thickness used for sale

Frame Inner Dimension: 1450 x 1650mm Gas Type: Propane Operating pressure: 7 bar

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

THIMON Shrink Wrapping Machine Brand: THIMON Model: HOTPAL 2000 Year of commissioning: 2011 Cycle counter: 114,250 Gas type: Propane Heating power: 370 kW Installed power: 13 kVA Voltage: 400V TNS Frame dimensions: 1450 x 1650 mm Maximum pallet dimensions: 1000 x 1200 x 2650 mm Maximum gross pallet weight: 1500 kg Machine weight: 2200 kg Comment: Equipment supplied includes shrink frame, lifting table, and safety enclosure with light curtains. Very good condition. Maintained by the manufacturer.

roll diameter: ? mm throat: 280 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m No. 3849 Vertical bandsaw THIEL Thiel 17 Table 500 x 590 Clearance approx. 280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Rod lathes Thiel

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Sell a Thissen telescope. new Never been installed. For a 30NC-244.384, Ident No. 20761, Art.Nr.: A2976001, .VB

Thiel Produro 115 Filing machine - Infinitely variable stroke and speed adjustable - Stroke 40-120mm - Speed 60-300 min - Table swivel 15° - Weight approx. 500kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.

Two jigger dyeing machines from various manufacturers are available. 1) Thies type NT 2300, year of manufacture: 2015, max. working temperature: 98°C, max. fabric width: 2850mm, roller width: 3000mm, max. fabric length at thickness from 0.3mm: 3177mm. 2) MCS Maxi Jigger 98°, year of manufacture: 2021, batch liquor ratio: 1:2, roller diameter: 320mm, lower roller diameter: 139.7mm. Documentation available. An on-site inspection is possible. Individual sale is possible.

Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.

A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run.

25 x 850 ltr. VA2 transport tank, used, some standing, stackable, DOM above 400 mm, rest outlet with valve NW 50, operating pressure 1 bar, test pressure 1,5 bar, pressure relief valve in the lid, waterproof Druckbeständig for E.g. overlay with CO2 or CO2, weight/PCs.: 130 kg, inside cleaned, very stable design, diameter: 1 m, H:/1.52 m, price: â?¬850 plus VAT from stock Dolgesheim

Computer cabinet, control cabinet, terminal cabinet, terminal housing, control panel stand housing, control panel stand foot, stand column -Stand: stand housing for control desks / terminals -Execution: solid metal housing -Dimensions: see photos -Dimensions: 385/335/H730 mm -Weight: 32 kg

Height 2100 mm Width 1300 mm Length 3000 mm Capacity 450 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Stirrer Type Z Type Agitators Product ejection Ejection via hydraulic tilting of the mixer bowl Loading Loading integrated into the machine Mixer Type Open Mixer Number of rollers Twin shaft

weight of the machine ca.:15 t

roll diameter: 500 mm throat: 490 mm workpiece height: 220 mm table-size: 600 x 600 mm saw band length: 3350 mm turning speeds: 12 - 1900 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 1,95 m Band saw with - swivel table - Footswitch - Machine light - IDEAL welding device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Transfer in current condition as seen -Machine must: be overhauled electrically (FI circuit breaker trips) -Grinding points: 4 -Angled tables on vibrating tables: 3 -Vice for chip breaker groove: 1 -Max. Steel cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 1500/1500/H1400 mm -Weight: 1004 kg

A screen printing system is offered. This was extensively overhauled in 2016 and has rarely been used since then.

spindle bore: 40 mm Tools speed: 30...500 U/min oscillation frequency: 5001400 DH/min pressure: 60 kp accuracy +/-: 0,001 mm total power requirement: 6,4 kW - max. diam of work: 350 mm - max. diam for centerless work: 70 … 150 mm - max. worksize: d = 155 mm - work.length: max. 1000 mm - work.length,centerless: 300 mm - hole in spindle: 40 mm - speed of spindle: 30 … 500/ U/min // rpm - oscíllation frequency: 500 .. 1400 DH/min // DS per min - pressure: 60 kp - precision: 0,001 mm - load: 6,4 kW, 380/400~ - Spezifikation: Stock finishing tools incl. - high precision surface micro finishing of pistons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 300 mm throat: 450 mm table height: 480 mm saw band length: 3350 mm width of saw-band: 10 mm total power requirement: 2,2 kW weight of the machine ca.: 520 Kg dimensions of the machine ca.: 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll diameter: 300 mm Throat depth: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Table swivel: yes, partly in 2 directions Saw blade length: 3350 mm Saw band width: approx. 10 mm Belt speed: 15 – 125 m/min or 125 – 1000 m/min partially. infinitely variable Weight: approx. 700 kg Dimensions: 1000 × 700 × 1800 mm Equipment: -Integrated belt welding machine (IDEAL BS00) -Sharpening stone for deburring the weld seam -Stepless speed control

Thickness planers Back to overview - Print version WEIBERT WY-D41 Thickness planer WEIBERT WJ-D41 NEW MACHINE! 400V 4 KW (5,5 HP) n=4500 min Planing width of 406mm Planing shaft diameter 100mm Max.4mm Chip Removal 4-reversible blade shaft Passage height of 4-225mm Feed speed of 6 and 12m/min.with own engine 1.1 KW (1.5 hp) Suction connection of 120mm Machine weight of 370 kg Machine tables Planing shaft bearing block and table guide made of GREY CAST IRON Manual height adjustment with handwheel 2 rolls in the thickness table G&WJ-D41 relka 22 Request information material WEIBERT WY-D53 Thickness planer WEIBERT WJ-D53 NEW MACHINE! 400V 5.5 KW (7.5 HP) n=5000min Planing width of 530mm max.chip removal of 8mm Planing shaft D=125mm 4-reversible blade shaft Passage height of 3-300mm Feed speed of 8 and 16 m/min. Engine for feed 1.5 KW (2 hp) Sucti ...

Description - TERSA planer blade system enables particularly quiet operation. - Helical toothed steel feed roller for constant and uniform material intake - Two-speed material feed - Numerical display for thickness table height - The 2,000 mm long dressing tables enable easy dressing of large workpieces. - Work tables are made of grey cast iron, post-annealed and stress-free, making them insensitive and permanently flat - Sturdy large aluminium dressing stop with round bar guide (1200 x 160 mm) - Thickness table adjustment via handwheel with numerical display for the planing height - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Technical data Dimensions and weights Length (product) approx. 2000mm Width/depth (product) approx. 1110mm Height (product) approx. 1115mm Weight (net) app ...

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Description - With TERSA knife shaft for razor blade changes in seconds - TERSA planer blade system enables particularly quiet running - Helical toothed steel feed roller for constant and even wood feed - The particularly long dressing tables made of one piece enable easy dressing of the workpieces - Large dressing stop can stay in place when opening the dressing tables - Rear-opening dressing tables - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron constructionWork tables made of grey cast iron, after-annealed and stress-free, therefore insensitive and permanently flat - Table lips for quiet running Technical data Dimensions and weights Length (product) approx. 1725mm Width/depth (product) approx. 880mm Weight (net) approx. 270kg Dressing Total length of tables 1500mm Working height900mm Chip ...

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

Combined dressing and thickness planing machine from Hofmann with the legendary Leitz-Wigo spiral knife shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary With a "real" spiral wave. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment by handwheel Fluted steel feed roller rubberized pull-out roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife shaft with spiral-shaped, resharpenable HSS knives there are two sets of spiral knives, each built into matching pressure jaws. Resharpening is carried out by the sharpening service, and the sharpened knife sets are then simply screwed into the plani ...

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-D63 Thickness planer Planing width of 630mm 4-reversible knife shaft planing shaft D=125mm Knife shaft speed 5000 min/1 Thickness passage, min/max mm 3 to 300mm Motor planer shaft 9,5 KW 400V 50HZ Motor for electronic height adjustment of the thickness table with digital display Motor for feed 1.5 KW (2 HP) Max. chip removal of 8mm Passage height from 3-300mm Feed speed from 5 to 21 m/min. Suction nozzle of 160mm Machine table, planer shaft bearing block and table guide made of cast iron! External dimensions L=900 W=1120 H=1145 mm Total weight 1100kg G&WJ-D63 Optional spiral planing shaft G&WJ-D63-SPIRAL

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

WEIBERT WJ-D53 Thickness planer Planing width of 530mm n=5000min 4 knife shaft Tersa n=5000min Planer shaft D=125mm Max. chip removal of 8mm Passage height from 3-300mm Feed speed of 8 and 16 m/min. Motor for feed 1.5 KW (2 HP) Suction nozzle of 160mm Electronic height adjustment of the thickness table with display Machine table, planing shaft bearing block and table guide made of Cast iron! Numerical display of the planing height Long thickness table Motor 5.5KW 400V 50HZ G&WJ-D53

Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Key data: 630 mm, 250 mm, 8 kW

Hofmann D632 Thickness Planer Brand: Hofmann Type D632 M-No.: 2533 Year of manufacture 2005 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Circle ø125 mm Planing width 625 mm Planing thickness 3.5 - 275 mm Spahn removal max. 8 mm Thickness table length 1,000 mm Feed rate 7-14 m/min. Weight 980 KG

Key data: 630 mm, 280 mm, 8 kW

Martin T44 Thickness Planer Brand Martin Type T44 M-No.: V 257340 Year of Make: 1999 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 630 mm Planing thickness 2.8 - 280 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 2 speeds 6 / 12 m/min, Weight 1,500 KG

Demonstration machineThe thickness planer Holzprofi DMS53 is characterized by its sturdy construction, the strong machine casting table with sanded surface and modern handling. Electric thickness table adjustment with displayIncl. 2 adjustable under-table rollersCE compliant, made in EU! Technical data:Table dimensions 530 x 950 mmMax. Chip removal 8 mmPlaning thickness 3 - 300 mmFeed speed 8 / 16 m/minPlaning shaft diameter 125 mmPlaning shaft speed 5000 rpmNumber

Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage.

Technical data Manufacturer: BGU Maschinen / Südharzer Maschinenbau GmbH Type: KAD 532 Factory number: 4179677 Design: combined dressing and thickness planing machine Planing width: 530 mm Max. chip thickness: 5 mm Max. passage height: 220 mm Planing shaft diameter: 100 mm Knife shaft speed: 5400 rpm Feed: 7 / 8.5 m/min Motor power: 5.5 kW Rated current: 8.5 A Operating voltage: 400 V Suction nozzle: Ø 120 mm Dimensions: approx. 2000 x 760 x 850 mm Weight: approx. 510 kg Configuration With dressing and thickness function, rip fence, suction connection and electric brake. Operating instructions available. Auction-ID: A1-50026-32

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V