thermoforming used for sale

Max. draw-off length: 320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5500mm, width: 1200mm, height: 2000mm, without tools.

Nominal power: 19kW, an inspection is possible.

Manufacturer: Villa Model: NPO 120 Year of construction - 2002 Forming Area:: 560x500mm Film Width: 560mm Foil thickness: min 0,2mm - max.0.9mm Depth of draw pos/neg: 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use Location: Bucharest, Romania, 050192 Other details: - forming - cutting - the documentation in original + scan pdf. - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - cycle time: min 5, max 18/minut - weight of the machine ca.: 1,2 t - space requirements of the machine approx.: 5,3x2,5x2,5m

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation in original (5 books) + scanned (PDF files) - a lot of spare parts - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - dry cycle strocke / min ...

Automatic Roll-Fed Kiefel KMV 50D machine Year: 2002 Maximum forming area: 500 x 350 mm Minimum forming area: 300 x 100 mm Max tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Suitable materials: PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET Maximum sheet width: 545 mm A / B stacker Pressures Max. Max. 2.5 bar Cycles / min: 35 Approx. Length: 10,300mm Approx width: 2100 mm Approx.Height: 2200mm Weight: 6700 kg Machine in production

I will sell a practically new machine for the production of foil gloves. Connected for testing purposes only. To see in Łochów, province. Masovian Voivodeship

A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;

Little used automatic horizontal packaging machine Enflex F-19 for shaping and filling bags of heat-sealed foils. The machine is equipped with a device for gluing plastic zippers. The machine is without a discharge conveyor and a dispenser. Bag size width - min. 80 mm / max.190 mm height - min.120 mm / max. 300 mm bottom - min 40 mm / max 100 mm weld width top weld 6 mm, vertical weld 9 mm Machine output 30 to 50 bags per minute

Manufacturer Kramer & Grebe Year 2000 Located in Turkey Machine is in very good condition Moulding width : 555 mm bobbin width : 565 mm

Complete set and technical characteristics of the car: Format Tool: - Format 3 pieces 1-2, 2-2, 3.2 - Package height 5 / 35-15 / 45 mm, spacers 5 mm each - The bottom of the tray is even, smooth - Perimetric sealing plate - Packing type MGS - Type of the bottom film - soft (re-equipment on a rigid film is possible). - Productivity up to 6 cycles per minute General characteristics - Film width 420 mm (+ 2 / + 4) - Film thickness up to 300 microns - Width 650 mm - Height 2200 mm - Frame length 5600 mm 7 color touch screen control panel in Russian Possibility to store 20 programs password to access settings (three levels) display of the current state of the machine program test, washing program at closed stations (30 ° C) Unwinder bottom film for 3 cores, max. Ø 400 mm compressed air - Preheat film on top - Laying length 1500 mm - Vacuum pump Busch R5 100 m3 / h ...

The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);

Multivac T700 automatic traysealer (skin) Excellent high-speed traysealer from Multivac. This pre-owned T700 is in very good working condition and is from 2014. The automatic traysealers from MULTIVAC are suitable for industrial use – for packaging foodstuffs, medical and pharmaceutical products, and industrial and consumer goods. They seal trays made from various materials, such as plastic, aluminum, cardboard, and foamed materials, as well as a large variety of cover films. These machines enable a fast and efficient pack output with gentle tray handling. Shipped without tool; Optional: New Busch 360m3/h vacuum pump; Infeed conveyor belt; Power 4,2 kW Power supply 400/230 V Height 2100 mm Width 1000 mm Length 4900 mm Weight 1300 kg

Multivac R 145: Thermoformer 2017 production. Production Germany. The machine is operational. Tray molds included.

Kramer + Grebe thermoformer, type: 3000/430, year of construction: 1991, 380 V, 3 Ph, 50 Hz, 20-25 A, Kortho Hot Printer Tiromat container with parts for thermoformer among other, large amount of dyes, consisting of: (1x) 380 mm x 215 mm, (2x) 225 mm x 180 mm, (4x) 18

Form, fill and seal machine for berlingots Form, fill and seal machine for berlingots (with or without spout) of flat pvc or eva film or any film that can be sealed by radiofrequency. Radiofrequency sealing system that allows a very good quality of longitudinal sealing and transversal sealing/cutting. Fully PLC controlled and all operating parameters can be adjusted from the touch screen. Thanks to its specific dosing unit, any kind of aggressive products can be packaged on this machine. All parts in contact with the product are made of stainless steel. Production output: 1800 to 3000 Bags/H Bag volume: from 50 to 500 ml Bag length: 70 to 265 mm Max. outside diameter of the reel: 400 mm Inner diameter: 76 mm Including product outlet belt WIRING DIAGRAMS AVAILABLE

The machine is in production. Fully functional in very good condition. Only used once a week. Pump Busch R5 300m3 5 tools: see drawings There is also a new compressed air compressor.

Thermoformer Dixie Union - 15x31cm Adjusted film tensioner. Lubricated buttons. Change the lower part of the plastic suction cup. Installed new air hoses. Replaced bellows + adjusted knife. Tools, 15x31cm (2 compartments)

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

Year 2011. (Not exploited) Types of packaging: • Flexible packaging • Semi-rigid packaging • Tight packaging Medium to high performance. • Ability to use various materials, such as flexible film, PS, PETS, PVC, HIPS, etc. • Maximum cycle speed of 18 cycles per minute for soft blister packaging and 10 cycles per minute for rigid blister packaging • Web width 400 mm • Cut length up to 320 mm • Depth molding 80 mm • Servo chain • Stainless steel construction.

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Thermoformer Skin ULMA TFS 300 which has normally been modified to TFS 407 Year 2012 Width 422mm Feed pitch 250mm Dimensions: (L) 5.7m x (W) 1m x (H) 2m Two tools Selvedge rewinders Integrated labelling module

It is after renovation, and after replacing the control with relays The machine is in perfect condition It has gassing - protective atmosphere - MAP 320mm film Mold 300mm x 300mm Mold 2 x 150mm x 300mm Supplied with a vacuum pump and 2 km of foil.

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

Packaging machine (2008),but its in a very good condition, its like new because of the low useage. Our company had used it for packaging disposable medical devices. Every year we have done the necessary maintenance work on it. This machine is suitable for packaging in soft and hard folien as well.

Use PackLine PD4 Premade Horizontal Form Fill Seal with: Operate with fillers for liquid, dry or powdered paste and hot products. Output: 35-40 Pouches per minute Compressed air: 500 liters per minute (2) Seal bar width: 10 inches Bag size: 8.1 inches x 10.24 inches Voltage 208 Electrical Phase 3Ph Hertz 60Hz

Multivac R085 Seeking an entry-level thermoformer with exceptional adaptability? Look no further than the Multivac R085! This powerful machine seamlessly integrates into diverse production lines, tackling standard applications with an impressive level of configuration. Unmatched Versatility: 5 Diverse Tooling Options: Choose from 1×1, 1×3, 2×2, 4×1, or 4×2 configurations to perfectly suit your packaging needs. Flexible Packaging Sizes: Create packages ranging from 100×97.75mm to 375x185mm, accommodating various products. Adjustable Forming Depth: Adapt to product heights up to 80mm for optimal presentation and protection. Additional Highlights: User-Friendly Operation: Streamline your workflow with an intuitive interface. Durable Construction: Built to last in demanding production environments. Cost-Effective Solution: Ideal for businesses seeking performance without break ...

Inv. Num. : 6788 Type: GN1406TM Producer: GN Canada Created: 2016 Parameters: Equipment: Refrigeration unit EURO CHILLER GC A 015 Extensions for plastic coffee mats (80 mm) Moulding area: 320 mm x 150 mm Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material thickness range: 0.25mm-1.2mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 Machine dimensions: 2400 mm x 1750 mm x 2050 mm Machine weight: 1000 kg After overhauling the main shaft and the motor, the machine is

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

Viara Futura 1400 mm welding machine, year 2010, complete with folding strap for higher switching, suitable for heavy bags or industrial plugs, bag thickness mm.100-4000, weldable materials ldpe/hdpe/mdpe weldable thickness: 30/400 my.Currently original Viara perforator. Replaced last month: rubber calander complete with caps, two air blowers, overhaul of the welding from the side of Viare, replaced screen for machine control, new tape for assembly, aluminium rollers available for assembly, machine prema EEC standardima, large production capacity, visible in the range, without hydraulic undercut, or with metal construction on sale where rolls can be placed, available from September

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Thermoforming machine for small cups of olive oil, ham, honey etc. Themachine make the full process with thermoforming, filling , sealing and cutting. PLC and Touchscreen, dosing with servomotor. Electric photocell for spot. Top brands in electronic components, as Omron, Datalogic, Panasonic, Schneider. Further information please contact. we produce it in Spain. The machine is tested some years ago, good thermoforming with PET, dosing with no dropping and good sealing and easy open. Production depending of each model.

– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

Thermoforming cfs powerpak rt. Hot product packaging, vacuum by steam. Rigid film, mechanical assistance. Welding. automatic labelling. Two rigid cutting by takes part. Nibbling the edges. Like new.

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Blister thermoforing machine for PET for olive oil, jam, chocolate cream. Thermoforming machine for Minidose. Up to 12.000 pcs per hour. Spanish production. Best components as Panasonic, Omron, Datalogic, etc. BP Machinery, experience from 10 years ago. More information please contact.,

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

Used CFS Compact 420. This machine is a professional automatic thermoforming line, which is used for vacuum packaging of almost all kinds of meat products, fish and seafood, cheeses, salads, vegetables, fruit, confectionery and other food products. Operating principle The packaging is formed automatically by the machine from two films - top and bottom. The product is placed by the operator in cells made of bottom film. The product is automatically sucked out by a vacuum system, sealed, cut and labelled (optional). Forming of trays of different types and sizes is carried out by manual mould change. The operator can program the step, speed, time, temperature and vacuum level. The machine is adapted to work on soft film. Width of film: 420 mm Capacity: 8-10 tacts per minute Mould dimensions: Division 2.2 Dimensions of a single tray: 195 x 115 mm Stroke advance: 250 mm B ...

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Thermoforming machine completely rebuilt and revised in its entirety re-release. Manufacturer: DIXIE (GEA GROUP), model: VA2000. Construction aspects: Built in stainless steel materials. EC type-approval. Hygienic design, IP-62. Ease of use and maintenance: High performance. Quick format change, no tools. Operating programs. Programmable feed speed. Minimal maintenance. Vacuum pump BECKER 160 m3/H. Dimensions of the container to be formed inside (format): 150 mm x 120 mm x 4 units per cycle. Overall dimensions: 5600 mm long x 1100 mm wide x 1720 mm high. Suction device for excess film. Electrical power. 380v, 50HZ, 25-35A,

LIQUIDATION of thermoforming packaging machine completely rebuilt and revised in its entirety re-release. Manufacturer: CFS- KRAMER GREBE- TIROMAT, model: 2500/320. Construction aspects: Built in stainless steel materials. EC type-approval. Hygienic design, IP-62. Ease of use and maintenance: High performance. Quick format change, no tools. Operating programs. Programmable feed speed. Minimal maintenance. Vacuum pump 250 m3/H. Dimensions of the tray to be formed (format): 280 mm x 220 mm. Overall dimensions: 5700 mm long x 900 mm wide x 1920 mm high. Suction device for excess film. Electrical power. 380v, 50HZ, 25-35A,