thin used for sale

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 460 x 350 x 200 mm, weight approx.: 70 kg

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Ladies and gentlemen, follow an offer for a field hospital. The equipment depends on the wishes of the buyer of the field hospital. Of course, containers can also be delivered instead of tents. Below and in the attached annexes, please refer to the corresponding configuration and components of a possible field hospital. They are welcome to adapt to their needs, accept or omit things. The field hospital for 100 people shown here. The equipment is basically optional. We are also happy to supply only the pure hardware component. We can also assist with the construction and operation at any time. If this product is of interest to you, we will be happy to provide you with a complete and detailed offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreement ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive  ...

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free o ...

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Number: VH503 Number: 1 piece Control cabinet for the continuous gas analysis for measuring gas preparation Cabinet disc is available and whole! Delivery possible by arrangement Make: ABB Type: unknown Extract of the component list: ABB Measuring gas conveying unit Advance SCC-F ABB Measuring gas cooler Advance SCC-C RITTAL Filter Fan SK 3326100 WINKLER Filter for electrically heated sample lines AF2055/06/200 DURAG 2 unit of operation & evaluator for combination probes D-RX 250 FESTO 2 valve & filter blocks Collecting container among other things, Dimensions:. 2000x800x650 mm (HxWxD) Weight:.. approx. 180 kg

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V

Baader Strip cutter Model: 381 Serial: 99-177-000 Stainless frame, belt width 270mm, overall length 1500mm, currently set for 17mm strip cut but can add blades for thinner cut, mobile, 3Ph

Eos EOSINT Here we offer an Eos EOSINT plastic laser sintering system. The following things are included with the EOS P380 system Installation space containers Powder containers Overflow container Cooler: Termo TEK Termochiller Type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Frequency 50 Hz Current value 8 kW Fuse 32 A MAX Power Laser 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

thread dia.: M5 - M16 mm : 250 U/min. : 48 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base. The data for this ad was created with ModulMWS - the  ...

width: 500 mm height: 300 mm depth: 570 mm CNC-Table Attachment Frame Producer: KOCEL Type: 2755 YOM: new Width: 500 mm Depth: 570 mm Height: 300 mm Weight: ca. 9 kg Number of CNC-tool holder slots: 16 Colour: RAL 5015 blue Additional information: - Patented, innovative universal-plug-in system: - Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past. • The frame is a solid steel-sheet metal construction and was welded firmly No Tool Holders included! The data for this ad was created with ModulMWS - the software solution of Log ...

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

VEMAG FSL-210 ID.NO. 2131 Vemag FSL-210 portioner of, among other things, fresh sausage with automatic sausage cutter. Suitable for natural, Collagen & Cellulose Intestine. Year of fashion 2011 very little used since new. Unusual machine that rarely comes out on the secondary market. Dimensions 205 x 80 cm H 165 cm

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

technical details: - Position: GL 360 (pos. 1) - Speed: 1,450 rpm = slow speed - Volume flow: 6,500 m³/h - Size: 355/4 - Power: 11 kW - Pg: 230 for air at +20°C and density = 1.2 kg/m³ - Voltage: 380/600 V (triangle/star) - Current: 22.5/13 A - Frequency: 50 Hz - Weight: 323 kg Metrics: - Housing (H x W x D): 1,475 x 800 x 1,260 mm (incl. motor) - Diameter suction nozzle (suction side): 380 mm - Diameter pressure connection (pressure side): 320 mm Transport dimensions (H x W x D): 1,630 x 800 x 1,200 mm (on EURO pallet) The fan was completely refurbished and painted in our house. Among other things, the motor shaft bearings were renewed. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

DH Robotics CGC-80 Centric Gripper Weight: 1500 g Payload: 1500 g The DH Robotics CGC-80 is an advanced three-finger gripper designed for industrial environments that require precision. With a stroke of 10 mm and a recommended payload of 1.5 kg, the three-finger design of the CGC-80 offers the ability to pick up and place hard-to-grip objects such as those with spherical or cylindrical shapes. The DH Robotics CGC-80 offers exceptional ease of use. Plug-ins are available for Universal Robots, OMRON, Hanwha, and more. Properties The DH Robotics CGC-80 is an advanced solution for three-finger centric gripping. Among other things, it offers a cost-effective way to grip cylindrical and spherical objects precisely and reliably. With a stroke of 10 mm and a maximum recommended payload of 1.5 kg, it is particularly suitable for applications in the electronics industry. In terms of ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2022, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , co ...

ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions.  ...

Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) � ...

Busch BL + BD30 Year 1997 Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2021, Model year: 2021, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses ,  ...

fully automated DC-646 Slitter/Cutter/Creaser is Duplo's mid-range solution. With its ability to slit/cut/crease, perforate, and fold digitally-printed applications in one pass, the DC-646 delivers professionally-finished jobs up to 30 sheets per minute. Cut job costs by doing away with time-consuming set ups and make-ready times. Finish jobs in quick turnarounds. Incredibly efficient and easy to use, the DC-646 produces a wide range of full-bleed applications from 24-up business cards to invitations and tickets on demand. Features Automated job set up and changeovers Lightweight paper crease module to process thinner stock Integrates with Fiery Impose to automate job preparation Perforating and in-line folding options for additional finishing

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2021, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fitting ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2022, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , co ...

Remko AMT 80-E Dehumidifier Construction Dryer No damp walls, musty odours and mould growth, dry quickly and sparingly at the touch of a button. Locations of the devices The devices are used wherever dry rooms are important and consequential economic damage (e.g. due to mould growth) is to be avoided. The devices are used, among other things, for drying and dehumidifying: ■ New buildings, industrial buildings ■ Basements, storage rooms ■ Archives, laboratories ■ Cottages, caravans ■ Bathing, washing, changing rooms, etc. The recirculating air fan sucks in the moist room air via the dust filter, evaporator and the condenser behind it. At the cold evaporator, heat is extracted from the room air and cooled down to below the dew point. The water vapour contained in the room air precipitates as condensate or frost on the evaporator fins. In order to avoid mois ...

Min size 10x10 mm Max size 260 x 280 mm Banding device In/line Busch BD30 Automatic banding device Min banding sizes 25 x 60 mm Max banding size 140 x 200 mm Speed 14 cycles per minute - 840.000 sheets per hour Banding width 20/30/40 mm Banding materials PE-foil Details operated by light curtain, once the operator pulls away their hands the machine will make a cycle, PLC diagnostics display readout for BD30 condition excellent Unit BD30 all pneumatic revised until leak free after order a few more things will be performed Available failry soon after order

Cartridge filters, among other things, for the filtering of paint dusts Manufacturer: Donaldson Torrit Type: DFT-18 Year of construction: 2004 Volume flow: 3.33 m³/s; 12,000 m³/h Power consumption: 11 kW Weight: 1.175 kg Fan: from 1980 (see nameplate)

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws