thick used for sale

used, kpl. 1 year warranty, plate size 300 x 300 mm, 10 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 20 liters, filter area 1.5 m2, dimensions 1200 x 600 x 600 mm, weight 400 kg, optionally with manual or motor hydraulics, available now

ENTRY STRIP THICKNESS: MAX. 12 MM, EXIT THICKNESS: 1.8 MM, STRIP WIDTH: 1000 - 1500 MM, AGC SYSTEM (2000), COMPLETE LINE!

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

used, kpl. 1 year warranty, built in 1999, plate size 1200 x 1200 mm, 70 plates with 50mm cake thickness (3500 liters capacity + 160 m2 filter area) or 90 plates with 30 mm cake thickness (2700 liters capacity + 205 m2 filter area), open outlet, pressure max. 15 bar, dimensions 9000 x 2000 x 2400 m m, weight approx. 18 to, PP - drip plate (motorized)

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

DIA. RANGE: 12.7 - 50.8 MM; STRIP WIDTH: 165 MM, THICKNESS: 0.6 - 2.0 MM; COIL WEIGHT: 500 KG, 60 M/MIN., ETC.

We have about 50 rolls of Sylomer fleece rolls in stock Role Dimensions: Width: 1.90 m Length: 34.00 m Thickness: 10 mm These nonwoven rollers are suitable for e.g. : - track construction - the interception of vibrations - for footfall sound insulation - for a wide range of use in the construction sector - and much more Price on a negotiation basis!

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

technical data: Pieces: approx. 50 Purpose: for MN 180 Diameter: 570 mm Sheet thickness: 3.6 mm Cutting joint: 5.2 mm Number of teeth: 16 Lateral supernatry HM cutting: 0.7 - 0.8 mm

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 60 plates, open or closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 576 liters, filter area 40m2, dimensions 4800 x 1200 x 1200 mm, weight 2.5 tons, motor hydraulics, drip plate, filtrate channel, with or without Filter cloths

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Attachment: Chamber filter press - as good as new, demonstrator Hours of operation: No Usage area: Chamber filter press, pilot plant, wine press Design: page Holm led Filter plate format: 390 x 390 mm Plate number: 14 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 2.8 m sq Presses contents: approx. 35 dm3 PCB package length: 391 mm Filter pressure: 15 PSI Plate transport: manually Frame: Steel Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 1695 x 750 x 630 mm Weight: 610 kg (photo identical plant) Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Attachment: Chamber filter press used Usage area: Chamber filter press, pilot plant Design: page Holm led Filter plate format: 400 x 400 mm Plate number: 15 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.0 m square Presses contents: approx. 37 dm3 PCB package length: 700 mm Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available.

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

R25972/18 GUSCHKY spiral sleeve wap-around arrangement age: 1990 available: immediately wap-around machine manufacturer: Guschky technical details: region inside diameter 20-100mm region wall thickness 5mm Max. belt speed 50 m/min Motor speed ca. 10 kW voltage 220V Three phase system electricity 50 Hz Air pressure 6 bar -------------------- pneum. saw: manufacturer: Guschky age: 1990 technical details: region inside diameter 20-100 region wall thickness 4.5mm Sleeve length 400 – 6100 mm --------------------- Unwinder and Gluestation manufacturer: Gasser age: 1986 technical details: gluer dip coating Number paperweb 8 + 1 seperate cover web Available: sofort

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact  ...

Hydraulic Straight Side Press P 313 Manufacturer: Russian Maker Model: P 313 Year of manufacture: 1985 Very good condition, after general overhaul in 2011! Machine with new electrics! our stock Rudniki Technical details : Max.Force: 250T Table: 1400x1700mm Slider stroke: 600mm Distance between table and slider: 1060mm Table thickness: 160mm Slider idle stroke: 290mm/sec. Slider working feed: 12mm/sec. Slider return: 150mm/sec. Daylight between columns: 1700mm Ejectror’s speed: 100mm/sec. Main motor: 40kW Press dimensions: 3665x2890x5200mm Press weight: 28.000kg

We produce stone forecastle records (cooker-flat) Bakeplates for everything type from ovens: -MIWE -WP merchant quail -Debag -Sveba Dahlen -Daub -Heuft and other proficient ones. also stoves for pizza and fur ordered in another dimension (length, width, thickness) ... our panels a perfectly smooth surface are marked, are resistant to mechanical pushes, do not carry during the use, a very long life span. users praise good baking quality.

Compact bag machine Technical data: Nominal width: 420 mm Working width: 400 mm Flow speed: 7 m / min, depending on the film Bag length: 15 mm to 4000 mm Foil thickness: 2 x 10 in the 2 x 100 in the Slide material: LDPE, HDPE (others determine by tests) Film type: flat film (others determine by tests) Max film roll: Ø 400 mm Schweißschine Oberschine pulse heated against attempts on the bottom blade Welding seam width shrink seam Air consumption: no compressed air required Dimensions (WxHxD): approx. 800x480x600mm (without base plate) Supply voltage: 230 Volt, 50/60 Hz Protection: 16 A, slow-blow The advantages at a glance: Outstanding price / performance ratio quick and easy to use no compressed air required precise stepper touch screen to set up all parameters (feed, stroke, welding and cooling time, quantity) switched it can compact, small design of easier film roles c ...

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Attachment: Chamber filter press used Type: Rittershaus & Baldwin AEHIS 1200 Design: bridges Holm Filter plates sizes: 1200 x 1200 mm Plate number: 35 Filter plates: PP Thickness: 30 mm Schedule: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. 85 m ² Presses contents: approx. 1200 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Pump technology: optional Dimensions: L 5800 x B 1900 (2550) x H 2500 (2900) mm Accessories: filter cloth car wash, optional light barrier Extra services: On this complex warranty months 6-12. Condition: The unit is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work.

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEH 800 x 800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 20 mm Filter pressure: 15 bar Closing pressure: Min. 240 bar / max. 300 bar Total filter area: 64 m2 Cake volume totalling: 640 litres

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 30 mm Useful length: 3500 mm Chamber number: 58 pieces Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Total filter area: approx. 1.8 m3 Expiration: closed Plate material: PP Filter cloth cleaning system: optional Filter cloths: optional

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 71 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloth cleaning system: yes Filter cloths: optional Membrane mix package incl. control cabinet, filling pumps, membrane pressure pumps The facility is in very good condition.