors - LiftMaster Store - Extension Sort (1000 x 600) - Extended partial removal from 600 x 600 - Integrated sheet metal alignment - Separating thin sheet - Sliding gate bifly - SortMaster - Rotary unit + extended partial removal 1000 x 600 infinitely variable - Additional gripper long parts - Extension of magnetic suction - TruStore 1030 - Storage/retrieval station with trolley - 10 layer compartment 90mm + pallet - 5 pallet bottoms - Saulenverkleidung - Warehouse interface Available from the end of the year or at the beginning of next year. Errors in the technical data and prior sale excepted.

Vertical form and fill machine to do Quad-Seal-Bags. Can be operated in slanting or vertical position to allow protection of easy breakable products like thin deep frozen food, thin sugar or bakery products, etc. SIEMENS PLC, large colour touchscreen, servo motor film pulling, easy change of film roll. - Specifications: filling volume: 100-5000ml | bag size: L(150-480)xW(90-160)xD(50-100)mm | max. speed of the machine in neutral: 60 cycles/minute | film material: OPP/CPP, POO/CE, PET/PE, etc | 380V, 7.5kW | 0.6m?, 6bar | machine dimensions: L1700xW950xH1900mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediate ...

Vertical form and fill machine to do pillow bags. Can be operated in slanting or vertical position to allow protection of easy breakable products like thin deep frozen food, thin sugar or bakery products, etc. SIEMENS PLC, large colour touchscreen, servo motor film pulling, easy change of film roll. - Specifications: filling volume: 100-5000ml | bag size: L(150-480)xW(100-320)mm | max. speed of the machine in neutral: 60 cycles/minute | film material: OPP/CPP, POO/CE, PET/PE, etc. | 380V, 7.5kW | 0.6m?, 6bar | machine dimensions: L1700xW950xH1900mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...

working area: 3000x1500 mm : 20 mm : 15 mm : 10 mm max. workpiece weight: 900 kg : 4000 W Machine comes WITHOUT LIFTMASTER! Standard equipment Machine: - Closed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 19 touch colour screen - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine Cutting head: - Lens cutting head with 250mm focal length - Universal quick-change device (UTI) - LensLine with condition check - ControlLine: Height control and sheet outer edge detection - Lens with RFID chip Control system: - SINUMERIK 840D SL control system - Simple workshop programming - Fast post-product ...

Key data: 6500 mm, 2000 mm, 6000 W

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

The DSG Notum thin-cutting creel from Wintersteiger is a modern and powerful machine that is used in the Wood industry is used for the precise cutting of thin slices from logs or wooden planks. this device was specially developed to cut the thinnest layers of wood or slats (sawn veneer) with high speed and precision to cut and is used in various applications such as the production of veneers, parquet floors and furniture Mission. The machine is used but in exceptionally good or almost new condition., cutting height: Max. 260 mm, cutting width: Max. 160 mm, stroke: 210 mm, number of strokes: 450 strokes/min, Slat thickness min.: 1,5 mm, engine: 11 kW, Connected load: 14,1 kW, Construction year: 2013, Further data: On demand

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

TRUMPF laser machine model TruLaser 3030 (L20). Year of release: 2017. Country of origin: Switzerland 3200W TruFlow CO2 source with optimized standby. Processing area: 3000 x 1500 mm. RotoLas pipe cutter including 4 inner and outer jaws. Thin Sheet Processing Performance Package (High Speed, Standard and Air Compressed Thin Sheet Cutting; including 130mm Lens).

Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140m3 - Mixing and equalisation tanks 2, 40m3 - Mixing and equalisation tanks 3, 80m3 - Bioreactor 1, 240m3 - Bioreactor 2, 240m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100m3 - Secondary sedimentation tank 2, 100m3 - Thin sludge tank, 70m3 - Thick sludge tank, 90m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25m3 - Various process water pumps, Bioreactor capacity 2 x: 240 m3, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x  ...

1 piece dosing filler type K 12”, - without control cabinet, for filling thin or viscous products into glasses., Glass size: 28 g glass Ø 44.5 x 51.4 mm height TO 43, Product: fruit spreads, jams, ketchup, mustard etc., Product pieces: up to 10 x 10 x 10 mm, Filling temperature: up to approx. 85°C, Dosage range: 25 to 250 ml, Performance: depends on product and glass size, up to approx. 120 fillings / min., Product tank: 120 liter capacity instead of 45 liters, The dosing filler is specially designed for filling thin and thick liquid as well as pasty products, suitable. It can be a partial dosage or a full filling in cans, jars and, bottles., Depending on the product, the filler can be used for cold or hot filling., The system is constructed in a completely rust-free design. The dosing filler does not have its own, Belt body and can therefore be attached to an existing conveyor belt. ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

Annealing oven box furnace KU500 all4-PCB from the Switzerland The investment is for the production of thin-film - photovoltaic modules CIS / CIGS (module size 1250 x 650) bildungsportal. The task of the furnace is to anneal coated substrates in the production process. Cycle time 50 sec (first stage) Year of manufacture 2010 300 running BRA, mint already properly decomposed, which is not the original on the images, which has eight dry fan New price 306.000,-net

Altronic surface coating for architectural glass Swiss manufacturer as good as new very precise conditioning CA 300 BH Year of construction 2009 New price of the plant 334.000,-€ net lt invoice / without commissioning The robots of rice with touch Los hook are also for sale designed for the solar industry, to get very thin coatings of sulfur on solar modules Here, it was important to achieve accurate distribution, had also worked. equipped with 9 x Linearruetteler type E-PLF 0.65 IP54 Overall dimensions of the coating plant: 180 w x 220 d x 210 h Editing dimension: ca. 130 w x 160 cm possibly even a belt conveyor is available incl control and adjustment table,

Genset Model C22 D5, 22kVA Standby, 20kVA Prime, X2.5G2, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X2.5G2 Engine Air Cleaner - Duty Rating : Heavy Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144D, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coo ...

Fischerscope XRF X-RAY 5400 X-ray fluorescence - EDXRF spectrometer Year of manufacture 2010 2010/11 has measured with ca-400 hours of operation, only sporadically in a pilot plant (sputtering LEYBOLD) New price: 100.000 € 5400 x RAY X-ray fluorescence - spectrometer (EDXRF) are designed for use in industrial production facilities, specially designed for continuous measurement in the manufacturing process, to the non-destructive analysis and measurement of thin layers and layer systems. For the industrial requirements and continuous operation, they are particularly robust and low-maintenance design.